- 7 Abr 2009
- 432
- 32
- 0
Nueva Multicast 161C-A08
- Iniciador del tema windwind
- Fecha de inicio
- 10 Abr 2009
- 1.334
- 9
- 0
Now we have a possibility to put in the newcamd server details, too!
It is possible to sort it all out via remote:
Home -> Plug-ins -> OpenXCAS -> Camd Setup -> MultiCAS -> Smartcard Interface -> SC Splitter and CS -> roll the options to Client CCcam or Client NewCamd and add as required...
The relevant config files to discuss:
cardreader.cfg
newcamd.cfg
One way of editing it all is using telesat's MultiCAS Edit.
================================================
Here is the "how to" for 2 more options, from how to install it to how to edit it - easily:
0) Home -> Plug-ins -> OpenXCAS -> no more Manual Install option, guys! It is now DOWNLOAD EXECUTABLE -> you will see the links of support servers to get your plug-ins there, guys... [ get it from [url]http://azboxworld.com[/URL] ]
1) Download and install: MultiCAS 160... well, the latest - always!
2) Get the configuration files for camd/CS SW from DOWNLOAD CONFIG. So, one must download MultiCAS CCcam config files. But not needed for this one, if you had the previous version of MultiCAS already installed and it was all functioning.
At this point it is good to reboot your AZbox HD!
3) So, off we go to Home -> Plug-ins -> [as described above...] -> MultiCAS -> using your remote control -> Smart Card Splitter and CS.
4) Change the following, using your REMOTE:
-change the Mode to Client CCcam [if, like me, you have no smartcard to play with and share] - you can connect to other people's servers
-choose Server No. 1 [when done with the first one, move this one to 2, then 3 etc. - as many as you need, up to 16, I think...]
-choose Host Name Use - write something like: something.dyndns.org [whatever the data you get from your server/peer is, like gorski.dyndns.org or whatever your server is called like - I DO NOT HAVE A SERVER, THIS IS ONLY AN EXAMPLE!!!],
-choose the Port - 12000 or whatever it is that your peer tells you to use
-User Name - whatever it is [you must have a username that normally your peer gives you and put in his server to allow you access to his server]
-Password - whatever it is [like above]
-Server - Enable
-Connect - test it [but only AFTER I enabled the one which appears below it, on the TV screen...]
It should say "login success"...
Repeat for all the servers you have, to check...
Red Button = Save.
5) But still: as soon as I wanted to get out of there using the Exit button on my remote, it first asked me, in a little pop-up window, if I want to login to all my servers now. Press OK, of course. It will connect to your Leete las normas aaaaaand....
...once in a TV channels list, the connection was fast!!! Let's just leave it at that. Pink/Total TV [Irdeto/N*D*S]: vroom, vrooooommmm!!! :TT TT: If not, change the channel and then it should connect! If not - reboot and check again...
===============================================
Here is how to install it from a file you get on a forum like this one:
FileZilla -> into AZbox HD -> Plugins -> OpenXCAS -> MultiCAS -> delete all "example" files, openxcas.conf and multicas emu_module.
Put in openxcas and emu_module files from a file one gets from a forum like this one.
Give emu_module CHMOD to 755.
Reboot.
The right version should be showing in AZbox HD MultiCAS menu. All servers should be preserved, if you put them in before!
Server details are in MultiCAS in /tmp file: ccc_serverstatus.info
Good luck!
It is possible to sort it all out via remote:
Home -> Plug-ins -> OpenXCAS -> Camd Setup -> MultiCAS -> Smartcard Interface -> SC Splitter and CS -> roll the options to Client CCcam or Client NewCamd and add as required...
The relevant config files to discuss:
cardreader.cfg
Sorry, I do not yet have a smartcard, so can't help too much...
newcamd.cfg
priocaid.cfg
===============================================
One way of editing it all is using telesat's MultiCAS Edit.
================================================
Here is the "how to" for 2 more options, from how to install it to how to edit it - easily:
0) Home -> Plug-ins -> OpenXCAS -> no more Manual Install option, guys! It is now DOWNLOAD EXECUTABLE -> you will see the links of support servers to get your plug-ins there, guys... [ get it from [url]http://azboxworld.com[/URL] ]
1) Download and install: MultiCAS 160... well, the latest - always!
2) Get the configuration files for camd/CS SW from DOWNLOAD CONFIG. So, one must download MultiCAS CCcam config files. But not needed for this one, if you had the previous version of MultiCAS already installed and it was all functioning.
At this point it is good to reboot your AZbox HD!
3) So, off we go to Home -> Plug-ins -> [as described above...] -> MultiCAS -> using your remote control -> Smart Card Splitter and CS.
4) Change the following, using your REMOTE:
-change the Mode to Client CCcam [if, like me, you have no smartcard to play with and share] - you can connect to other people's servers
-choose Server No. 1 [when done with the first one, move this one to 2, then 3 etc. - as many as you need, up to 16, I think...]
-choose Host Name Use - write something like: something.dyndns.org [whatever the data you get from your server/peer is, like gorski.dyndns.org or whatever your server is called like - I DO NOT HAVE A SERVER, THIS IS ONLY AN EXAMPLE!!!],
-choose the Port - 12000 or whatever it is that your peer tells you to use
-User Name - whatever it is [you must have a username that normally your peer gives you and put in his server to allow you access to his server]
-Password - whatever it is [like above]
-Server - Enable
-Connect - test it [but only AFTER I enabled the one which appears below it, on the TV screen...]
It should say "login success"...
Repeat for all the servers you have, to check...
Red Button = Save.
5) But still: as soon as I wanted to get out of there using the Exit button on my remote, it first asked me, in a little pop-up window, if I want to login to all my servers now. Press OK, of course. It will connect to your Leete las normas aaaaaand....
...once in a TV channels list, the connection was fast!!! Let's just leave it at that. Pink/Total TV [Irdeto/N*D*S]: vroom, vrooooommmm!!! :TT TT: If not, change the channel and then it should connect! If not - reboot and check again...
===============================================
Here is how to install it from a file you get on a forum like this one:
FileZilla -> into AZbox HD -> Plugins -> OpenXCAS -> MultiCAS -> delete all "example" files, openxcas.conf and multicas emu_module.
Put in openxcas and emu_module files from a file one gets from a forum like this one.
Give emu_module CHMOD to 755.
Reboot.
The right version should be showing in AZbox HD MultiCAS menu. All servers should be preserved, if you put them in before!
Server details are in MultiCAS in /tmp file: ccc_serverstatus.info
Good luck!
- 10 Abr 2009
- 1.334
- 9
- 0
Btw, I suppose that if we disable the MultiCAS card reader [using the cardreader.cfg file], we can activate NewCS alongside MultiCAS and use the 2 together.
So, if we activate NewCS 1.20 RC13 to use the internal card reader and we are servers to our Leete las normas, using Newcamd protocol, then we can have a full Newcamd package in NewCS + MultiCAS' Client NewCamd mode?
Would it be good enough for whatever it is we need...???
So, if we activate NewCS 1.20 RC13 to use the internal card reader and we are servers to our Leete las normas, using Newcamd protocol, then we can have a full Newcamd package in NewCS + MultiCAS' Client NewCamd mode?
Would it be good enough for whatever it is we need...???
- 29 Jun 2009
- 539
- 0
- 0
He conseguido enlazar las tres cosas y se aprecia una ligera mejoria aunque la verdad a mi me v a muy bien cccam + newcs.
Se me ocurre que se puede conseguir más o menos rapidez de otras formas: poner los mejores Leete las normas al principio del cccam.cfg y con 002 y al resto de los Leete las normas ponerles 001...todo ello de cara a no recargar al deco con excesivas cards....
Saludetes.
Se me ocurre que se puede conseguir más o menos rapidez de otras formas: poner los mejores Leete las normas al principio del cccam.cfg y con 002 y al resto de los Leete las normas ponerles 001...todo ello de cara a no recargar al deco con excesivas cards....
Saludetes.
- 20 Sep 2009
- 130
- 5
- 0
Febrero dijo:
También con multicas+newcs+cccam puedes grabar, cosa que con newcs+cccam solamente no puedes hacer. Yo es con el tema que estoy ahora, el de las grabaciones y creo que lo tengo conseguido, hay un hilo al respecto en la sección de multimedia.
Un saludo
esperemos que lo próximo sea que multicas pueda hacer cccam cliente y server. Tambien de paso poder añadir mas lÃÂÂneas c que no creo que sea dificil aumentar el numero.
Hola,
Una duda, com Multicas + Newcs puedo mirar canales de mi tarjeta local?
Ay configurado em Multicas el newcamd.cfg com mi user de Newcs, pero nada.....
Como acer?
Gracias
Una duda, com Multicas + Newcs puedo mirar canales de mi tarjeta local?
Ay configurado em Multicas el newcamd.cfg com mi user de Newcs, pero nada.....
Como acer?
Gracias
Yo he tenido q volver a activarlo, el newcs me sacaba la tarjeta viaccess XX para compartirla pero no podia yo visualizar mi abono. Ha sido activarlo todo perfecto. Este deco poco a poco me está gustando mas y mas y eso que me ha costado heeee. Saludos y gracias.
Lo que tengo es:
cardreader.cfg
Disable_CardReader = 1
newcamd.cfg
N: 127.0.0.1 24000 dumy dumy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
cardreader.cfg
Disable_CardReader = 1
newcamd.cfg
N: 127.0.0.1 24000 dumy dumy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
No me funciona....
Que ordem deveria de tener en las EMU´s?
Lo que tengo es:
MultiCAS
Newcs
Que ordem deveria de tener en las EMU´s?
Lo que tengo es:
MultiCAS
Newcs
Lo que quiero es tener Mbox solemente como servidor, conectado tambien a newcs....
Y para mirar tele com multicas + newcs
Y para mirar tele com multicas + newcs