Problema con newcs en AZBOX HD

[manolito1998]

Muy buenas a tod@s,

Tengo una local de nuestro proveedor por Astra, y todos los dias se me cuelga por lo menos 1 vez.

Me conecto con mbox 0.5 0018 y este es el log del newcs cuando se bloquea, por si a alguien se le ocurre algo:

[ 11:12:22 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:12:22 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:12:22 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:12:24 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:12:24 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:24 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:24 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:24 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:12:24 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:12:24 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:12:26 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:26 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:26 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:12:26 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:12:26 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:12:28 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:12:28 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:28 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:12:28 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:32 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:12:32 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:32 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:32 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:32 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:12:32 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:12:32 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:12:33 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:33 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:33 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:12:33 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:12:33 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:12:34 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:34 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:34 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:12:34 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:12:34 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:12:35 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:12:35 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:36 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:12:36 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:39 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:39 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:39 ] [ SID ] Checking for SID 7694 for Reader 0 (upper) - SO is: 0
[ 11:12:39 ] [ Newcamd:20010 ] Accepted SID 7694 on Reader 0 (upper) from diego
[ 11:12:39 ] [ Card queue /dev/scard ] ECM added, sid 7694, prio 0
[ 11:12:40 ] [ Card queue /dev/scard ] ECM sid 7505, prio 0 too old!
[ 11:12:40 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:40 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:40 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:40 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:12:40 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:12:40 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:12:43 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:12:43 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:43 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:43 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:43 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:12:43 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:12:43 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:12:45 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:12:45 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:45 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:45 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:45 ] [ SID ] Checking for SID 77C6 for Reader 0 (upper) - SO is: 0
[ 11:12:45 ] [ Newcamd:20010 ] Accepted SID 77C6 on Reader 0 (upper) from diego
[ 11:12:45 ] [ Card queue /dev/scard ] ECM added, sid 77C6, prio 0
[ 11:12:45 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:45 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:45 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:12:45 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:12:45 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:12:47 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:12:47 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:50 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:50 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:50 ] [ SID ] Checking for SID 7694 for Reader 0 (upper) - SO is: 0
[ 11:12:50 ] [ Newcamd:20010 ] Accepted SID 7694 on Reader 0 (upper) from diego
[ 11:12:50 ] [ Card queue /dev/scard ] ECM added, sid 7694, prio 0
[ 11:12:51 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:51 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:51 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:12:51 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:12:51 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:12:53 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:12:53 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:54 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:12:54 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:54 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:12:54 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:12:54 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:12:54 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:12:54 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:55 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:12:55 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:12:55 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:55 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:55 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:12:55 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:12:55 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:12:57 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:12:57 ] [ Newcamd:20010 ] ECM <- diego
[ 11:12:57 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:12:57 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:12:57 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:00 ] [ Card queue /dev/scard ] ECM sid 7694, prio 0 too old!
[ 11:13:00 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:01 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:01 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:02 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:02 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:02 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:02 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:02 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:03 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:03 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:03 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:13:03 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:13:03 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:04 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:13:04 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:05 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:05 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:05 ] [ SID ] Checking for SID 77C6 for Reader 0 (upper) - SO is: 0
[ 11:13:05 ] [ Newcamd:20010 ] Accepted SID 77C6 on Reader 0 (upper) from diego
[ 11:13:05 ] [ Card queue /dev/scard ] ECM added, sid 77C6, prio 0
[ 11:13:05 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:05 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:05 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:13:05 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:13:05 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:13:06 ] [ Card queue /dev/scard ] ECM sid 77C6, prio 0 too old!
[ 11:13:06 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:06 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:13:06 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:10 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:10 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:10 ] [ SID ] Checking for SID 7504 for Reader 0 (upper) - SO is: 0
[ 11:13:10 ] [ Newcamd:20010 ] Accepted SID 7504 on Reader 0 (upper) from diego
[ 11:13:10 ] [ Card queue /dev/scard ] ECM added, sid 7504, prio 0
[ 11:13:11 ] [ Card queue /dev/scard ] ECM sid 7694, prio 0 too old!
[ 11:13:11 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:11 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:11 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:11 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:11 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:11 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:12 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:12 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:13 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:13 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:13 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:13:13 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:13:13 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:15 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:13:15 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:15 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:15 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:15 ] [ SID ] Checking for SID 77C2 for Reader 0 (upper) - SO is: 0
[ 11:13:15 ] [ Newcamd:20010 ] Accepted SID 77C2 on Reader 0 (upper) from diego
[ 11:13:15 ] [ Card queue /dev/scard ] ECM added, sid 77C2, prio 0
[ 11:13:16 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:13:16 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:16 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:16 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:16 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:13:16 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:13:16 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:13:18 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:13:18 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:20 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:20 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:20 ] [ SID ] Checking for SID 77C6 for Reader 0 (upper) - SO is: 0
[ 11:13:20 ] [ Newcamd:20010 ] Accepted SID 77C6 on Reader 0 (upper) from diego
[ 11:13:20 ] [ Card queue /dev/scard ] ECM added, sid 77C6, prio 0
[ 11:13:21 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:21 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:21 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:21 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:21 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:23 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:23 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:24 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:13:24 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:25 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:25 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:25 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:13:25 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:13:25 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:26 ] [ Card queue /dev/scard ] ECM sid 77C6, prio 0 too old!
[ 11:13:26 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:26 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:13:26 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:30 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:30 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:30 ] [ SID ] Checking for SID 77C6 for Reader 0 (upper) - SO is: 0
[ 11:13:30 ] [ Newcamd:20010 ] Accepted SID 77C6 on Reader 0 (upper) from diego
[ 11:13:30 ] [ Card queue /dev/scard ] ECM added, sid 77C6, prio 0
[ 11:13:31 ] [ Card queue /dev/scard ] ECM sid 7504, prio 0 too old!
[ 11:13:31 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:32 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:32 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:34 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:13:34 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:35 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:35 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:35 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:35 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:35 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:36 ] [ Card queue /dev/scard ] ECM sid 77C2, prio 0 too old!
[ 11:13:36 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:37 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:13:37 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:37 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:37 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:37 ] [ SID ] Checking for SID 0000 for Reader 0 (upper) - SO is: 0
[ 11:13:37 ] [ Newcamd:20010 ] Accepted SID 0000 on Reader 0 (upper) from diego
[ 11:13:37 ] [ Card queue /dev/scard ] ECM added, sid 0, prio 0
[ 11:13:38 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:38 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:38 ] [ SID ] Checking for SID 76CC for Reader 0 (upper) - SO is: 0
[ 11:13:38 ] [ Newcamd:20010 ] Accepted SID 76CC on Reader 0 (upper) from diego
[ 11:13:38 ] [ Card queue /dev/scard ] ECM added, sid 76CC, prio 0
[ 11:13:39 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:39 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:39 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:13:39 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:13:39 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:39 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:39 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:39 ] [ SID ] Checking for SID 7503 for Reader 0 (upper) - SO is: 0
[ 11:13:39 ] [ Newcamd:20010 ] Accepted SID 7503 on Reader 0 (upper) from diego
[ 11:13:39 ] [ Card queue /dev/scard ] ECM added, sid 7503, prio 0
[ 11:13:40 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:40 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:40 ] [ SID ] Checking for SID 0000 for Reader 0 (upper) - SO is: 0
[ 11:13:40 ] [ Newcamd:20010 ] Accepted SID 0000 on Reader 0 (upper) from diego
[ 11:13:40 ] [ Card queue /dev/scard ] ECM added, sid 0, prio 0
[ 11:13:41 ] [ Card queue /dev/scard ] ECM sid 77C6, prio 0 too old!
[ 11:13:41 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:41 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:13:41 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:41 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:41 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:41 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:42 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:42 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:44 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:44 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:44 ] [ SID ] Checking for SID 76C0 for Reader 0 (upper) - SO is: 0
[ 11:13:44 ] [ Newcamd:20010 ] Accepted SID 76C0 on Reader 0 (upper) from diego
[ 11:13:44 ] [ Card queue /dev/scard ] ECM added, sid 76C0, prio 0
[ 11:13:46 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:13:46 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:51 ] [ Card queue /dev/scard ] ECM sid 77C6, prio 0 too old!
[ 11:13:51 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:54 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:13:54 ] [ Newcamd:20010 ] ECM <- diego
[ 11:13:54 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:13:54 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:13:54 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:13:56 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:13:56 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:58 ] [ Card queue /dev/scard ] ECM sid 0, prio 0 too old!
[ 11:13:58 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:13:59 ] [ Card queue /dev/scard ] ECM sid 76CC, prio 0 too old!
[ 11:13:59 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:00 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:14:00 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:00 ] [ Card queue /dev/scard ] ECM sid 7503, prio 0 too old!
[ 11:14:00 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:01 ] [ Card queue /dev/scard ] ECM sid 0, prio 0 too old!
[ 11:14:01 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:01 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:14:01 ] [ Newcamd:20010 ] ECM <- diego
[ 11:14:01 ] [ SID ] Checking for SID 0000 for Reader 0 (upper) - SO is: 0
[ 11:14:01 ] [ Newcamd:20010 ] Accepted SID 0000 on Reader 0 (upper) from diego
[ 11:14:01 ] [ Card queue /dev/scard ] ECM added, sid 0, prio 0
[ 11:14:02 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:14:02 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:03 ] [ Newcamd:20010 ] Command 80 from diego len 100
[ 11:14:03 ] [ Newcamd:20010 ] ECM <- diego
[ 11:14:03 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:14:03 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:14:03 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:14:05 ] [ Card queue /dev/scard ] ECM sid 76C0, prio 0 too old!
[ 11:14:05 ] [ Newcamd ] ECM -> diego (NOT OK)
[ 11:14:10 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:14:10 ] [ Newcamd:20010 ] ECM <- diego
[ 11:14:10 ] [ SID ] Checking for SID 0000 for Reader 0 (upper) - SO is: 0
[ 11:14:10 ] [ Newcamd:20010 ] Accepted SID 0000 on Reader 0 (upper) from diego
[ 11:14:10 ] [ Card queue /dev/scard ] ECM added, sid 0, prio 0

[ 11:14:14 ] [ Newcamd:20010 ] Command 81 from diego len 100
[ 11:14:14 ] [ Newcamd:20010 ] ECM <- diego
[ 11:14:14 ] [ SID ] Checking for SID 7790 for Reader 0 (upper) - SO is: 0
[ 11:14:14 ] [ Newcamd:20010 ] Accepted SID 7790 on Reader 0 (upper) from diego
[ 11:14:14 ] [ Card queue /dev/scard ] ECM added, sid 7790, prio 0
[ 11:14:15 ] [ Card queue /dev/scard ] ECM sid 7790, prio 0 too old!
[ 11:14:15 ] [ Newcamd ] ECM -> diego (NOT OK)

el archivo de configuracion de newcs.xml es este:

<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<node>/dev/scard</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20010</newcamd_port>
<autosid>no</autosid>
<priority>fifo</priority>
<mhz>368</mhz>

</device>
</readers>
<xmlserver>
<enabled>0</enabled>
</xmlserver>
<radegastserver>
<enabled>0</enabled>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<darint39>sintoi51</darint39>
<level>internal</level>    
<type>all</type>
<output>console,tcp</output>
<logfile>/tmp/newcs.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>172.16.1.1</udp_host>
<udp_port>9000</udp_port>
<udp_options></udp_options>
<tcp_port>1001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>local</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>diego</name>
<password>0000ff</password>
<au>on</au>
</user>
</newcamd_server>
</newCSconfig>

Sabeis si estoy haciendo algo mal??

Muchas gracias a tod@s

 

[tinos]

Pues estoy casi convencido que es un problema del mbox porque no esta del todo fino... pero puedes probar esto a ver si ayuda. Conozco casos de camd que tiran el newcs.

la cola fifo no tendria función ya que igualmente sólo tienes 1 usuario pero por si acaso.
los mhz por si es mas estable (en teoria el valor correcto es el que te pongo yo).
y quitar los au ya que igualmente el mbox no soporta actualizar la tarjeta, tendras que conectar con el mgcamd para eso si es que funciona. o crea otro usuario mbox para esa camd y deja el primero para mgcamd y actualizaciones.

<priority>round</priority>
<mhz>358</mhz>

<au>off</au>

 

[manolito1998]

Estoy probando las modificaciones a ver que pasa.

Muchas gracias por tu interes, de verdad!!!!

Un saludo

 

[manolito1998]

Nada, sigo igual.

Esperando a ver si sale una version nueva para azbox :D

Muchas gracias por la ayuda.

Un saludo

 

[tinos]

Lo siento, bueno pues casi seguro que es un problema de la camd que satura la card con peticiones incorrectas... si quieres he colocado un post en la sección English, ahi tienes info de como colocar el autosid en no con una lista de los correctos, de esa manera puedes evitar que te tumben la tarjeta... igual es eso. La otra opción puede ser que el fallo de multiecms que tiene actualmente realmente vuelva loca la card.

Puedes probar a añadir los allow y deny en sids... igual alguien los tiene para tu tarjeta.

 

[stickbird]

Yo estoy igual.
A veces se conecta, a veces no, se cuelga, etc...
No sé que hacer, he echo unos cambios que me propuso papay a ver que tal.

autosid->off
ecm->10

La versión 1.67 la habeis probado?
Si alguien tiene solución a newcs para azbox que no tarde en decirlo XDDD
Y sbox? va mejor?

Salu2!

 

[Yersi]

A mi Sbox se me desconecta mas que el newcs, de echo el newcs con mbox 04 023 me funciona bien.

Este es mi mewcs.xml por si fuese por eso:

<?xml version="1.0"?>

<newCSconfig>
<readers name="Card Readers">
<device>
<name>upper</name>
<type>azbox</type>
<mhz>358</mhz>
<node>/dev/scard</node>
<parity>odd</parity>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey></boxkey>
<rsa></rsa>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>15001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>NO</enabled>
<port>44000</port>
<allow>
<hostname>all</hostname>
</allow>
</radegastserver>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cliente</name>
<password>cliente1</password>
<port>15001</port>
<au>on</au>
<spider>No</spider>
</user>
<user>
<name>cliente2</name>
<password>clientel22</password>
<port>15001</port>
<au>on</au>
<spider>No</spider>
</user>
</newcamdserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<logfile></logfile>
<udp_host></udp_host>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
</newCSconfig>

 

[Fundi]

Misma respuesta que Yersi, utilizando misma configuracíon y alguna vez si se quedo el deco en un canal HD durante muchas horas se peto, pero supongo que es por calentarse.

 

[stickbird]

Me he puesto dos users y ahora en el log veo que el user de mbox04 se conecta, el user de mbox06 se conecta, y al poco el user de mbox04 se desconecta(logout) ,se vuelve a conectar, y así todo el rato, en el Mbox04 lo veo lechuga, y en 06 tambien, la diferencia es que uno se conecta y se desconecta y el otro no! Que raro no? Alguna idea?

Salu2!

 

[Yersi]

Pero ¿los dos mbox en el Azbox?
Eso no funciona en el Azbox, o usas una camd o usas la otra, no funcionan las dos al mismo tiempo, esta muy comentado.

 

[hfmls]

aqui nunca se desconecta.

06 0010

newcs.xml

<newCSconfig>
<readers name="azbox_142">
<device>
<name>upper</name>
<type>azbox</type>
<mhz>370</mhz>
<node>/dev/scard</node>
<parity>odd</parity>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>2A43682BE1D47C70</boxkey>
<rsa>8C9ACC373AA063BC039F489134961F08D78F33B962D19CF1898C12A37C6153AF201DF96D0DFD6A1EB5ADC50C526A4233AE638C3E97910D05A45EE2A464E0BE41</rsa>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>35000</newcamd_port>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password></password>
<level>spam</level>
<type>all</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<udp_host>192.168.1.10</udp_host>
<udp_port>8099</udp_port>
<udp_options>spam,all</udp_options>
<tcp_port>1001</tcp_port>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile>/tmp/users.txt</userfile>
<user>
<name>mbox</name>
<password>mbox</password>
<au>on</au>
<sidoverride>no</sidoverride>
<spider>no</spider>
</user>
<user>
<name>jim</name>
<password>jim01</password>
<au>on</au>
<sidoverride>no</sidoverride>
<spider>no</spider>
</user>
<user>
<name>rfaria</name>
<password>rfaria123</password>
<au>on</au>
<sidoverride>no</sidoverride>
<spider>no</spider>
</user>
<user>
<name>mgcamd</name>
<password>mgcamd</password>
<au>on</au>
<sidoverride>no</sidoverride>
<spider>no</spider>
</user>
<user>
<name>azbox</name>
<password>azbox</password>
<au>on</au>
<sidoverride>no</sidoverride>
<spider>no</spider>
</user>
</newcamdserver>
</newCSconfig>

 

[stickbird]

Pero ¿los dos mbox en el Azbox?
Eso no funciona en el Azbox, o usas una camd o usas la otra, no funcionan las dos al mismo tiempo, esta muy comentado.

Pues yo los tengo los dos funcionando y van bastante bien. De echo el único problema que tenia es que mbox04 se paraba, pero si lo arranco desde telnet ningun problema! Hay un manual de magnoman que explica como hacerlo facil facil. Manual Mbox04 y 06 en AzboxHD


hfmls, he visto varias cosas, a ver si me puedes contar:

- Tienes una linea httpd, es un server web para gestionar newcs? Como lo usas?

- Veo que tienes varios users, se pueden meter los que quieras? Que son de varios decos que tienes?

- Tienes un user para mgcamd, esta camd se usa para poder ver directamente lo que tienes en la local en tu deco verdad? Solo hay que meterla, o hay que configurar alguna linea?

- NewCS solo sirve para compartir la local? O también sirve para leer la card y verlo en el deco? Me explico, si solo meto newcs sin ninguna otra camd, puedo ver lo que tengo en la local?


Gracias de antemano!

Salu2!

 

[hfmls]

so lo uso mgcamd para actualizar lo cartao. enviar EMM. 20...30 mnts me chegam.
newcs só server para ler lo local. necessitas outro camd para ver TV.
com minhas configs httpd, uso um web-interface para ver bad ecms, good ecms, que users estão ligados, etc etc.
si, podes uasr que users pretendes. isso é para varios decos que tengo e para 2 amigos se ligarem ao meu newcs.


aconselho so lo uso de un mbox na azbox hd.

newcs+mbox 04
newcs+mbox 06

não aconselho usar newcs+mbox04+mbox06

 

[stickbird]

so lo uso mgcamd para actualizar lo cartao. enviar EMM. 20...30 mnts me chegam.
newcs só server para ler lo local. necessitas outro camd para ver TV.
com minhas configs httpd, uso um web-interface para ver bad ecms, good ecms, que users estão ligados, etc etc.
si, podes uasr que users pretendes. isso é para varios decos que tengo e para 2 amigos se ligarem ao meu newcs.


aconselho so lo uso de un mbox na azbox hd.

newcs+mbox 04
newcs+mbox 06

não aconselho usar newcs+mbox04+mbox06

Entonces newcs no actualiza la card y solo usas mgcamd para actualizarla, tengo que mirarme como se mete y configura mgcamd.

A ver si hago rular todo el tema ya...

Salu2!

 

[Yersi]

Para actualizar la tarjeta tienes que usar Mgcamd o Sbox, yo como hfmls tampoco te aconsejo usar esta combinacion, pero si dices que te funciona tan bien tu mismo.

 

[stickbird]

jore.... he puesto mgcamd y tb se conecta bien, ahoar tengo, mbox04, mbox06 y mgcamd conectados con un user cada uno al newcs, y en el log del newcs sale esto:

[ 16:12:22 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:13:25 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:13:25 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 16:13:36 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:15:05 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:15:05 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 16:38:53 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:40:10 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:40:10 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 16:40:20 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:41:50 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:41:50 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 16:41:56 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:43:31 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:43:31 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 16:43:46 ] [ Newcamd:20000 ] User mbox04 logout
[ 16:45:12 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 16:45:12 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:00:04 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:00:14 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:00:14 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:00:20 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:01:55 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:01:55 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:02:04 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:03:35 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:03:35 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:03:42 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:05:16 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:05:16 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:26:35 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:26:59 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:26:59 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:27:04 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:28:39 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:28:39 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:28:47 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:30:20 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:30:20 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:31:54 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:32:01 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:32:01 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:32:07 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:33:41 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:33:41 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:33:47 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:35:22 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:35:22 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:35:29 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:37:03 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:37:03 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:37:10 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:38:43 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:38:43 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:38:50 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:40:24 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:40:24 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:47:48 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:48:45 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:48:45 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:48:52 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:50:26 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:50:26 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:50:33 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:52:06 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:52:06 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:52:13 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:53:47 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:53:47 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:53:54 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:55:28 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:55:28 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:55:34 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:57:09 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:57:09 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:57:15 ] [ Newcamd:20000 ] User mbox04 logout
[ 17:58:50 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 17:58:50 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 17:58:56 ] [ Newcamd:20000 ] User mbox04 logout
[ 18:00:30 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 18:00:30 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 18:00:39 ] [ Newcamd:20000 ] User mbox04 logout
[ 18:02:11 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 18:02:11 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 18:02:18 ] [ Newcamd:20000 ] User mbox04 logout
[ 18:03:51 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 18:03:51 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 18:04:00 ] [ Newcamd:20000 ] User mbox04 logout
[ 18:05:32 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 18:05:32 ] [ Newcamd:20000 ] User mbox04 logged in, client: Gbox2CS
[ 18:05:40 ] [ Newcamd:20000 ] User mbox04 logout

Todo el rato, en cambio Mbox06 y mgcamd se mantienen conectados.

Será el Mbox? Tengo el Mbox04 23 y creo que es r3. Es muy raro no?
Alguien que use esta versión de Mbox04 y le funcione bien con newcs me podría mandar su binario y el mbox.cfg?

Gracias!