Driver para ZD1211b (para bawin)

[ike]

Version svn

Despues de leer otro poco, casi mejor que pruebes esta version.

Es la última version svn, y ademas he añadido el Vendedor y el dispositivo para asegurarnos que carga el driver y lo detecta.

saludos

 

[bawin]

Con el Archivo zd1211b(svn) me sale esto en el log:

MMP login: root
Password:
MMP[~]$ cd /DISK2/etc/Wireless/
MMP[Wireless]$ insmod zd1211b.ko
Using zd1211b.ko
MMP[Wireless]$ dmesg
PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
usbcore: registered new driver snd-usb-audio
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 4200k freed
USB Universal Host Controller Interface driver v2.3
PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.0: irq 22, io base 0x58000000
uhci_hcd 0000:00:02.0: host system error, PCI problems?
uhci_hcd 0000:00:02.0: host controller halted, very bad!
uhci_hcd 0000:00:02.0: HC died; cleaning up
uhci_hcd 0000:00:02.0: USB bus 1 deregistered
uhci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -143
uhci_hcd: probe of 0000:00:02.0 failed with error -143
PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
uhci_hcd 0000:00:02.1: UHCI Host Controller
uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.1: irq 22, io base 0x58000020
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.2: irq 22, io mem 0x60000000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
-RT73-<7>usb_rtusb_init-->
usbcore: registered new driver rt73
llad: module license 'LGPL' taints kernel.
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1570] init_module: begun
em8xxx0 [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.wor
k/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1431] identify: board as unknown subid
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1556] identify: device 0x8634 0x86 accepted with software tango2revA
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1635] mumk_register_tasklet 0xc809a000
mumk_register_tasklet: (0) tasklet c809a000 status @c8e9f984
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[0] 0xc80a7000: pE=0xc8e9f760 ch_idx=3
3 module_id=0x3c 0xc8e9f780
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[1] 0xc80a9000: pE=0xc8e9f760 ch_idx=3
5 module_id=0x3c 0xc8e9f78c
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[2] 0xc80ab000: pE=0xc8e9f760 ch_idx=4
1 module_id=0x13c 0xc8e9f798
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[3] 0xc80ad000: pE=0xc8e9f760 ch_idx=4
3 module_id=0x13c 0xc8e9f7a4
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[4] 0xc80af000: pE=0xc8e9f760 ch_idx=3
7 module_id=0x23c 0xc8e9f7b0
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[5] 0xc80b1000: pE=0xc8e9f760 ch_idx=3
9 module_id=0x23c 0xc8e9f7bc
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[6] 0xc80b3000: pE=0xc8e9f760 ch_idx=6
9 module_id=0x3f 0xc8e9f7c8
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1732] init_module: done. Found 1 em8xxx
scard: SMP8634 driver loaded (rd_buffer_size = 256, wr_buffer_size = 256, freq = 3600000)
scard0: scard present detected.
[2009-08-19 v1.7.0D] scard0: scard activation starts ..[Tx_Mode=0]
scard0: Try 5V ..
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Got response from 5V setting ..[priv->ans_idx = 12]
Answering: 0x3f 0x77 0x18 0x00 0x00 0xc2 0x47 0x40 0x00 0x68 0x90 0x00
-->> ATR Parsing Disable [priv->ans_idx = 12]
ATRXBuf = [
3F
]
Correct ts detected 0x3f
scard0: got response from the scard --> switch to normal
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
em8xxx0 [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.wor
k/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1237] EMhwlibUnregisterCleanable module 45, prop 4543 (from rmmod em8xx
x_id 852): not found
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
ZD1211B - SourceForge.net: ZD1211 USB WLAN Linux Driver - Develop - SVN_TRUNK
Based on Wireless,computer,Zydas ZD-1211 driver,Wireless Usb Adapter, driver version 2.5.0.0
usb 2-1: reset high speed USB device using ehci_hcd and address 2
Release Ver = 4810
zd1211:bulk out: wMaxPacketSize = 200
zd1211:bulk in: wMaxPacketSize = 200
zd1211:interrupt in: wMaxPacketSize = 40
zd1211:interrupt in: int_interval = 1
zd1211:interrupt out: wMaxPacketSize = 40
EEPORM Ver = 4810
zd1211:USB Download Boot code success
zd1211:MAC address = 00:25:86:e9:37:12
zd1211:AddrEntryTable = f7c6
zd1211:RF_Mode = 00002008
PA type: 0
RF_Mode = 8
zd1211:Mixed Mode
zd1211:AllowedChannel = 000007ff
zd1211:LinkLEDn = 200
AllowedChannel = 000107ff
Region:48
zd1205: (exit) zd1205_config, /DATA/Yellow/Working/zd1211/trunk/src/zd1205.c line 2607
zd1205: (exit) zd1205_init, /DATA/Yellow/Working/zd1211/trunk/src/zd1205.c line 8582
usbcore: registered new driver zd1211b
MMP[Wireless]$

 

[ike]

Teclea

ifconfig eth1 up

y pega el resultado.

 

[bawin]

Y con el otro archivo zd1211b(22) el log:

MMP[Wireless]$ insmod zd1211b.ko
Using zd1211b.ko
MMP[Wireless]$ dmesg
shes not supported
hda: hda1 hda2 hda3 hda4
physmap flash device CS2: 800000 at 48000000
CS2: Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Using physmap partition definition
Adding partition #1-#5
Creating 5 MTD partitions on "CS2: Physically mapped flash":
0x00000000-0x00020000 : "CS2-Part1"
0x00020000-0x00040000 : "CS2-Part2"
0x00040000-0x00080000 : "CS2-Part3"
0x00080000-0x00700000 : "CS2-Part4"
0x00700000-0x00800000 : "CS2-Part5"
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
usbcore: registered new driver snd-usb-audio
ALSA device list:
No soundcards found.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 4200k freed
USB Universal Host Controller Interface driver v2.3
PCI: Enabling device 0000:00:02.0 (0000 -> 0001)
uhci_hcd 0000:00:02.0: UHCI Host Controller
uhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.0: irq 22, io base 0x58000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:02.1 (0000 -> 0001)
uhci_hcd 0000:00:02.1: UHCI Host Controller
uhci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:02.1: irq 22, io base 0x58000020
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:02.2 (0000 -> 0002)
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:02.2: irq 22, io mem 0x60000000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: new high speed USB device using ehci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda4, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
llad: module license 'LGPL' taints kernel.
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1570] init_module: begun
em8xxx0 [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.wor
k/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1431] identify: board as unknown subid
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1556] identify: device 0x8634 0x86 accepted with software tango2revA
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1635] mumk_register_tasklet 0xc809a000
mumk_register_tasklet: (0) tasklet c809a000 status @c8d9e984
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[0] 0xc80a7000: pE=0xc8d9e760 ch_idx=3
3 module_id=0x3c 0xc8d9e780
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[1] 0xc80a9000: pE=0xc8d9e760 ch_idx=3
5 module_id=0x3c 0xc8d9e78c
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[2] 0xc80ab000: pE=0xc8d9e760 ch_idx=4
1 module_id=0x13c 0xc8d9e798
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[3] 0xc80ad000: pE=0xc8d9e760 ch_idx=4
3 module_id=0x13c 0xc8d9e7a4
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[4] 0xc80af000: pE=0xc8d9e760 ch_idx=3
7 module_id=0x23c 0xc8d9e7b0
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[5] 0xc80b1000: pE=0xc8d9e760 ch_idx=3
9 module_id=0x23c 0xc8d9e7bc
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:353] mumk_register_channel_tasklet[6] 0xc80b3000: pE=0xc8d9e760 ch_idx=6
9 module_id=0x3f 0xc8d9e7c8
em8xxx [/DATA/Yellow/Working/SigmaDesign8634/SMP8634-2850.gcc3.4/mrua_SMP8634_2.8.5.1_facsprod_legacy_dev.mips.dts.work
/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1732] init_module: done. Found 1 em8xxx
scard: SMP8634 driver loaded (rd_buffer_size = 256, wr_buffer_size = 256, freq = 3600000)
scard0: scard present detected.
[2009-08-19 v1.7.0D] scard0: scard activation starts ..[Tx_Mode=0]
scard0: Try 5V ..
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new driver ftdi_sio
drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
Got response from 5V setting ..[priv->ans_idx = 12]
Answering: 0x3f 0x77 0x18 0x00 0x00 0xc2 0x47 0x40 0x00 0x68 0x90 0x00
-->> ATR Parsing Disable [priv->ans_idx = 12]
ATRXBuf = [
3F
]
Correct ts detected 0x3f
scard0: got response from the scard --> switch to normal
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
ZD1211B - version 2.22.0.0-development
vendor_id = 0ace
product_id = 1215
USB 2.0 Host
Release Ver = 4810
EEPORM Ver = 4810
Finsih download Firmware. Ready to reboot
PA type: 0
AR2124 RF
OverWrite CR157 = 0xF0
zd1205_config: EEP(HWFeature)=0x2000
AllowedChannel = 000107ff
Region:48
usbcore: registered new driver zd1211b
MMP[Wireless]$

 

[ike]

Pues este ultimo parece que no da error....

Falta saber si crea el dispositivo eth1

Que dispositivo te crea en el Ubuntu eth1????

 

[bawin]

Le eh echo un ifconfig eth1 al Azboxhd:

MMP[~]$ ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:25:86:E9:36:D9
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Detectar lo detecta ya.

Y si le ago solo el ifconfig:

MMP[~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:02:14:13:E7:88
inet addr:192.168.100.143 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:197 errors:0 dropped:0 overruns:0 frame:0
TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12613 (12.3 KiB) TX bytes:14842 (14.4 KiB)
Interrupt:46

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:852 errors:0 dropped:0 overruns:0 frame:0
TX packets:852 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:276328 (269.8 KiB) TX bytes:276328 (269.8 KiB)

 

[ike]

eth1 Link encap:Ethernet HWaddr 00:25:86:E9:36:D9

Pues en principio está: ya tienes dispositivo wifi (eth1)

Solo te falta configurarlo. Sigue el post que puse del driver RT73, pero cambiando rausb0 por eth1

Deberia funcionar....

saludos

 

[bawin]

Eh esho esto eh cambiado todo los rausb0 por eth1 y eh renombrado pre-up.rausb0 por
pre-up.eth1.

#!/bin/sh

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib:/MMP/usr/lib

echo ">> pre-up.eth1 start..."

sleep 1

ln -s /DISK2/etc/Wireless/rt73.bin /etc/rt73.bin
ln -s /DISK2/etc/Wireless/rt73sta.dat /etc/rt73sta.dat
insmod /DISK2/etc/Wireless/rt73.ko
sleep 1
ifconfig eth1 192.168.1.171 netmask 255.255.255.0 up
sleep 1
ifconfig eth1 up
sleep 1
iwconfig eth1 mode managed
sleep 1
iwpriv eth1 set EncrypType=AES
sleep 1
iwpriv eth1 set AuthMode=WPA2PSK
sleep 1
iwconfig eth1 essid meussid
sleep 1
iwpriv eth1 set WPAPSK="chaveWPA"
sleep 1
iwconfig eth1 essid meussid
sleep 1
ifdown eth0
echo ">> pre-up end..."


Y en interface cabie asi:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.100.143
netmask 255.255.255.0
gateway 192.168.100.1
pre-up /DISK2/pre-up.eth0
auto eth1
iface eth1 inet static
address 192.168.100.144
netmask 255.255.255.0
gateway 192.168.100.1
pre-up /DISK2/pre-up.eth1


Pero ai no ace nada y los rt73 le pongo zd1211b pero esto no va.

 

[ike]

Vamos por partes...

A ver si lo conseguimos de manera manual y luego lo intentamos dejar fijo.

En primer lugar debes configurar tu router wifi sin ningun tipo de clave wep, wpa ni ninguna, para que se conecte todo el mundo. Una vez probado esto teclear:

ifconfig eth1 192.168.100.143 netmask 255.255.255.0 (He visto que estas son las IP's que utlizadas en los ficheros tienes que verificar que es de verdad esa red)

Esto configura la red IP en eth1.

Ahora vamos con el wifi.

Tecleamos:

iwconfig eth1 mode managed
iwconfig eth1 essid tu_essid_wifi

Cambiamos tu_essid_wifi por el nombre que le hayas dado a tu web.

Una vez hecho esto veo que el IP de tu router es la 192.168.100.1 (Confirma que es asi)

Tecleamos:

ping 192.168.100.1

Y te debe salir algo comoe esto:

PING 192.168.100.1 (192.168.100.1): 56 data bytes
64 bytes from 192.168.100.1: icmp_seq=0 ttl=64 time=2.5 ms
64 bytes from 192.168.100.1: icmp_seq=1 ttl=64 time=0.5 ms
64 bytes from 192.168.100.1: icmp_seq=2 ttl=64 time=0.5 ms


Pruebalo y me dices. Si alguno de los comandos te da error pega aqui el error.

saludos

 

[bawin]

Eh echo eso y no me ah dado ningun error y me sale esto:
ifconfig eth1 192.168.100.144 netmask 255.255.255.0 broadcast 192.168.100.1

MMP[~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:02:14:13:E7:88
inet addr:192.168.100.143 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1529 errors:0 dropped:0 overruns:0 frame:0
TX packets:1962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:101735 (99.3 KiB) TX bytes:156936 (153.2 KiB)
Interrupt:46

eth1 Link encap:Ethernet HWaddr 00:25:86:E9:37:12
inet addr:192.168.100.144 Bcast:192.168.100.1 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2190 errors:0 dropped:0 overruns:0 frame:0
TX packets:612 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:443731 (433.3 KiB) TX bytes:53280 (52.0 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3664 errors:0 dropped:0 overruns:0 frame:0
TX packets:3664 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1125856 (1.0 MiB) TX bytes:1125856 (1.0 MiB)

MMP[~]$ ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes

Pero el ping no me da como el tuyo en cambio en el router sale como conectado como cliente el usb wifi.

 

[ike]

Y si tecleas:

iwconfig eth1

A ver que datos pone.

Verifica que la IP de tu router es 192.168.100.1

Y prueba a hacer un ping a 192.168.100.143 (que es la ip cableada de deco)

A ver....

 

[bawin]

Eh echo el iwconfig eth1:

MMP[Wireless]$ iwconfig eth1
Warning: Driver for device eth1 has been compiled with version 19
of Wireless Extension, while this program supports up to version 17.
Some things may be broken...

eth1 802.11b/g NIC ESSID:"B@WiN"
Mode:Managed Frequency=2.462 GHz Access Point: 00:1D:73:55:68:E6
Bit Rate:0 kb/s
Retry:off RTS thr=9999 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:63/100 Signal level:38/100 Noise level:0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:7 Missed beacon:0

Le eh echo el ping

MMP[Wireless]$ ping 192.168.100.103
PING 192.168.100.103 (192.168.100.103): 56 data bytes

El cable va de pc a deco.

 

[ike]

Cual es la IP de router???

El ping debe ser:

ping 192.168.100.143 (que la ip del deco)

Pega sino aqui el resultado de:

route

 

[bawin]

La ip del router es la 192.168.100.1 y la del deco por cable de red 192.168.100.143 y por wifi es la 192.168.100.144 es la que tengo puesta y todas me ace lo mismo.

Ping 192.168.100.144 Usb wifi

MMP[~]$ ping 192.168.100.144
PING 192.168.100.144 (192.168.100.144): 56 data bytes
64 bytes from 192.168.100.144: icmp_seq=0 ttl=64 time=2.5 ms
64 bytes from 192.168.100.144: icmp_seq=1 ttl=64 time=0.3 ms
64 bytes from 192.168.100.144: icmp_seq=2 ttl=64 time=1.0 ms
64 bytes from 192.168.100.144: icmp_seq=3 ttl=64 time=0.9 ms
64 bytes from 192.168.100.144: icmp_seq=4 ttl=64 time=0.4 ms
64 bytes from 192.168.100.144: icmp_seq=5 ttl=64 time=0.6 ms

Ping 192.168.100.143 Cable deco a pc

MMP[~]$ ping 192.168.100.143
PING 192.168.100.143 (192.168.100.143): 56 data bytes
64 bytes from 192.168.100.143: icmp_seq=0 ttl=64 time=0.5 ms
64 bytes from 192.168.100.143: icmp_seq=1 ttl=64 time=0.4 ms
64 bytes from 192.168.100.143: icmp_seq=2 ttl=64 time=0.4 ms
64 bytes from 192.168.100.143: icmp_seq=3 ttl=64 time=0.4 ms
64 bytes from 192.168.100.143: icmp_seq=4 ttl=64 time=0.4 ms
64 bytes from 192.168.100.143: icmp_seq=5 ttl=64 time=0.8 ms

Ping 192.168.100.1 Router

MMP[~]$ ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes

 

[ike]

Bueno pues si has quitado la clave WIFI del router solo te falta:

iwconfig eth1 mode managed
iwconfig eth1 essid B@WiN

route add default gw 192.168.100.1

Una vez echo esto pega el resultado de ifconfig, iwconfig y route.

saludos

 

[bawin]

Aqui est lo que me has dicho:

MMP[~]$ cd /DISK2/etc/Wireless/
MMP[Wireless]$ insmod zd1211b.ko
Using zd1211b.ko
ifconfig eth1 192.168.100.144 netmask 255.255.255.0 broadcast 192.168.100.1
MMP[Wireless]$ iwconfig eth1 mode managed
MMP[Wireless]$ iwconfig eth1 essid B@WiN
MMP[Wireless]$ route add default gw 192.168.100.1
route: SIOC[ADD|DEL]RT: Network is unreachable
MMP[Wireless]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:02:14:13:E7:88
inet addr:192.168.100.143 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:352 errors:0 dropped:0 overruns:0 frame:0
TX packets:256 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23857 (23.2 KiB) TX bytes:14306 (13.9 KiB)
Interrupt:46

eth1 Link encap:Ethernet HWaddr 00:25:86:E9:37:12
inet addr:192.168.100.144 Bcast:192.168.100.1 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1642 errors:0 dropped:0 overruns:0 frame:0
TX packets:1642 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:552477 (539.5 KiB) TX bytes:552477 (539.5 KiB)

MMP[Wireless]$ ping 192.168.100.1
PING 192.168.100.1 (192.168.100.1): 56 data bytes

 

[ike]

Te falta el iwconfig y el route

Seguro que tienes la configuracion del router wifi abierta sin que pida clave????

Se me están agotando las pruebas.....

Ademas estoy pensando que el ping al router deberia funcionar en cualquier caso ya que estas conectado por red de cable y eso no falla nunca....

 

[bawin]

Si lo tengo abierto sin clave y el deco no lo tengo enchufado al router directo porque lo tengo en la otra punta de la casa y lo ago con el portatil por cable para las configuraciones al azbox por eso el usb wifi lo tengo puesto en el deco para no echar cable.

Lo que quiero decir que el deco no esta por cable conectado directamente al router.

 

[ike]

Ahhh, vale.... ya me parecia....

Pues pon lo que te da el iwconfig y el route. (si tarda mucho en salir pon route -n)

El ping hazlo entonces a la IP del portatil.

 

[bawin]

MMP[Wireless]$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

Warning: Driver for device eth1 has been compiled with version 19
of Wireless Extension, while this program supports up to version 17.
Some things may be broken...

eth1 802.11b/g NIC ESSID:"B@WiN"
Mode:Managed Frequency=2.462 GHz Access Point: 00:00:00:00:00:00
Bit Rate:1 Mb/s
Retry:off RTS thr=9999 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

MMP[Wireless]$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.100.0 * 255.255.255.0 U 0 0 0 eth0
192.168.100.0 * 255.255.255.0 U 0 0 0 eth1
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
MMP[Wireless]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
MMP[Wireless]$