Azbox Premium plus 5.0.0003 channel settings

[brokenkey]

Hello,

I've installed the new firmware, but I can't load the channel settings.
Something is changed?
Normally I was coping in etc/tubox Vhannibal settings.

Can you help me?

 

[pe.tardo]

Do you use any soft to do it? dreamboxedit, Dreamset, Dogsettings?
I think you're trying a wrong path, the right one is /etc/enigma2.

 

[brokenkey]

Yes I've used dogsettings, that was ok with previous version 4.0.004

 

[brokenkey]

Do you use any soft to do it? dreamboxedit, Dreamset, Dogsettings?
I think you're trying a wrong path, the right one is /etc/enigma2.

I've also change the path un etc/enigma2 but it doesn't works?
Should I put the same path for channels and bouquet?

 

[pe.tardo]

Using "enigma2" options in dogsettings, it should work good...
Lamedb, userbouquets, and blacklist & whitelist go to /etc/enigma2,
satellites.xml goes to /etc/tuxbox

 

[brokenkey]

Using "enigma2" options in dogsettings, it should work good...
Lamedb, userbouquets, and blacklist & whitelist go to /etc/enigma2,
satellites.xml goes to /etc/tuxbox

Hi tardo,

the problem is that if I load the files in the right directory I can see only some channel, some other appear n/a in the channel menu.
I've tried with Vhannibal, Cyrrus and other setting, I don't understand why it's so strange.
If I load the same file in 4.0.004 it works perfectly.
I've downloaded the 5.0.003 from this site.

Any idea??

 

[pe.tardo]

It seems something was wrong on your frw. Try to flash openspa 5.0.003 again,
and upload your servicelist again.
Good luck.

 

[brokenkey]

It seems something was wrong on your frw. Try to flash openspa 5.0.003 again,
and upload your servicelist again.
Good luck.

Hi again,

after flashing again the box the problem is the same.
I've uploaded channels with dog, aSettings+ and even manually by filezilla. The channel list is now empty, I can see the bouquet name but not any channel, everythung is n/a.
It's very strange!!
In my opinion this firmware has some bug, maybe the skin and some other components.

 

[brokenkey]

One more info, when I finish to upload the settings the box doesn't restart itself I need to roboot it manually.

 

[pe.tardo]

Did you try another servicelist? Btw, did you try your list in other image/stb?
You can try to do a servicescan after load your list.

 

[brokenkey]

Hi Tudor,

I've solved my problem, but it was really tricky.
I found my Ethernet switch that was slow and probably flashing the box that way was creating some errors.
I've replaced the switch and flash again the box. Everything went fine settings and firmware are PERFECT!

thanks for your help

 

[mcnammara]

Hi Tudor,

I've solved my problem, but it was really tricky.
I found my Ethernet switch that was slow and probably flashing the box that way was creating some errors.
I've replaced the switch and flash again the box. Everything went fine settings and firmware are PERFECT!

thanks for your help

Hi
I'm having the same problem, the channel list is cleared, requiring new channel search.
I did not understand your solution.
Can you help me?

 

[brokenkey]

Hi
I'm having the same problem, the channel list is cleared, requiring new channel search.
I did not understand your solution.
Can you help me?

Hi Mac,

sorry for the delay but I was very busy.
The problem was related to a broken ethernet switch, I've replaced it with a new one.
Moreover you've to check carefully the directories were you copy the files.

BYe