Maz Ver. 3.2

[morser]

Hi morser,
I've tried to search info about all_channel.dat field structure but the only document I've found is the .h file in TVAPI SDK.
Please I ask to You (because You already managed this file) if the following structure "channel_list_st" is corresponding with all_channels.dat field structure.

Thanks

typedef struct channel_list_st {
HX_INT16 version;
/********************************************************************
* About select_tuner
* 	examples: 	SELECT_TUNER_ALL, SELECT_TUNER_0(A), SELECT_TUNER_1(B),
*				SELECT_TUNER_2,SELECT_TUNER_3
*********************************************************************/
HX_INT8 select_tuner;

#ifdef _USE_EMBEDDED_IVOS
HX_INT8 use_sort_list;
// ALL_CH_LIST, CAS, PROVIDER, Alphabet, TRANSPONDER, 
#else
HX_INT8 reserved;
#endif

HX_UINT16 bouquet_id;

/********************************************************************
* About use_group_list
*
* 	examples: 	GROUP_LIST_ALL_CH,GROUP_LIST_SATELLITE_CH,GROUP_LIST_GENRE_CH,
*				GROUP_LIST_PROVIDER_CH,GROUP_LIST_COUNTRY_CH,GROUP_LIST_FTACAS_CH, GROUP_LIST_FAV_CH
*********************************************************************/
HX_INT8 use_group_list; 


/********************************************************************
* About service_type
*
* 	examples: SERVICE_TYPE_TV,	SERVICE_TYPE_RADIO, etc
*********************************************************************/
HX_UINT8 service_type;

HX_UINT8 net_index;


/********************************************************************
* About sub_group_id
* Select 'use_group_list' for ID
* examples: provider_info.id, genre_info.id, country_info.id, favorite_group_info.id, etc
*********************************************************************/

HX_INT16 sub_group_id;

struct channel_group_st provider_info[MAX_PROVIDER];
HX_INT16 provider_number;

struct channel_group_st genre_info[MAX_GENRE];
HX_INT16 genre_number;

struct channel_group_st country_info[MAX_COUNTRY];
HX_INT16 country_number;

struct channel_group_st favorite_group_info[MAX_FAV];
HX_INT8 favorite_group_number;

/********************************************************************
* About vch_type
* 	examples: VINDEX_TYPE_DEFAULT, VINDEX_TYPE_TV , VINDEX_TYPE_RADIO, 
VINDEX_TYPE_USER ,FAV...
*********************************************************************/

HX_INT16 vch_type; 		/* 	0 	: default original_vch 
1   : digital television
2	: digital radio sound 
3	: USER  				
10 ~ 59 : fav_vch 
*/
/********************************************************************
* About *vch
* select 'virtual_channel_st'
* 	examples: original_vch, tv_vch , radio_vch, favorite_vch[i],user_vch
*********************************************************************/

struct virtual_channel_st *vch; //current list
HX_INT16 *vnumber;

struct virtual_channel_st original_vch[MAX_CHANNEL];
HX_INT16 original_vnumber;

struct virtual_channel_st tv_vch[MAX_TV_CHANNEL];
HX_INT16 tv_vnumber;

struct virtual_channel_st radio_vch[MAX_RADIO_CHANNEL];
HX_INT16 radio_vnumber;

struct virtual_channel_st favorite_vch[MAX_FAV][MAX_FAV_NUM];
HX_INT16 favorite_vnumber[MAX_FAV];

struct virtual_channel_st user_vch[MAX_CHANNEL];
HX_INT16 user_vnumber;

struct virtual_channel_st promo_vch[MAX_PROMO_CHANNEL];
HX_INT16 promo_vnumber;

HX_UINT16 network_num;
struct network_ch_st network;

}stChannelList;

Yes, that is the structure.

 

[eltoreri]

Cuando abro el Maz3 me aparecen en blanco firmware, plugins y novedades. Si le doy a la flecha verde en frimware me sale "violación en el 00421..." ¿Me podriais ayudar?.Saludos

 

[tacoli]

Una preguntilla con el MAZ puedo cambiar el FREEWARE del AZ o tengo k hacerlo como siempre con el USB....

 

[shilux]

Hola buenas cuando pongo el maz me sale un mesaje ke dice "Illegal puerto" y no me conecta via ftp, alguien sabe como se soluciona eso??? Gracias.

 

[morser]

Hola buenas cuando pongo el maz me sale un mesaje ke dice "Illegal puerto" y no me conecta via ftp, alguien sabe como se soluciona eso??? Gracias.

Si, cambia la configuracion de FTP pasivo.

 

[shilux]

Gracias por responder en cuanto pueda lo pruebo y posteo el resultado.

 

[pepeli]

Hola,

Gracias morser por tu generosidada vaya programa, la caña.

Una duda, no sé si es que la última lista (body12/06) tiene algo mal pero al intentar borrar varios satelites (boton derecho en listado canales) se que me queda pillado, programa no responde. Perdón si ya se comentó y muchas gracias.

Saludos,

 

[odinator]

Hola,

Gracias morser por tu generosidada vaya programa, la caña.

Una duda, no sé si es que la última lista (body12/06) tiene algo mal pero al intentar borrar varios satelites (boton derecho en listado canales) se que me queda pillado, programa no responde. Perdón si ya se comentó y muchas gracias.

Saludos,

Eso sólo pasa si intentas borrar el último satélite.
Con los otros no hay problema.
Puedes borrar, incluso, varios a la vez.
Un saludo

 

[shilux]

Todo solucionado muxa gracias por la ayuda.

 

[buyukbang]

Hi friends,

Sorry this will be in English,

First of all, great thanks to Morser and all people who have contributed to this wonderful tool Maz 3.0. I really like it, Maz is filling a big hole in Azbox world !

I need your help with the following problems:

I was using 4931, but I had a problem with latest 3-4 firmwares as I reported here: http://forum.azbox.com/index.php/topic,519.0.html I decided to reinstall firmware without restoring settings and remake all settings which I hope fix this problem.

Anyway, I formated azbox and installed latest firmware 4931 and downloaded channels from kingofsat with Maz 3.0 for sats E5.0, E7.0, E13.0, E19.2, E42.0. All channels are added to channe list. I've now two problems:

1- I got "No signal" message for some channels that I normally watch with my old settings that I backed up. For example National Geographic Türk HD and DiziMax More HD (see top line of http://tr.kingofsat.net/pack-digiturk.php) AFAIK, Maz automatically adds TPs when downloading channels from Kingofsat, right?

2- When zapping between watchable channels I got "No signal" messages. I don't have this problem with my channel files on 4931, zapping was like a fluid.

3- When zapping between watchable channels I got a jerky or frozen picture for 5-10 seconds. This problem does not exist with my old channel list files on 4931.

Am I missing something?


Thanks !

 

[buyukbang]

Solved all the problems by deleting default sattelites that I want to download from kingofsat. AFAIU azbox does not allow a new TP with close frequencies. So new tp's cannot be add by maz if there are close frequencies. This makes some channels unstable. But deleting all channel and sats for a fresh start solved the problems.

Cheers...

Hi friends,

Sorry this will be in English,

First of all, great thanks to Morser and all people who have contributed to this wonderful tool Maz 3.0. I really like it, Maz is filling a big hole in Azbox world !

I need your help with the following problems:

I was using 4931, but I had a problem with latest 3-4 firmwares as I reported here: [URL]http://forum.azbox.com/index.php/topic,519.0.html[/URL] I decided to reinstall firmware without restoring settings and remake all settings which I hope fix this problem.

Anyway, I formated azbox and installed latest firmware 4931 and downloaded channels from kingofsat with Maz 3.0 for sats E5.0, E7.0, E13.0, E19.2, E42.0. All channels are added to channe list. I've now two problems:

1- I got "No signal" message for some channels that I normally watch with my old settings that I backed up. For example National Geographic Türk HD and DiziMax More HD (see top line of [URL]http://tr.kingofsat.net/pack-digiturk.php[/URL]) AFAIK, Maz automatically adds TPs when downloading channels from Kingofsat, right?

2- When zapping between watchable channels I got "No signal" messages. I don't have this problem with my channel files on 4931, zapping was like a fluid.

3- When zapping between watchable channels I got a jerky or frozen picture for 5-10 seconds. This problem does not exist with my old channel list files on 4931.

Am I missing something?


Thanks !

 

[andy2005]

Buyukbang: I have got a similar experience with firmware 4931 and Maz software.
When I upload the channel updated by kingofsat within the Maz software I get some strange behaviour on the decoder. It seems like it is not able to correctly find some of the channels.

After a a couple of intense days, I decided not to upload channel with Maz. Reinstalled everything and started my own llist with the decoder. Took a few hours more but the result is more than decent. The problem of finding channel is almost eradicated.

There must be something in the way MAz arrange channels that is not fully compatible with the firmware 4931.

If somebody find a better solution, that would be excellent

For my two cents.

 

[ogalla]

Hola compis: No se a que será debido, que hoy estoy conectando el Maz y me conecta a medias. Cuando le doy para abrir una carpeta, me dice que no puede abrirla. Al principio al abrir, me sale "Socket error # 10054" Tambien sale "connection reset by peer".
Espero me digais algo.
PD. He observado que el deco se tira un ratito para reconocer el HD y una vez lo reconoce, me dice que no puedo ver lo grabado. Gracias...

 

[ogalla]

morser: ¿Podrías echarme una mano?Esto es lo que sale cuando abro el Maz y no me conecta.

 

[ogalla]

Perdonar que lo suba, pero es que lo he editado y no se si estará en nuevos mensajes.

 

[morser]

No se porque te sale eso en ese momento. Le tienes marcada la opcion de conectar con el deco al iniciar? si es asi, tienes un problema de conexion con el deco, revisa la direccion IP, user y password, firewall, etc.

 

[oscar_fl]

Prueba a marcar el pasive ftp

 

[ogalla]

Todo revisado y normalizado, firewall, IP, etc. y no conecta. No se que puede ser, ya que empezó ayer sin ningún motivo aparente. ¿Podría ser la última MultiCAS que la he bajado desde el deco?. Es que no le encuentro sentido.

 

[ogalla]

Todo está perfecto, comprobado y requetecomprobado, pero sigue saliendo esa ventana. El DCC conecta muy bien salvo cuando pincho en lo grabado, que se queda en blanco. Quisiera solucionarlo, ya que para la lista de canales, es maravilloso y que yo sepa no hay otro. Gracias compis.

P.D. Con el Maz, se encienden la camd, FLASH Y HD, pero no da conección.

 

[morser]

Estas seguro de que tienes activado el ftp en el deco? parece ser que por telnet si te conecta bien pero falla el ftp, intenta conectarte con filezilla u otro cliente ftp a ver que te dice.