Gracias hperez, he revisado paso por paso la configuracion de sbox.conf y cccam.cfg y sus permisos 755 y no veo nada extraño, hay que configurar algo mas en cccam.cfg a parte de la linea N???? aqui te dejo lo que tengo en mi sbox.conf y mi cccam.cfg a ver si tu ves algo raro, gracias de antemano:
###############################################
#### Aqui poner debajo los Clientes las (F)####
###############################################
###############################################
#### Aqui debajo poner los Servers (C) ####
###############################################
###############################################
# Aqui debajo la Newcamd Lines (N lines) #
###############################################
N: 192.168.1.4 20000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
###############################################
#### WEB CONFIG ####
###############################################
# #
# ALLOW TELNET INFO : #
# ALLOW TELNETINFO: yes
# ALLOW WEB INFO : #
# ALLOW WEBINFO: yes
# WEBINFO USERNAME : #
# WEBINFO USERNAME : root
# WEBINFO PASSWORD : #
# WEBINFO PASSWORD : javi
# TELNETINFO USERNAME : #
# TELNETINFO USERNAME :
# TELNETINFO PASSWORD : #
# TELNETINFO PASSWORD :
# TELNET INFO LISTEN PORT : #
# TELNETINFO LISTEN PORT : 16000
# WEB INFO LISTEN PORT : #
# WEBINFO LISTEN PORT : 16001
#
###############################################
#### Config ####
###############################################
# SERVER LISTEN PORT : #
SERVER LISTEN PORT : 12000
# INFO LISTEN PORT : #
# INFO LISTEN PORT : 16000
# HTML INFO LISTEN PORT : #
HTML INFO LISTEN PORT : 16001
# ZAP OSD TIME : #
# ZAP OSD TIME :0
# OSD USERNAME : #
# OSD USERNAME :root
# OSD PASSWORD : #
# OSD PASSWORD :javier70
# PHOENIX READER PATH : #
# EMM Blocker #
# SHOW TIMING : #
# SHOW TIMING : no
# DEBUG : #
# DEBUG : no
# NEWCAMD CONF : #
# NEWCAMD CONF :no
# DISABLE EMM : #
# DISABLE EMM : no
# EXTRA EMM LEVEL : #
# EXTRA EMM LEVEL : no
# BOX KEY #
# SERIAL READER : <Phoenix T21> #
# SERIAL READER : /dev/tts/0
# SMARTCARD CLOCK FREQUENCY : <device> <freq>
#
# SMARTCARD CLOCK FREQUENCY: /dev/sci0
# SMARTCARD CLOCK FREQUENCY: /dev/sci1
# SERIAL READER : /dev/usb/tts/0 smartreader+
# SMARTCARD CLOCK FREQUENCY: /dev/ttsUSB0 6000000
# PINCODE : #
# SOFTKEY FILE : #
# SOFTKEY FILE : /camd/lib/SoftCam.Key
# AUTOROLL FILE : #
# AUTOROLL FILE : /camd/lib/AutoRoll.Key
# STATIC CW FILE : #
# STATIC CW FILE : /camd/lib/constant.cw
# CAID PRIO FILE #
CAID PRIO FILE : /PLUGINS/OpenXCAS/DeformCCC/cccam/CCcam.prio
# PROVIDERINFO FILE #
PROVIDERINFO FILE : /PLUGINS/OpenXCAS/DeformCCC/cccam/CCcam.providers
# CHANNELINFO FILE #
CHANNELINFO FILE : /PLUGINS/OpenXCAS/DeformCCC/cccam/CCcam.channelinfo
# LOG WARNINGS : #
#LOG WARNINGS : /tmp/warnings.txt
#
#MINIMUM DOWNHOPS: 0
# #
###############################################
####### Enjoy #######
y el sbox.conf
[main]
server_only=0 # 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=20000 # newcamd port
mhz=357 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER. Example: mhz=357, mhz=368
reader=1
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=1 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu
4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=azbox:
[email protected]:18000/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:12000/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
un saludo
