- 9 Abr 2009
- 9.814
- 3.435
- 0
Formuler F3 no detecta usb tdt mygica
- Iniciador del tema kemepongo
- Fecha de inicio
- 18 Sep 2012
- 333
- 39
- 0
- 18 Sep 2012
- 333
- 39
- 0
root@formuler3:~# dmesg /tmp/tdt.log
Initializing cgroup subsys cpuset
Linux version 4.0.1 ([email protected]) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Jun 1 04:34:59 CEST 2016
Fetching vars from bootloader... found 11 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 54 MB LINUX region at 9 MB (0x0368d000@0x00973000)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
Zone ranges:
Normal [mem 0x0000000000000000-0x000000002fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000fffffff]
node 0: [mem 0x0000000020000000-0x000000002fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
On node 0 totalpages: 131072
Normal zone: 1152 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 10 pages/cpu @81487000 s10512 r8192 d22256 u40960
pcpu-alloc: s10512 r8192 d22256 u40960 alloc=10*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 312888K/524288K available (7440K kernel code, 367K rwdata, 1436K rodata, 272K init, 137K bss, 211400K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 751 MHz (375.761 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys memory
SMP: Booting CPU1...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
FPU revision is: 00130001
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 [email protected]).
fuse init (API version 7.23)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
ahci ahci.0: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf stag clo slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
brcmstb_nand: NAND controller driver is loaded
libphy: Fixed MDIO Bus: probed
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
bcmgenet bcmgenet.0: failed to get enet-eee clock
libphy: bcmgenet MII bus: probed
bcmgenet bcmgenet.0: configuring instance for internal PHY
attached PHY at address 1
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
ata1: SATA link down (SStatus 0 SControl 300)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
Driver 'mmcblk' needs updating - please use bus_type methods
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found
sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000500000-0x000010000000 : "complete"
0x000000500000-0x000000b00000 : "kernel"
0x000000b00000-0x000010000000 : "rootfs"
ubi0: default fastmap pool size: 95
ubi0: default fastmap WL pool size: 25
ubi0: attaching mtd2
ata2: SATA link down (SStatus 0 SControl 300)
ubi0: attached by fastmap
ubi0: fastmap pool size: 95
ubi0: fastmap WL pool size: 25
ubi0: attached mtd2 (name "rootfs", size 245 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1323202830
ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36
ubi0: background thread "ubi_bgt0d" started, PID 64
ALSA device list:
No soundcards found.
UBIFS: background thread "ubifs_bgt0_0" started, PID 65
usb 2-1: new full-speed USB device number 2 using ohci-brcm
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBIFS: recovery needed
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 241635328 bytes (230 MiB, 1903 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C7705648-FBFE-4F76-9D55-536BD0E167C0, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 272K (8090c000 - 80950000)
random: nonblocking pool is initialized
usb 1-2.1: new high-speed USB device number 4 using ehci-brcm
input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:048D:9006.0001/input/input0
hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-ehci_hcd-2.1/input1
usbcore: registered new interface driver tpm
formuler3: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
input: dreambox remote control (native) as /devices/virtual/input/input1
input: dreambox advanced remote control (native) as /devices/virtual/input/input2
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input3
SGI XFS with security attributes, realtime, no debug enabled
boxmodel: module license 'proprietary' taints kernel.
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: Link is Down
bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control off
NET: Registered protocol family 10
sh (543): drop_caches: 3
sh (560): drop_caches: 3
root@formuler3:~#
Initializing cgroup subsys cpuset
Linux version 4.0.1 ([email protected]) (gcc version 5.3.0 (GCC) ) #1 SMP Wed Jun 1 04:34:59 CEST 2016
Fetching vars from bootloader... found 11 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 512 MB + 0 MB RAM (from CFE)
CPU0 revision is: 0002a065 (Broadcom BMIPS4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 10000000 @ 20000000 (usable)
bmem: adding 54 MB LINUX region at 9 MB (0x0368d000@0x00973000)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
Zone ranges:
Normal [mem 0x0000000000000000-0x000000002fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000000fffffff]
node 0: [mem 0x0000000020000000-0x000000002fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
On node 0 totalpages: 131072
Normal zone: 1152 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 131072 pages, LIFO batch:31
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
PERCPU: Embedded 10 pages/cpu @81487000 s10512 r8192 d22256 u40960
pcpu-alloc: s10512 r8192 d22256 u40960 alloc=10*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
Kernel command line: ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M console=ttyS0,115200n8
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 312888K/524288K available (7440K kernel code, 367K rwdata, 1436K rodata, 272K init, 137K bss, 211400K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 751 MHz (375.761 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 749.56 BogoMIPS (lpj=374784)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys memory
SMP: Booting CPU1...
Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
CPU1 revision is: 0002a065 (Broadcom BMIPS4380)
FPU revision is: 00130001
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switched to clocksource wktmr
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 [email protected]).
fuse init (API version 7.23)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
serial8250.0: ttyS0 at MMIO 0x10406800 (irq = 62, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10406840 (irq = 63, base_baud = 5062500) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406880 (irq = 64, base_baud = 5062500) is a 16550A
loop: module loaded
ahci ahci.0: SSS flag set, parallel bus scan disabled
ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
ahci ahci.0: flags: ncq sntf stag clo slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 87
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 87
brcmstb_nand: NAND controller driver is loaded
libphy: Fixed MDIO Bus: probed
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
bcmgenet bcmgenet.0: GENET 2.0 EPHY: 0x00b0
bcmgenet bcmgenet.0: failed to get enet-eee clock
libphy: bcmgenet MII bus: probed
bcmgenet bcmgenet.0: configuring instance for internal PHY
attached PHY at address 1
__clk_disable: enet [0]
bcm7552_pm_genet_disable 00
__clk_disable: network [0]
usbcore: registered new interface driver zd1201
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
__clk_enable: usb [1]
bcm7552_pm_usb_enable 00
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 2
ohci-brcm ohci-brcm.0: irq 67, io mem 0x10480400
ata1: SATA link down (SStatus 0 SControl 300)
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
usbcore: registered new interface driver btusb
Driver 'mmcblk' needs updating - please use bus_type methods
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
sdhci-brcmstb sdhci-brcmstb.0: No vmmc regulator found
sdhci-brcmstb sdhci-brcmstb.0: No vqmmc regulator found
mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using ADMA
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
Key type dns_resolver registered
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
nand: AMD/Spansion S34ML02G1
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
Creating 3 MTD partitions on "brcmnand.0":
0x000000500000-0x000010000000 : "complete"
0x000000500000-0x000000b00000 : "kernel"
0x000000b00000-0x000010000000 : "rootfs"
ubi0: default fastmap pool size: 95
ubi0: default fastmap WL pool size: 25
ubi0: attaching mtd2
ata2: SATA link down (SStatus 0 SControl 300)
ubi0: attached by fastmap
ubi0: fastmap pool size: 95
ubi0: fastmap WL pool size: 25
ubi0: attached mtd2 (name "rootfs", size 245 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1956, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1323202830
ubi0: available PEBs: 0, total reserved PEBs: 1956, PEBs reserved for bad PEB handling: 36
ubi0: background thread "ubi_bgt0d" started, PID 64
ALSA device list:
No soundcards found.
UBIFS: background thread "ubifs_bgt0_0" started, PID 65
usb 2-1: new full-speed USB device number 2 using ohci-brcm
usb 1-2: new high-speed USB device number 3 using ehci-brcm
UBIFS: recovery needed
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 241635328 bytes (230 MiB, 1903 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS: reserved for root: 0 bytes (0 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID C7705648-FBFE-4F76-9D55-536BD0E167C0, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 272K (8090c000 - 80950000)
random: nonblocking pool is initialized
usb 1-2.1: new high-speed USB device number 4 using ehci-brcm
input: ITE Technologies, Inc. USB Deivce as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.1/1-2.1:1.1/0003:048D:9006.0001/input/input0
hid-generic 0003:048D:9006.0001: input,hidraw0: USB HID v1.01 Keyboard [ITE Technologies, Inc. USB Deivce] on usb-ehci_hcd-2.1/input1
usbcore: registered new interface driver tpm
formuler3: module_layout: kernel tainted.
Disabling lock debugging due to kernel taint
input: dreambox remote control (native) as /devices/virtual/input/input1
input: dreambox advanced remote control (native) as /devices/virtual/input/input2
DVB: registering new adapter (dvb0)
platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
input: front panel as /devices/virtual/input/input3
SGI XFS with security attributes, realtime, no debug enabled
boxmodel: module license 'proprietary' taints kernel.
__clk_enable: network [1]
__clk_enable: enet [1]
bcm7552_pm_genet_enable 00
bcmgenet bcmgenet.0 eth0: Link is Down
bcmgenet bcmgenet.0 eth0: Link is Up - 100Mbps/Full - flow control off
NET: Registered protocol family 10
sh (543): drop_caches: 3
sh (560): drop_caches: 3
root@formuler3:~#
- 9 Abr 2009
- 9.814
- 3.435
- 0
- 9 Abr 2009
- 9.814
- 3.435
- 0
- 30 Jul 2015
- 137
- 35
- 0
- 18 Sep 2012
- 333
- 39
- 0
aqui esta
root@formuler3:~# lsmod
Module Size Used by
ipv6 384623 48
boxmodel 868 0
xfs 695846 0
libcrc32c 714 1 xfs
formuler3 7018504 25
formuler3_3 33009 1 formuler3
formuler3_2 22287 0
formuler3_1 6541 3 formuler3_2,formuler3_3,formuler3
root@formuler3:~# lsusb
Bus 001 Device 003: ID 04b4:6570
Bus 002 Device 002: ID 04a3:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 048d:9006
root@formuler3:~#
root@formuler3:~# lsmod
Module Size Used by
ipv6 384623 48
boxmodel 868 0
xfs 695846 0
libcrc32c 714 1 xfs
formuler3 7018504 25
formuler3_3 33009 1 formuler3
formuler3_2 22287 0
formuler3_1 6541 3 formuler3_2,formuler3_3,formuler3
root@formuler3:~# lsusb
Bus 001 Device 003: ID 04b4:6570
Bus 002 Device 002: ID 04a3:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 048d:9006
root@formuler3:~#
- 18 Sep 2012
- 333
- 39
- 0
aqui esta,esto pone
root@formuler3:~# lsmod
Module Size Used by
ipv6 384623 48
af9033 27116 0
dvb_usb_af9035 17968 0
dvb_usb_v2 14943 1 dvb_usb_af9035
boxmodel 868 0
xfs 695846 0
libcrc32c 714 1 xfs
formuler3 7018504 26
formuler3_3 33009 1 formuler3
formuler3_2 22287 0
formuler3_1 6541 3 formuler3_2,formuler3_3,formuler3
root@formuler3:~# lsusb
Bus 001 Device 003: ID 04b4:6570
Bus 002 Device 002: ID 04a3:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 048d:9006
root@formuler3:~# lsmod
Module Size Used by
ipv6 384623 48
af9033 27116 0
dvb_usb_af9035 17968 0
dvb_usb_v2 14943 1 dvb_usb_af9035
boxmodel 868 0
xfs 695846 0
libcrc32c 714 1 xfs
formuler3 7018504 26
formuler3_3 33009 1 formuler3
formuler3_2 22287 0
formuler3_1 6541 3 formuler3_2,formuler3_3,formuler3
root@formuler3:~# lsusb
Bus 001 Device 003: ID 04b4:6570
Bus 002 Device 002: ID 04a3:0101
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 048d:9006
- 18 Sep 2012
- 333
- 39
- 0
Tampoco funciona con este,la verdad esque le instalado todos los que hay,no funciona con ninguno,ni el t119 ni el t202,ya no sé que hacer más,y los tdt si funcionan en el pc,yo creo que el deco no funca.
Enviado desde mi D6603 mediante Tapatalk
Enviado desde mi D6603 mediante Tapatalk
Hay que mirar si ese ID está metido en el kernel, porque ya te dije que te has comprado dispositivos raros sin saber si estaban probados en OpenSPA. Nosotros tenemos un Formuler F3 funcionando perfectamente con un Play TV.
Mi pregunta es : después de instalar los drivers, haces lo que te dije más atrás? Instala los drivers y mira que no te dé ningún error y luego reinicia Sistema.
Mi pregunta es : después de instalar los drivers, haces lo que te dije más atrás? Instala los drivers y mira que no te dé ningún error y luego reinicia Sistema.
- 26 Ago 2009
- 8.533
- 2.648
- 0
A ver prueba instalando por telnet todo esto.
Reinicia el deco entero a ver si ahora te lo pilla.
Código:
opkg install kernel-module-it913x
opkg install kernel-module-af9033
opkg install kernel-module-dvb-usb-af9035
opkg install firmware-dvb-usb-it913x
opkg install firmware-dvb-usb-it9135-01
opkg install firmware-dvb-usb-it9135-02
opkg install firmware-dvb-usb-af9035-02
opkg install firmware-dvb-usb-af9035-01Reinicia el deco entero a ver si ahora te lo pilla.
- 18 Sep 2012
- 333
- 39
- 0
pues porfinnnnnnnnnnnnnnnnnnnn,ya funciona el mygica T119 instalando estos driver por telnet,de lujo.
solo puedo decir 1 millon de gracias,eres el dios de openspa,jajaja,
Pues tambien ahora he probado el august dvd T-202 y ya funciona tambien.van de lujo.
Jajajaja ahora tengo 2 tdt ,1 millon de gracias,espero que este post le sirvan a los demas tambien.Ya podemos apuntar 2 tdt mas a esta pedazo de imagen.