O dejo manual para instalar imagen OpenSPA en vuestros H7 mediante pendrive.
1. Bajar imagen desde https://openspa.webhop.info/
2. Descomprimir archivo y copiar la carpeta zgemma en la raiz del pendrive (formateado en FAT32).
3. Desconectar el H7 de la corriente (interruptor trasero en OFF)
4. Insertar pendrive en uno de los puertos usb traseros
5. Manteniendo pulsado el botón power del frontal del deco (abrir tapa frontal), conectar el H7 a la corriente (interruptor trasero en ON).
6. Cuando aparezca FLSH en el display, soltar el botón power. Dejar que instale la nueva imagen y que el deco se reinicie solo.
7. Quitar el pendrive.
Importante : NO desconectar el deco de la corriente mientras el deco esté flasheando (FLSH en el display)
--------------------------------------------------------------
Here the manual to install OpenSPA in your H7 box with pendrive.
1. Download image from https://openspa.webhop.info/
2. Unzip file and copy zgemma folder in the root of pendrive (formatted in FAT32).
3. Switch off power (rear switch to OFF)
4. Insert pendrive into one of the rear USB ports
5. Holding down the power button on the front of the box (open front cover), switch on the power (rear switch on ON).
6. When FLSH appears at display, release the power button. Let it install the new image and let the box reboot itself.
7. Remove the pendrive.
Important: DO NOT switch off power while the box is flashing (FLSH in the display)
1. Bajar imagen desde https://openspa.webhop.info/
2. Descomprimir archivo y copiar la carpeta zgemma en la raiz del pendrive (formateado en FAT32).
3. Desconectar el H7 de la corriente (interruptor trasero en OFF)
4. Insertar pendrive en uno de los puertos usb traseros
5. Manteniendo pulsado el botón power del frontal del deco (abrir tapa frontal), conectar el H7 a la corriente (interruptor trasero en ON).
6. Cuando aparezca FLSH en el display, soltar el botón power. Dejar que instale la nueva imagen y que el deco se reinicie solo.
7. Quitar el pendrive.
Importante : NO desconectar el deco de la corriente mientras el deco esté flasheando (FLSH en el display)
--------------------------------------------------------------
Here the manual to install OpenSPA in your H7 box with pendrive.
1. Download image from https://openspa.webhop.info/
2. Unzip file and copy zgemma folder in the root of pendrive (formatted in FAT32).
3. Switch off power (rear switch to OFF)
4. Insert pendrive into one of the rear USB ports
5. Holding down the power button on the front of the box (open front cover), switch on the power (rear switch on ON).
6. When FLSH appears at display, release the power button. Let it install the new image and let the box reboot itself.
7. Remove the pendrive.
Important: DO NOT switch off power while the box is flashing (FLSH in the display)
Última edición: