[main]
server_only=0 # 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
logudp=192.26.0.1:3354 # server ip:server port
userspath=/var/bin/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webadmin=admin:edk # user:pass for webinterface
webport=8181 # web interface port
rdgserver=0 # 0=radegast server off 1=radegast server on
rdgport=16050 # radegast server port
use_nagra=0 # 1=use as nagra card 0=use as irdeto card (only for nagra over irdeto cards)
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/sci0 # lower
ncdserver=0 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=500 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
cache=0 # how many ecms can be cached, 0 or less=cache disabled
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
#Nagra tiger/ncmed Example
[CCCCCCCC] # nagra camid (4 bytes)
emm=2 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
