- 4 Abr 2011
- 23
- 0
- 0
Tengo una tarjeta gris de pago al corriente en un Azbox Premium Hd. Cada dos meses aproximadamente, para actualizar la fecha de validez, o tengo que llamar por telefono, o tengo que meterla en el deco oficial, y es una lata.
La veo con Sbox, sin problemas, pero no me la actualiza.
Me he leido un monton de posts y creo que la configuración está bien, pero no actualiza.
Tengo configurado sbox así:
[main]
server_only=0 # 0=camd+newcamd server 1=only newcamd server
log=0 # 0=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= /PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1eb interface on 0eb interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=20000 # newcamd port
mhz=368 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER
#Nagra2/3 Example
[xxxxx] # nagra2 camid (4 bytes)
rsa= xxxxxxx # rsa "n" from this card (like newcs)
boxkey= xxxxxxx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/****/port.list # path from port.list
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
En todos los emm he puesto 0 pero ni así actualiza.
¿Que estoy haciendo mal?
Gracias por vuestra ayuda.
Saludos.
La veo con Sbox, sin problemas, pero no me la actualiza.
Me he leido un monton de posts y creo que la configuración está bien, pero no actualiza.
Tengo configurado sbox así:
[main]
server_only=0 # 0=camd+newcamd server 1=only newcamd server
log=0 # 0=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath= /PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1eb interface on 0eb interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=20000 # newcamd port
mhz=368 # Mhz for card in this reader, ONLY WORKS ON INTERNAL CARDREADER
#Nagra2/3 Example
[xxxxx] # nagra2 camid (4 bytes)
rsa= xxxxxxx # rsa "n" from this card (like newcs)
boxkey= xxxxxxx # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
#portlist=0 # use portlist or no
#portlistpath=/var/****/port.list # path from port.list
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
En todos los emm he puesto 0 pero ni así actualiza.
¿Que estoy haciendo mal?
Gracias por vuestra ayuda.
Saludos.