- 27 Feb 2010
- 144
- 0
- 0
Pues nada, que llevo desde el lunes intentando hacer rular mi blanquita con sbox y como que no puedo, me lee la card pero no me manda una sola emm correcta. Tengo la version 0.4.7 y cccam 2.1.3 y esta es mi sbox.conf
[main]
server_only=1 # 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= /PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=CCCCC # newcamd port
mhz=318 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER
#Nagra2/3 Example
[CCCCC] # nagra2 camid (4 bytes)
rsa=CCCCCCCCCCCCCCCCCCCCCCCCCCCCC # rsa "n" from this card (like newcs)
boxkey=CCCCCCCCCCCC # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/keys/port.list # path from port.list
#Example configuration newcamd client
#[NewCamd]
#server0=azbox:[email protected]:18000/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:12000/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
Las C son mis datos privados.....
Cuando inicio sbox por telnet, hay veces que inicia bien y otras me dice
card init fail
he probado tambien con 210 mhz y nada, y en cccam si la veo, a ver si alguien me echa una mano, porque llevo ya unos ratos largos con el p... deko.
un saludo y gracias desde ya
[main]
server_only=1 # 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= /PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=CCCCC # newcamd port
mhz=318 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER
#Nagra2/3 Example
[CCCCC] # nagra2 camid (4 bytes)
rsa=CCCCCCCCCCCCCCCCCCCCCCCCCCCCC # rsa "n" from this card (like newcs)
boxkey=CCCCCCCCCCCC # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/keys/port.list # path from port.list
#Example configuration newcamd client
#[NewCamd]
#server0=azbox:[email protected]:18000/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:12000/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
Las C son mis datos privados.....
Cuando inicio sbox por telnet, hay veces que inicia bien y otras me dice
card init fail
he probado tambien con 210 mhz y nada, y en cccam si la veo, a ver si alguien me echa una mano, porque llevo ya unos ratos largos con el p... deko.
un saludo y gracias desde ya