- 7 Abr 2018
- 3.487
- 6.098
- 0
En los primeros posts de este hilo, puedes ver como se usa con algunas cosillas.
Convierte tu vieja o nueva pc en un NAS SYNOLOGY
- Iniciador del tema elduque
- Fecha de inicio
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.2.0
1- Updated r8168 driver to v8.055.00.
2- Remove excessive "Can't get sata chip name" logs in some environments (trivial addon).
3- Reduce the probability of boot disk damage caused by frequent RRM operations.
4- Fixed some minor issues in wireless addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.0
1- Updated r8168 driver to v8.055.00.
2- Remove excessive "Can't get sata chip name" logs in some environments (trivial addon).
3- Reduce the probability of boot disk damage caused by frequent RRM operations.
4- Fixed some minor issues in wireless addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.0
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.2.1
1- Add support for AIC8800 series wireless network card.
2- Fix wireless addon can't work when OVS is enabled.
3- Update i915(I915MT65-24.1.19-6) for SA6400.
4- Remove log "nvme_dev_port_check.c:29 Failed to get slot informtion of nvme*".
5- Update misc tools.
6- Add RFKILL support.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.1
1- Add support for AIC8800 series wireless network card.
2- Fix wireless addon can't work when OVS is enabled.
3- Update i915(I915MT65-24.1.19-6) for SA6400.
4- Remove log "nvme_dev_port_check.c:29 Failed to get slot informtion of nvme*".
5- Update misc tools.
6- Add RFKILL support.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.1
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.2.2
1- Fix the main menu lock problem after "Save modifications of '/opt/rr'".
2- Fix the syntax error of trivial addon.
3- Fix the missing SOCKETS driver of open-vm-tools spk.
4- Add vmtools addon, which includes qemu-ga & open-vm-tools.
5- 4.1. The addon will automatically judge the environment and enable the corresponding function, you don't need to delete the addon manually in physical machines.
6- 4.2. New users will be selected by default, upgrade users please add the addon manually.
7- 4.3. If you enable this addon, please don't install the spk in DSM.
8- 5.1. Fix the IP display and refresh problem of wireless network in RR.
9- 5.2. Fix the problem that the network does not drive in DSM after setting SSID&PSK in RR.
10- 5.3. Synchronize the SSID&PSK of RR to DSM.
11- 5.4. Fix the support of wireless network in junior mode, supported wireless network installation of DSM system. (Now not support intel wireless network card)
12- 5.5. The wpa_supplicant.conf file is located in the root directory of the first partition of the bootloader disk, you can manually place the file in the bootloader disk for pure wireless environment.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.2
1- Fix the main menu lock problem after "Save modifications of '/opt/rr'".
2- Fix the syntax error of trivial addon.
3- Fix the missing SOCKETS driver of open-vm-tools spk.
4- Add vmtools addon, which includes qemu-ga & open-vm-tools.
5- 4.1. The addon will automatically judge the environment and enable the corresponding function, you don't need to delete the addon manually in physical machines.
6- 4.2. New users will be selected by default, upgrade users please add the addon manually.
7- 4.3. If you enable this addon, please don't install the spk in DSM.
8- 5.1. Fix the IP display and refresh problem of wireless network in RR.
9- 5.2. Fix the problem that the network does not drive in DSM after setting SSID&PSK in RR.
10- 5.3. Synchronize the SSID&PSK of RR to DSM.
11- 5.4. Fix the support of wireless network in junior mode, supported wireless network installation of DSM system. (Now not support intel wireless network card)
12- 5.5. The wpa_supplicant.conf file is located in the root directory of the first partition of the bootloader disk, you can manually place the file in the bootloader disk for pure wireless environment.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.2
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.2.3
1- Add 'Configure loader (verbose)' mode, if grub stage cannot enter RR normally, please check the log information through this mode.
2- Fix the problem that some motherboards do not support the parameter --is-supported of fwsetup, which leads to direct entry into UEFI.
3- Fix the kernel panic caused by the watchdog of some motherboards, and the endless loop of installation questions.
4- Optimize the processing method of wireless SSID and PSK to be compatible with illegal characters. And only synchronize RR settings when installing the addon for the first time.
5- Fix syntax errors in vmtools addon.
6- Fix mountloader addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.3
1- Add 'Configure loader (verbose)' mode, if grub stage cannot enter RR normally, please check the log information through this mode.
2- Fix the problem that some motherboards do not support the parameter --is-supported of fwsetup, which leads to direct entry into UEFI.
3- Fix the kernel panic caused by the watchdog of some motherboards, and the endless loop of installation questions.
4- Optimize the processing method of wireless SSID and PSK to be compatible with illegal characters. And only synchronize RR settings when installing the addon for the first time.
5- Fix syntax errors in vmtools addon.
6- Fix mountloader addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.3
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.2.4
1- Fixed the problem that some environments may report the error "grub-editenv: error: environment block too small.".
2- Optimize the logic of reconfiguration during update bootloader.
3- Remove unsupported versions (v64561).
4- Add the function of updating microcode. (Settings menu -> Update microcode)
5- Add the function of blocking DSM automatic update. (Advanced settings -> DSM automatic update)
6- Fix the support of sftp for DSM7.1 in the setrootpw addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.4
1- Fixed the problem that some environments may report the error "grub-editenv: error: environment block too small.".
2- Optimize the logic of reconfiguration during update bootloader.
3- Remove unsupported versions (v64561).
4- Add the function of updating microcode. (Settings menu -> Update microcode)
5- Add the function of blocking DSM automatic update. (Advanced settings -> DSM automatic update)
6- Fix the support of sftp for DSM7.1 in the setrootpw addon.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.2.4
- 7 Abr 2018
- 3.487
- 6.098
- 0
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.3.0
1- Optimize all addons.
1.1. Fix syntax errors in codecpatch, maiyunda, rebootloader, sortnetif (only affects very few environments).
1.2. Fix RRM unavailability caused by syntax errors in mountloader (from v25.2.4)
1.3. Fix console, disks, dbgutils, i915le10th, powersched, maiyunda, mountloader support for DSM 7.0/7.1.
1.4. Fix compatibility of dbgutils, mountloader, rebootloader, synoconfbkp for boot disk partition operations.
1.5. Fix nvmesystem support for DSM 7.0/7.1, DT all models 42218 and above are supported.
1.6. Update hdddb to v3.6.111, Thanks @007revad
2- Update r8125 and r8126 driver version to 9.015.00 and 10.015.00
3- Added SA6400 custom kernel to enable FANOTIFY support.
4- Fixed the problem of compiling failed and reporting garbled characters when updating RR to v24.2.4 without network.
Warning:
Due to the newly added configuration items, it is not compatible direct upgrade with versions below v25.2.4.
Upgrade countermeasure 1: Execute touch /mnt/p1/.upgraded in RR shell (# Execute before upgrading or before compiling after upgrading) and then compile and boot.
Upgrade countermeasure 2: Upgrade twice this version in a row and then compile and boot.
Upgrade countermeasure 3: After upgrading, perform an "Try to recovery a installed DSM system" operation and then compile and boot.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.0
1- Optimize all addons.
1.1. Fix syntax errors in codecpatch, maiyunda, rebootloader, sortnetif (only affects very few environments).
1.2. Fix RRM unavailability caused by syntax errors in mountloader (from v25.2.4)
1.3. Fix console, disks, dbgutils, i915le10th, powersched, maiyunda, mountloader support for DSM 7.0/7.1.
1.4. Fix compatibility of dbgutils, mountloader, rebootloader, synoconfbkp for boot disk partition operations.
1.5. Fix nvmesystem support for DSM 7.0/7.1, DT all models 42218 and above are supported.
1.6. Update hdddb to v3.6.111, Thanks @007revad
2- Update r8125 and r8126 driver version to 9.015.00 and 10.015.00
3- Added SA6400 custom kernel to enable FANOTIFY support.
4- Fixed the problem of compiling failed and reporting garbled characters when updating RR to v24.2.4 without network.
Warning:
Due to the newly added configuration items, it is not compatible direct upgrade with versions below v25.2.4.
Upgrade countermeasure 1: Execute touch /mnt/p1/.upgraded in RR shell (# Execute before upgrading or before compiling after upgrading) and then compile and boot.
Upgrade countermeasure 2: Upgrade twice this version in a row and then compile and boot.
Upgrade countermeasure 3: After upgrading, perform an "Try to recovery a installed DSM system" operation and then compile and boot.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.0
Última edición:
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.3.1
1- Optimize all addons.
1.1. Fix syntax errors in codecpatch, maiyunda, rebootloader, sortnetif (only affects very few environments).
1.2. Fix RRM unavailability caused by syntax errors in mountloader (from v25.2.4)
1.3. Fix console, disks, dbgutils, i915le10th, powersched, maiyunda, mountloader support for DSM 7.0/7.1.
1.4. Fix compatibility of dbgutils, mountloader, rebootloader, synoconfbkp for boot disk partition operations.
1.5. Fix nvmesystem support for DSM 7.0/7.1, DT all models 42218 and above are supported.
1.6. Update hdddb to v3.6.111, Thanks @007revad
2- Update r8125 and r8126 driver version to 9.015.00 and 10.015.00
3- Added SA6400 custom kernel to enable FANOTIFY support.
4- Fixed the problem of compiling failed and reporting garbled characters when updating RR to v24.2.4 without network.
Warning:
Due to the newly added configuration items, it is not compatible direct upgrade with versions below v25.2.4.
Upgrade countermeasure 1: Execute touch /mnt/p1/.upgraded in RR shell (# Execute before upgrading or before compiling after upgrading) and then compile and boot.
Upgrade countermeasure 2: Upgrade twice this version in a row and then compile and boot.
Upgrade countermeasure 3: After upgrading, perform an "Try to recovery a installed DSM system" operation and then compile and boot.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.1
1- Optimize all addons.
1.1. Fix syntax errors in codecpatch, maiyunda, rebootloader, sortnetif (only affects very few environments).
1.2. Fix RRM unavailability caused by syntax errors in mountloader (from v25.2.4)
1.3. Fix console, disks, dbgutils, i915le10th, powersched, maiyunda, mountloader support for DSM 7.0/7.1.
1.4. Fix compatibility of dbgutils, mountloader, rebootloader, synoconfbkp for boot disk partition operations.
1.5. Fix nvmesystem support for DSM 7.0/7.1, DT all models 42218 and above are supported.
1.6. Update hdddb to v3.6.111, Thanks @007revad
2- Update r8125 and r8126 driver version to 9.015.00 and 10.015.00
3- Added SA6400 custom kernel to enable FANOTIFY support.
4- Fixed the problem of compiling failed and reporting garbled characters when updating RR to v24.2.4 without network.
Warning:
Due to the newly added configuration items, it is not compatible direct upgrade with versions below v25.2.4.
Upgrade countermeasure 1: Execute touch /mnt/p1/.upgraded in RR shell (# Execute before upgrading or before compiling after upgrading) and then compile and boot.
Upgrade countermeasure 2: Upgrade twice this version in a row and then compile and boot.
Upgrade countermeasure 3: After upgrading, perform an "Try to recovery a installed DSM system" operation and then compile and boot.
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.1
- 7 Abr 2018
- 3.487
- 6.098
- 0
Algo que me volvió un poco loco al montar el contenedor emby, fue el "PUID" y el "PGID". Lo normal es que los ficheros docker-compose.yml vengan de este modo PUID=1000 y PGID=1000. Este valor no corresponde en todas las maquinas, con lo cual no funcionara el contenedor. Para averiguar cuales son esos datos en nuestra maquina, entraremos por ssh y le enviamos el comando id
Adaptaremos el fichero docker-compose.yml con nuestros datos antes de ejecutar el contenedor.
services:
emby:
image: lscr.io/linuxserver/emby:latest
container_name: emby
restart: unless-stopped
ports:
- "8096:8096"
environment:
- PUID=1000
- PGID=1000
- TZ=Europe/Madrid
volumes:
- ./config:/config
- ./peliculas:/peliculas
- ./series:/series
- ./musica:/musica
- ./podcasts:/podcasts
- ./fotos:/fotos
- ./tv:/tv
Quedaría asi:
services:
emby:
image: lscr.io/linuxserver/emby:latest
container_name: emby
restart: unless-stopped
ports:
- "8096:8096"
environment:
- PUID=1026
- PGID=101
- TZ=Europe/Madrid
volumes:
- ./config:/config
- ./peliculas:/peliculas
- ./series:/series
- ./musica:/musica
- ./podcasts:/podcasts
- ./fotos:/fotos
- ./tv:/tv
Adaptaremos el fichero docker-compose.yml con nuestros datos antes de ejecutar el contenedor.
services:
emby:
image: lscr.io/linuxserver/emby:latest
container_name: emby
restart: unless-stopped
ports:
- "8096:8096"
environment:
- PUID=1000
- PGID=1000
- TZ=Europe/Madrid
volumes:
- ./config:/config
- ./peliculas:/peliculas
- ./series:/series
- ./musica:/musica
- ./podcasts:/podcasts
- ./fotos:/fotos
- ./tv:/tv
Quedaría asi:
services:
emby:
image: lscr.io/linuxserver/emby:latest
container_name: emby
restart: unless-stopped
ports:
- "8096:8096"
environment:
- PUID=1026
- PGID=101
- TZ=Europe/Madrid
volumes:
- ./config:/config
- ./peliculas:/peliculas
- ./series:/series
- ./musica:/musica
- ./podcasts:/podcasts
- ./fotos:/fotos
- ./tv:/tv
Última edición:
- 7 Abr 2018
- 3.487
- 6.098
- 0
En el container manager, desconozco si al actualizar se te iría al garete. Si te puedo decir que ayer actualice el contenedor emby y sin problemas. Por otra parte si te funciona bien con los contenedores que estés usando, no te arriesgues.
- 7 Abr 2018
- 3.487
- 6.098
- 0
Nuevo arranque RR 25.3.2
1- Optimize menu logic and fix possible cross assignment issues.
2- Fix sortnetif addon, fix the issue of losing contact after opening the sortnetif addon (from 25.3.1).
3- Fix dbgutils, Reboottoloader, Synoconfbkp addons conflicts with certain third-party applications, resulting in unavailability issues.
4- Add Huawei HiNIC driver support (only epyc7002).
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.2
1- Optimize menu logic and fix possible cross assignment issues.
2- Fix sortnetif addon, fix the issue of losing contact after opening the sortnetif addon (from 25.3.1).
3- Fix dbgutils, Reboottoloader, Synoconfbkp addons conflicts with certain third-party applications, resulting in unavailability issues.
4- Add Huawei HiNIC driver support (only epyc7002).
Gracias a : https://github.com/RROrg/rr
P.D. Ficheros y video manual en la descarga
Descarga Versión RR 25.3.2
- 7 Abr 2018
- 3.487
- 6.098
- 0
Si queremos tener un dominio y subdominios alquilados en nuestra maquina Synology con nginx-proxy-manager, hay que saber que synology usa los puertos 80 y 443, necesarios para obtener certificados SSL.
Con lo cual no nos dejara usar nginx-proxy-manager, pues entrara en conflicto de puertos. Estaremos obligados a que Synology, deje esos puertos libres.
Si os interesa saber como hacerlo, decídmelo y os cuento.
Con lo cual no nos dejara usar nginx-proxy-manager, pues entrara en conflicto de puertos. Estaremos obligados a que Synology, deje esos puertos libres.
Si os interesa saber como hacerlo, decídmelo y os cuento.
- 2 Mar 2009
- 6.281
- 4.968
- 0
- 7 Abr 2018
- 3.487
- 6.098
- 0
Código:
sed -i -e 's/80/82/' -e 's/443/444/' /usr/syno/share/nginx/server.mustache /usr/syno/share/nginx/DSM.mustache /usr/syno/share/nginx/WWWService.mustache
synosystemctl restart nginx
Última edición: