OpenSPA Enigma2 crash log
crashdate=dom out 15 10:30:05 2023
compiledate=Jun 25 2023
skin=BlackSPA/skin.xml
sourcedate=2023-06-25
branch=master
rev=830+bb0a82b
component=Enigma2
model=ustym4kpro
machinebuild=ustym4kpro
imageversion=8.1
imagebuild=003
kernelcmdline=console=ttyAMA0,115200 root=/dev/mmcblk0p16 rootsubdir=linuxrootfs4 rootfstype=ext4 kernel=/dev/mmcblk0p15 userdataroot=/dev/mmcblk0p16 userdatasubdir=userdata4 blkdevparts=mmcblk0:1M(boot),1M(bootargs),1M(bootoptions),3M(baseparam),4M(pqparam),4M(logo),4M(deviceinfo),4M(softwareinfo),4M(loaderdb),32M(loader),8M(trustedcore),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),-(userdata) coherent_pool=2M mem=1G mmz=ddr,0,0,72M vmalloc=500M MACHINEBUILD=ustym4kpro OEM=uclan MODEL=ustym4kpro
nimsockets:
NIM Socket 0:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 0
I2C_Device: 0
NIM Socket 1:
Type: DVB-S2X
Name: Si2166D
Has_Outputs: no
Frontend_Device: 1
I2C_Device: 1
NIM Socket 2:
Type: DVB-T
Name: MDTV Receiver
Has_Outputs: no
Frontend_Device: 2
I2C_Device: 2
bin/opbitrate 0 0 6813 6811
00:19:38.9673 [openSPATVGuide] fallback to default translation for No events available
00:19:39.0233 [eDVBServicePMTHandler] PATready
00:19:39.0234 [eDVBServicePMTHandler] PAT TSID: 0x0044 (68)
00:19:39.0234 [eDVBServicePMTHandler] use pmtpid 1aa4 for service_id 0355
00:19:39.0235 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.0235 [eDVBSectionReader] DMX_SET_FILTER pid=6820
00:19:39.0290 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.0294 [eDVBSectionReader] DMX_SET_FILTER pid=0
00:19:39.0311 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.0313 [eDVBSectionReader] DMX_SET_FILTER pid=6730
00:19:39.0318 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.0319 [eDVBSectionReader] DMX_SET_FILTER pid=17
00:19:39.0895 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.0896 [eDVBSectionReader] DMX_SET_FILTER pid=6750
00:19:39.0902 [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
00:19:39.0907 [eDVBServicePlay] have 1 video stream(s) (1a9d), and 1 audio stream(s) (1a9b), and the pcr pid is 1a9d, and the text pid is ffffffff
00:19:39.0909 [eDVBServicePlay] Setting audio delay: setAC3Delay, 0 + 0
00:19:39.0910 [eDVBServicePlay] Setting audio delay: setPCMDelay, 0 + 0
00:19:39.0910 [eTSMPEGDecoder] decoder state: play, vpid=1a9d, apid=1a9b
00:19:39.0910 [eDVBVideo0] VIDEO_SLOWMOTION 0 ok00:19:39.0911 [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok00:19:39.0911 [eDVBVideo0] VIDEO_CONTINUE ok00:19:39.0911 [eDVBAudio0] AUDIO_CONTINUE ok00:19:39.0983 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.0986 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.1022 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.1025 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.1029 [eDVBCIInterfaces] gotPMT
00:19:39.1031 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.1032 [eDVBSectionReader] DMX_SET_FILTER pid=6820
00:19:39.1834 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.1836 [eConsoleAppContainer] Starting /bin/sh
00:19:39.1845 /usr/bin/opbitrate 0 0 6813 6811
00:19:39.1847 [eConsoleAppContainer] Starting /bin/sh
00:19:39.1859 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.1861 [eDVBSectionReader] DMX_SET_FILTER pid=6740
00:19:39.2867 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.2869 [eDVBSectionReader] DMX_SET_FILTER pid=6720
00:19:39.2875 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.2875 [eDVBSectionReader] DMX_SET_FILTER pid=6790
00:19:39.3824 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.3826 [eDVBSectionReader] DMX_SET_FILTER pid=6780
00:19:39.3832 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.3833 [eDVBSectionReader] DMX_SET_FILTER pid=6700
00:19:39.4799 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.4800 [eDVBSectionReader] DMX_SET_FILTER pid=6710
00:19:39.4892 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
00:19:39.4893 [eDVBSectionReader] DMX_SET_FILTER pid=6770
00:19:39.5266 [eDVBLocalTimerHandler] updateTime : 1697376544
00:19:39.5268 [eDVBLocalTimerHandler] Transponder time is 15/10/2023 10:29:04.
00:19:39.5268 [eDVBLocalTimerHandler] We don't have correction, set transponder difference.
00:19:39.5268 [eDVBLocalTimerHandler] Set RTC time.
10:29:04.0000 [eDVBLocalTimerHandler] Update RTC.
10:29:04.0000 [eDVBLocalTimerHandler] Time updated to 10:29:04.
10:29:04.0001 [eDVBLocalTimerHandler] Time difference is 36565.
10:29:04.0001 [eDVBLocalTimerHandler] Stepped Linux time to 10:29:04.
10:29:04.0004 [eDVBLocalTimerHandler] updateTime : 0
10:29:04.0004 [eDVBChannel] getDemux cap=00
10:29:04.0062 b'0 0\n'
10:29:04.0064 0 Kb/s
10:29:04.0064 b'0 0\n'
10:29:04.0065 0 Kb/s
10:29:04.0571 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
10:29:04.0573 [eDVBSectionReader] DMX_SET_FILTER pid=6800
10:29:04.0633 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
10:29:04.0634 [eDVBSectionReader] DMX_SET_FILTER pid=6760
10:29:04.0963 [Avahi] watch activated: 0x1
10:29:04.0965 [Avahi] REMOVE service 'ustym4kpro' of type '_e2stream._tcp' in domain 'local'
10:29:04.0966 [eServicePeer] REMOVE Peer ustym4kpro
10:29:04.0968 [Avahi] watch activated: 0x1
10:29:04.0969 [Avahi] REMOVE service 'ustym4kpro' of type '_e2stream._tcp' in domain 'local'
10:29:04.0969 [eServicePeer] REMOVE Peer ustym4kpro
10:29:04.0982 [Avahi] watch activated: 0x1
10:29:04.0983 [Avahi] REMOVE service 'ustym4kpro' of type '_e2stream._tcp' in domain 'local'
10:29:04.0983 [eServicePeer] REMOVE Peer ustym4kpro
10:29:04.1537 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
10:29:04.1539 [eDVBSectionReader] DMX_SET_FILTER pid=6810
10:29:04.1544 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
10:29:04.1545 [eDVBSectionReader] DMX_SET_FILTER pid=6820
10:29:04.1681 /usr/bin/opbitrate 0 0 6813 6811
10:29:04.1682 [eConsoleAppContainer] Starting /bin/sh
10:29:04.1698 [eDVBDemux] open demux /dev/dvb/adapter0/demux0
10:29:04.1700 [eDVBSectionReader] DMX_SET_FILTER pid=6830
10:29:04.1710 /usr/bin/opbitrate 0 0 6813 6811
10:29:04.1711 [eConsoleAppContainer] Starting /bin/sh
10:29:04.2105 [Avahi] watch activated: 0x1
10:29:04.2107 [Avahi] Resolving service 'ustym4kpro' of type '_e2stream._tcp'
10:29:04.2114 [Avahi] Resolving service 'ustym4kpro' of type '_e2stream._tcp'
10:29:04.2120 [Avahi] Resolving service 'ustym4kpro' of type '_e2stream._tcp'
10:29:04.6564 /usr/bin/opbitrate 0 0 6813 6811
10:29:04.6569 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.1567 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.1572 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.2527 b'2307 172\n'
10:29:05.2530 2307 Kb/s
10:29:05.2540 b'2488 172\n'
10:29:05.2544 172 Kb/s
10:29:05.3051 [eEPGChannelData] start reading events(1697376545)
10:29:05.3055 [eDVBSectionReader] DMX_SET_FILTER pid=211
10:29:05.3083 [eDVBSectionReader] DMX_SET_FILTER pid=561
10:29:05.3091 [eDVBSectionReader] DMX_SET_FILTER pid=3842
10:29:05.3095 [eDVBSectionReader] DMX_SET_FILTER pid=3003
10:29:05.3097 [eDVBSectionReader] DMX_SET_FILTER pid=18
10:29:05.3100 [eDVBSectionReader] DMX_SET_FILTER pid=18
10:29:05.3102 [eDVBSectionReader] DMX_SET_FILTER pid=18
10:29:05.3105 [eDVBSectionReader] DMX_SET_FILTER pid=5000
10:29:05.3106 [eDVBSectionReader] DMX_SET_FILTER pid=5000
10:29:05.3114 [eEPGChannelData] abort non avail OpenTV EIT reading
10:29:05.3114 [eDVBSectionReader] DMX_SET_FILTER pid=57
10:29:05.4150 [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
10:29:05.4228 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.4230 [eConsoleAppContainer] Starting /bin/sh
10:29:05.4242 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.4244 [eConsoleAppContainer] Starting /bin/sh
10:29:05.4257 [eDVBVideo0] VIDEO_GET_EVENT FRAME_RATE_CHANGED 30000 fps
10:29:05.7912 /usr/bin/opbitrate 0 0 6813 6811
10:29:05.7916 /usr/bin/opbitrate 0 0 6813 6811
10:29:06.1563 /usr/bin/opbitrate 0 0 6813 6811
10:29:06.1566 /usr/bin/opbitrate 0 0 6813 6811
10:29:06.4693 b'3039 156\n'
10:29:06.4695 3039 Kb/s
10:29:06.4698 b'3479 179\n'
10:29:06.4699 179 Kb/s
10:29:06.6566 /usr/bin/opbitrate 0 0 6813 6811
10:29:06.6567 [eConsoleAppContainer] Starting /bin/sh
10:29:06.6580 /usr/bin/opbitrate 0 0 6813 6811
10:29:06.6581 [eConsoleAppContainer] Starting /bin/sh
10:29:07.1648 /usr/bin/opbitrate 0 0 6813 6811
10:29:07.1653 /usr/bin/opbitrate 0 0 6813 6811
10:29:07.4618 [eDVBServicePMTHandler] sdt update done!
10:29:07.4626 [spzCAMD] Started
10:29:07.5703 [spzCAMD] fallback to default translation for Start Camd:
10:29:07.5715 [spzCAMD] fallback to default translation for spzCAMD
10:29:07.5721 [Notifications] RemovePopup id = spzCAMD
10:29:07.6226 [ActionMap] Map contexts 'DirectionActions', 'EPGSelectActions', 'InfobarActions', 'MenuActions', 'ShortcutActions', 'WizardActions': Undefined action 'home'.
10:29:07.6231 [Skin] Parsing embedded skin '<embedded-in-scrInformation>'.
10:29:07.6238 [Skin] Processing screen '<embedded-in-scrInformation>', position=(1270, 80), size=(600x60) for module 'scrInformation'.
10:29:07.6355 [Skin] Processing screen 'SimpleSummary' from list 'scrInformation_summary, SimpleSummary', position=(0, 0), size=(1x1) for module 'SimpleSummary'.
10:29:07.6386 [Screen] Showing screen '['scrInformation_summary', 'SimpleSummary']'.
10:29:07.6396 [Screen] Showing screen 'scrInformation'.
10:29:07.6851 b'3086 182\n'
10:29:07.6854 3086 Kb/s
10:29:07.6855 b'3086 182\n'
10:29:07.6855 182 Kb/s
10:29:08.7932
10:29:08.7934 pngname:
10:29:08.7940 /usr/bin/opbitrate 0 0 6813 6811
10:29:08.7941 [eConsoleAppContainer] Starting /bin/sh
10:29:08.7950 /usr/bin/opbitrate 0 0 6813 6811
10:29:08.7951 [eConsoleAppContainer] Starting /bin/sh
10:29:08.8082
10:29:08.8085 pngname:
10:29:08.8103 /usr/bin/opbitrate 0 0 6813 6811
10:29:08.8109 /usr/bin/opbitrate 0 0 6813 6811
10:29:08.8178
10:29:08.8182 pngname:
10:29:08.8188 /usr/bin/opbitrate 0 0 6813 6811
10:29:08.8190 /usr/bin/opbitrate 0 0 6813 6811
10:29:09.8339 b'2138 180\n'
10:29:09.8342 180 Kb/s
10:29:09.8348 b'2136 180\n'
10:29:09.8349 2136 Kb/s
10:29:12.3133 [eEPGChannelData] abort non avail schedule other reading
10:29:12.3138 [eEPGChannelData] abort non avail netmed schedule reading
10:29:12.3140 [eEPGChannelData] abort non avail netmed schedule other reading
10:29:12.3141 [eEPGChannelData] abort non avail FreeSat schedule_other reading
10:29:12.3143 [eEPGChannelData] abort non avail viasat reading
10:29:12.3145 [eEPGChannelData] abort non avail mhw reading
10:29:16.6386 [Screen] Showing screen 'InfoBarSummary'.
10:29:16.6417 [Screen] Showing screen 'InfoBar'.
10:29:16.6436
10:29:16.6439 pngname:
10:29:16.6439
10:29:16.6440 pngname:
10:29:16.6968 /usr/bin/opbitrate 0 0 6813 6811
10:29:16.6969 [eConsoleAppContainer] Starting /bin/sh
10:29:16.6999 /usr/bin/opbitrate 0 0 6813 6811
10:29:16.7000 [eConsoleAppContainer] Starting /bin/sh
10:29:17.2001 /usr/bin/opbitrate 0 0 6813 6811
10:29:17.2019 /usr/bin/opbitrate 0 0 6813 6811
10:29:17.7037 /usr/bin/opbitrate 0 0 6813 6811
10:29:17.7040 /usr/bin/opbitrate 0 0 6813 6811
10:29:17.7505 b'3329 178\n'
10:29:17.7506 3329 Kb/s
10:29:17.7525 b'3332 178\n'
10:29:17.7528 178 Kb/s
10:29:18.2001 /usr/bin/opbitrate 0 0 6813 6811
10:29:18.2002 [eConsoleAppContainer] Starting /bin/sh
10:29:18.2022 /usr/bin/opbitrate 0 0 6813 6811
10:29:18.2024 [eConsoleAppContainer] Starting /bin/sh
10:29:18.7000 /usr/bin/opbitrate 0 0 6813 6811
10:29:18.7019 /usr/bin/opbitrate 0 0 6813 6811
10:29:19.2000 /usr/bin/opbitrate 0 0 6813 6811
10:29:19.2019 /usr/bin/opbitrate 0 0 6813 6811
10:29:19.3051 b'3654 168\n'
10:29:19.3053 3654 Kb/s
10:29:19.3070 b'3776 169\n'
10:29:19.3071 169 Kb/s
10:29:19.7019 /usr/bin/opbitrate 0 0 6813 6811
10:29:19.7021 [eConsoleAppContainer] Starting /bin/sh
10:29:19.7031 /usr/bin/opbitrate 0 0 6813 6811
10:29:19.7034 [eConsoleAppContainer] Starting /bin/sh
10:29:20.2015 /usr/bin/opbitrate 0 0 6813 6811
10:29:20.2021 /usr/bin/opbitrate 0 0 6813 6811
10:29:20.6998 /usr/bin/opbitrate 0 0 6813 6811
10:29:20.7020 /usr/bin/opbitrate 0 0 6813 6811
10:29:20.7446 b'2891 158\n'
10:29:20.7448 2891 Kb/s
10:29:20.7449 b'3035 158\n'
10:29:20.7450 158 Kb/s
10:29:21.2000 /usr/bin/opbitrate 0 0 6813 6811
10:29:21.2002 [eConsoleAppContainer] Starting /bin/sh
10:29:21.2039 /usr/bin/opbitrate 0 0 6813 6811
10:29:21.2046 [eConsoleAppContainer] Starting /bin/sh
10:29:21.7002 /usr/bin/opbitrate 0 0 6813 6811
10:29:21.7028 /usr/bin/opbitrate 0 0 6813 6811
10:29:22.3135 b'3410 190\n'
10:29:22.3137 3410 Kb/s
10:29:22.3138 b'3417 191\n'
10:29:22.3139 191 Kb/s
10:29:27.4759 [eEPGChannelData] nownext finished(1697376567)
10:29:31.0791
10:29:31.0793 pngname:
10:29:31.0803
10:29:31.0804 pngname:
10:30:03.6405 [gRC] Warning: Main thread is busy, displaying spinner!
10:30:04.4034 [StackTrace] ========== Stacktrace of active Python threads ===========
10:30:04.4036 [StackTrace] ========== Thread ID 0xac606380 =========================
10:30:04.4037 [StackTrace] File: "/usr/lib/python3.8/threading.py", line 890, in _bootstrap
10:30:04.4037 [StackTrace] File: "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner
10:30:04.4037 [StackTrace] File: "/usr/lib/python3.8/threading.py", line 870, in run
10:30:04.4038 [StackTrace] File: "/usr/lib/python3.8/site-packages/twisted/_threads/_threadworker.py", line 46, in work
10:30:04.4038 [StackTrace] File: "/usr/lib/python3.8/queue.py", line 170, in get
10:30:04.4039 [StackTrace] File: "/usr/lib/python3.8/threading.py", line 302, in wait
10:30:04.4039 [StackTrace] ========== MainThread 0xb4d98d00 =========================
10:30:04.4039 [StackTrace] File: "/usr/lib/enigma2/python/StartEnigma.py", line 949, in <module>
10:30:04.4040 [StackTrace] runScreenTest() # Start running the first screen.
10:30:04.4040 [StackTrace] File: "/usr/lib/enigma2/python/StartEnigma.py", line 457, in runScreenTest
10:30:04.4041 [StackTrace] runReactor()
10:30:04.4042 [StackTrace] File: "/usr/lib/enigma2/python/StartEnigma.py", line 630, in runReactor
10:30:04.4042 [StackTrace] reactor.run(installSignalHandlers=False)
10:30:04.4043 [StackTrace] File: "/usr/lib/python3.8/site-packages/twisted/internet/base.py", line 1318, in run
10:30:04.4043 [StackTrace] File: "/usr/lib/python3.8/site-packages/twisted/internet/base.py", line 1331, in mainLoop
10:30:04.4044 [StackTrace] File: "/usr/lib/enigma2/python/e2reactor.py", line 156, in doPoll
10:30:04.4044 [StackTrace] File: "/usr/lib/enigma2/python/e2reactor.py", line 45, in poll
10:30:04.4045 [StackTrace] File: "/mnt/storage/jenkinsWS/OpenSpa/testspa8.1/builds/openspa/ustym4kpro/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-extensions-plutotv/1.2+gitAUTOINC+ae3b2dd600-r0/image/usr/lib/enigma2/python/Plugins/Extensions/PlutoTV/PlutoDownload.py", line 594, in download
10:30:04.4045 [StackTrace] File: "/mnt/storage/jenkinsWS/OpenSpa/testspa8.1/builds/openspa/ustym4kpro/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-extensions-plutotv/1.2+gitAUTOINC+ae3b2dd600-r0/image/usr/lib/enigma2/python/Plugins/Extensions/PlutoTV/PlutoDownload.py", line 183, in getGuidedata
10:30:04.4046 [StackTrace] File: "/mnt/storage/jenkinsWS/OpenSpa/testspa8.1/builds/openspa/ustym4kpro/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-extensions-plutotv/1.2+gitAUTOINC+ae3b2dd600-r0/image/usr/lib/enigma2/python/Plugins/Extensions/PlutoTV/PlutoDownload.py", line 159, in getURL
10:30:04.4046 [StackTrace] File: "/usr/lib/python3.8/site-packages/requests/api.py", line 75, in get
10:30:04.4047 [StackTrace] File: "/usr/lib/python3.8/site-packages/requests/api.py", line 61, in request
10:30:04.4047 [StackTrace] File: "/usr/lib/python3.8/site-packages/requests/sessions.py", line 542, in request
10:30:04.4047 [StackTrace] File: "/usr/lib/python3.8/site-packages/requests/sessions.py", line 655, in send
10:30:04.4048 [StackTrace] File: "/usr/lib/python3.8/site-packages/requests/adapters.py", line 439, in send
10:30:04.4048 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 699, in urlopen
10:30:04.4049 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 382, in _make_request
10:30:04.4049 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/connectionpool.py", line 1010, in _validate_conn
10:30:04.4049 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/connection.py", line 353, in connect
10:30:04.4050 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/connection.py", line 169, in _new_conn
10:30:04.4050 [StackTrace] File: "/usr/lib/python3.8/site-packages/urllib3/util/connection.py", line 73, in create_connection
10:30:04.4050 [StackTrace] File: "/usr/lib/python3.8/socket.py", line 918, in getaddrinfo
10:30:04.4051 [StackTrace] ========== Stacktrace end ================================
10:30:05.8576 [Pluto TV] There is no data, it is possible that Puto TV is not available in your Country
10:30:05.8578 Traceback (most recent call last):
10:30:05.8579 File "/mnt/storage/jenkinsWS/OpenSpa/testspa8.1/builds/openspa/ustym4kpro/tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-extensions-plutotv/1.2+gitAUTOINC+ae3b2dd600-r0/image/usr/lib/enigma2/python/Plugins/Extensions/PlutoTV/PlutoDownload.py", line 604, in download
10:30:05.8589 AttributeError: 'DownloadSilent' object has no attribute 'close'
10:30:05.8591 [ePyObject] (PyObject_CallObject(<bound method DownloadSilent.download of <Plugins.Extensions.PlutoTV.PlutoDownload.DownloadSilent object at 0xad65f5e0>>,()) failed)
dmesg
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<5>NFS: Registering the id_resolver key type
<5>Key type id_resolver registered
<5>Key type id_legacy registered
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>Installing knfsd (copyright (C) 1996
[email protected]).
<5>FS-Cache: Netfs 'cifs' registered for caching
<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<7>yaffs: yaffs built Installing.
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>hiahci-phy: registered new sata phy driver
<6>brd: module loaded
<6>loop: module loaded
<6>hifmc100: registerd new interface driver hifmc100.
<5>hifmc100: Found flash memory controller hifmc100.
<6>hifmc100: no found spi-nor device.
<6>hifmc100: no found nand device.
<6>hifmc100: no found spi-nand device.
<6>hieth: /soc/hieth@f9c30000/hieth_phy@0 has invalid PHY address
<6>libphy: himii: probed
<3>mdio_bus himii: /soc/hieth@f9c30000/hieth_phy@0 PHY address 255 is too large
<3>hieth: no dev probed!
<6>libphy: higmac_mii_bus: probed
<6>attached PHY 3 to driver Generic PHY, PHY_ID=0x1cc915
<6>ETH: rgmii, phy_addr=3
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform f9890000.ehci: EHCI Host Controller
<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller
<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
<6>xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver uas
<6>usbcore: registered new interface driver usb-storage
<6>mousedev: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>IR NEC protocol handler initialized
<6>IR RC5(x/sz) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR SANYO protocol handler initialized
<6>IR Sharp protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
<6>IR XMP protocol handler initialized
<6>sp805-wdt f8a2c000.watchdog: registration successful
<4>registered new interface driver himciV2.0_4.4.35_20170401
<6>usb 1-1: new high-speed USB device number 2 using ehci-platform
<6>usb 3-1: new high-speed USB device number 2 using xhci-hcd
<6>hub 1-1:1.0: USB hub found
<6>hub 1-1:1.0: 4 ports detected
<6>mmc0: MAN_BKOPS_EN bit is not set
<6>mmc0: new DDR MMC card at address 0001
<6>mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
<6>mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
<6>mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
<6>usb-storage 3-1:1.0: USB Mass Storage device detected
<6>scsi host0: usb-storage 3-1:1.0
<6>usb 1-2: new high-speed USB device number 3 using ehci-platform
<6>mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
<6> mmcblk0: p1(boot) p2(bootargs) p3(bootoptions) p4(baseparam) p5(pqparam) p6(logo) p7(deviceinfo) p8(softwareinfo) p9(loaderdb) p10(loader) p11(trustedcore) p12(linuxkernel1) p13(linuxkernel2) p14(linuxkernel3) p15(linuxkernel4) p16(userdata)
<5>f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usb 1-1.2: new high-speed USB device number 4 using ehci-platform
<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>usbcore: registered new interface driver snd-usb-audio
<6>oprofile: using timer interrupt.
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<6>Bluetooth: Starting self testing
<6>Bluetooth: ECDH test passed in 21467 usecs
<6>Bluetooth: SMP test passed in 76 usecs
<6>Bluetooth: Finished self testing
<6>ALSA device list:
<6> No soundcards found.
<6>Freeing unused kernel memory: 560K (c0af4000 - c0b80000)
<4>This architecture does not have kernel memory protection.
<6>EXT4-fs (mmcblk0p16): recovery complete
<6>EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
<4>Load hi_media.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
<4>Load hi_mmz.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
<4>virtual device initialization.
<4>Load hi_common.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 26 2018, 14:24:58])
<4>Load hi_pq.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:28])
<4>Load hi_cipher.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:22])
<4>Load hi_hdmi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 30 2019, 15:16:17])
<5>scsi 0:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
<4>hisi hdmi CEC Driver, (c) 2018 Define Technologies
<4>print parent bus[usb], bus_id[3-1:1.0]
<4>allocate index 0 for non sdcard, try again
<4>print parent bus[usb], bus_id[3-1:1.0]
<4>allocate index 1 for usb20, try again
<4>print parent bus[usb], bus_id[3-1:1.0]
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>sd 0:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
<5>sd 0:0:0:0: [sdc] Write Protect is off
<7>sd 0:0:0:0: [sdc] Mode Sense: 28 00 00 00
<3>sd 0:0:0:0: [sdc] No Caching mode page found
<3>sd 0:0:0:0: [sdc] Assuming drive cache: write through
<6> sdc: sdc1
<5>sd 0:0:0:0: [sdc] Attached SCSI disk
<4>Load hi_vou.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 28 2018, 16:48:45])
<4>Load hi_gpio.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:40])
<4>Load hi_gpioi2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:14])
<4>Load hi_i2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:15])
<4>Load hi_tde.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:41])
<4>Load hi_otp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:23])
<4>Load hi_demux.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 26 2018, 18:25:22])
<4>Load hi_adec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:29:59])
<4>Load hi_vfmw.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:53])
<4>Load hi_vpss.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:32:27])
<4>Load hi_vdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:44])
<4>Load hi_adsp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:00])
<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
<4>Load hi_aiao.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 14 2018, 10:00:23])
<4>Load hi_pvr.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:38])
<4>Load hi_tuner.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Nov 7 2022, 12:17:07])
<4>Load hi_keyled.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 27 2019, 19:29:24])
<6>virtual DVB adapter driver, version 1.4, (c) 2010-12 Honza Petrous, SmartImp.cz
<5>vtunerc: registered /dev/misc/vtuner0
<5>vtunerc: registered /dev/misc/vtuner1
<5>vtunerc: registered /dev/misc/vtuner2
<4>hi_dvb: unknown parameter 'hi_vendor' ignored
<4>hi_dvb: unknown parameter 'hi_device' ignored
<6>phi
<6>HI PCIE bridge driver, Copyright (C) 2005-2018 Micronas
<6>DVB: registering new adapter (nHi)
<5>random: nonblocking pool is initialized
<4>si2166 attach success
<6>DVB: registering adapter 0 frontend 0 (Si2166D)...
<6>[hi_dvb_attach_tsport:742 dmx 0,port 32]0 5 1 0 184
<4>u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
<4>si2166 attach success
<6>DVB: registering adapter 0 frontend 0 (Si2166D)...
<6>[hi_dvb_attach_tsport:742 dmx 1,port 33]0 5 1 0 184
<4>u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
<4>atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
<4>[13:57:47:566 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:47:588 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
<4>[13:57:47:820 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:47:842 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
<4>[13:57:48:074 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:48:096 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[1;32mdvb video add event 17 - 7 0
<4>[matbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>[13:57:48:328 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>[1;32mdvb video add event 17 - 7 0
<4>[m
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<4>[13:57:48:553 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<6>[hi_dvb_attach_tsport:742 dmx 2,port 34]0 5 1 0 184
<4>u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
<4>atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
<4>[13:57:48:796 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:48:818 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
<4>[13:57:49:050 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:49:072 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
<4>[13:57:49:304 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:49:326 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>[13:57:49:554 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<4>[1;32mdvb video add event 17 - 7 0
<4>[m
<4>[13:57:49:777 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<6>[hi_dvb_attach_tsport:742 dmx 3,port 35]0 5 1 0 184
<4>u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
<4>atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
<4>[13:57:50:019 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:50:041 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
<4>[13:57:50:273 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:50:295 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
<4>[13:57:50:527 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>[13:57:50:549 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
<4>atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
<4>atbm781x2x3x attach fail!
<3>phi: No HI Demod Found!
<4>[13:57:50:777 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<4>[1;32mdvb video add event 17 - 7 0
<4>[m
<4>[13:57:51:000 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
<4>avl62x1 attach fail!
<3>phi: avl62x1 attach failed!
<4>No this tuner device
<4>u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
<4>Load hi_fb.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Nov 17 2020, 17:37:22])
<4>Mali: Mali device driver loaded
<6>misc hi_dbe: hi_dbe ready
<4>Load hi_jpegdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
<4>Load hi_jpegenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
<4>Load hi_png.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:26])
<4>Load hi_advca.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:01])
<4>Load hi_venc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:48])
<4>Load hi_aenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:04])
<4>Load hi_sci.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 27 2019, 19:29:44])
<4>Load hi_vi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:55])
<4>Load hi_pmoc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Sep 6 2019, 10:59:26])
<6>Registered IR keymap rc-hi3798
<6>input: dreambox advanced remote control as /devices/virtual/rc/rc0/input0
<6>rc0: dreambox advanced remote control as /devices/virtual/rc/rc0
<4>hisi KEYS Driver, (c) 2017 Define Technologies
<6>input: Hisi Front Panel Button Controls as /devices/platform/hisi_keys/input/input1
<4>hisi encoder Driver, (c) 2017 Define Technologies
<6>EXT4-fs (sdc1): recovery complete
<6>EXT4-fs (sdc1): mounted filesystem with writeback data mode. Opts: (null)
<4>[1;32mdvb video add event 17 - 7 0
<4>[m
<4>tntfs: module license 'Commercial. For support email
[email protected].' taints kernel.
<4>Disabling lock debugging due to kernel taint
<6>Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
<6>Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm
<6>Running on kernel 4.4.35 #1 SMP Wed Mar 22 12:22:04 UTC 2023 armv7l
<2>WARNING: Running kernel does not match configured kernel headers the driver was built with! The driver needs to be rebuilt with the correct kernel headers!
<6>SGI XFS with ACLs, security attributes, realtime, no debug enabled
<6>EXT4-fs (mmcblk0p16): re-mounted. Opts: data=ordered
<6>smsusb:smsusb_probe: board id=18, interface number 0
<6>smsmdtv:smscore_init_ir: IR port has not been detected
<6>smsusb:smsusb_probe: Device initialized with return code 0
<3>WARNING: You are using an experimental version of the media stack.
<3> As the driver is backported to an older kernel, it doesn't offer
<3> enough quality for its usage in production.
<3> Use it with care.
<3>Latest git patches (needed if you report a bug to
[email protected]):
<3> 8ed8bba70b4355b1ba029b151ade84475dd12991 media: imx274: remove non-indexed pointers from mode_table
<3> 4eb7846d3ead1c2f461811e41e63462016e19ae7 media: imx274: rename and reorder register address definitions
<3> f067ddad003b67be8acb7fd739172dcfb4817a2a media: imx274: remove unused data from struct imx274_frmfmt
<6>dvbdev: SPA-DVB: registering new adapter (Siano Rio Digital Receiver)
<6>usb 1-1.2: DVB: registering adapter 1 frontend 0 (Siano Mobile Digital MDTV Receiver)...
<6>smsdvb:smsdvb_hotplug: DVB interface registered.
<6>usbcore: registered new interface driver smsusb
<6>usbcore: registered new interface driver rtl8192eu
<4>FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<4>[13:57:54:512 ERROR-HI_PM]:c51_GetWakeUpMode[1297]: wakeup mode err!
<4>proc_vmpeg_0_dst_apply_write 1
<6>[iframe_confirm:190] iframe confirm
<6>
<4>vídeo[0] pronto para ser reproduzido
<6>[iframe_finish:208] acabamento do iframe
<6>
<4> [1;32mdvb vídeo adicionar evento 17 - 7 0
<4> [m
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: o link não está pronto
<6>[iframe_confirm:190] confirmação de iframe
<6>
<6>[iframe_finish:208] acabamento do iframe
<6>
<4>vídeo[0] pronto para ser reproduzido
<4>[13:58:00:747 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Porta = 0 RelPortFrame 0 falhou
<4> [1;32mdvb vídeo adicionar evento 17 - 7 0
<4> [m
<5>vtunerc0: configurando vtype do sintonizador DVB-T
<4>vtunerc0: frontend inicializado como type=4
<6>DVB: registrando adaptador 0 frontend 0 (receptor MDTV)...
<3>vtunerc0: falha ao encontrar o adaptador, adaptador nulo
<4>desligado
<4>lnb desligado
<4>lnb desligado
<4>OPS_si2166_init
<4>@RDA5815M_Inicializar
<4>api->spi_download 0
<4>Opção de construção: Si2183_B60_COMPATIBLE
<6>hi_gmac_v200 f9840000.ethernet eth0: O link está ativo - 1 Gbps/completo - controle de fluxo rx/tx
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link fica pronto
<4> Peça Si2166-D60 executando 'FW_6_1b4'
<4>@si2166_i2c_gate_ctrl
<4>@si2166_i2c_gate_ctrl
<4>@OPS tom diseqc = 0(22K-OFF)
<4>desligado
<4>lnb desligado@si2166_diseqc_set_voltage OFF
<4>@OPS tom diseqc = 0(22K-OFF)
<4>desligado
<4>lnb desligado@si2166_diseqc_set_voltage OFF
<4>desligado
<4>lnb desligado
<4>lnb desligado
<4>OPS_si2166_init
<4>@RDA5815M_Inicializar
<4>api->spi_download 0
<4>Opção de construção: Si2183_B60_COMPATIBLE
<4> Peça Si2166-D60 executando 'FW_6_1b4'
<4>@si2166_i2c_gate_ctrl
<4>@si2166_i2c_gate_ctrl
<4>@OPS tom diseqc = 0(22K-OFF)
<4>desligado
<4>lnb desligado@si2166_diseqc_set_voltage OFF
<4>@OPS tom diseqc = 0(22K-OFF)
<4>desligado
<4>lnb desligado@si2166_diseqc_set_voltage OFF
<4>proc_vmpeg_0_dst_apply_write 00000001
<4>
<4>UDF-fs: aviso (dispositivo mmcblk0p1): udf_fill_super: Nenhuma partição encontrada (2)
<4>UDF-fs: aviso (dispositivo mmcblk0p1): udf_fill_super: Nenhuma partição encontrada (2)
<6>yaffs: dev é 187695105 o nome é "mmcblk0p1" rw
<6>yaffs: sinalizadores passados ""
<7>yaffs: yaffs: Tentativa de montagem MTD de 179.1,"mmcblk0p1"
<7>yaffs: yaffs: dispositivo MTD 1 inválido ou indisponível
<6>yaffs: dev é 187695105 o nome é "mmcblk0p1" rw
<6>yaffs: sinalizadores passados ""
<7>yaffs: yaffs: Tentativa de montagem MTD de 179.1,"mmcblk0p1"
<7>yaffs: yaffs: dispositivo MTD 1 inválido ou indisponível
<6> informações tntfs (dispositivo mmcblk0p1, pid 2326): ntfs_fill_super(): fail_safe está habilitado.
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>melhor ajuste
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>proc_video_videomode_50hz_write [2160p25]
<4>proc_video_videomode_60hz_write [2160p30]
<4>proc_video_videomode_24hz_write [2160p30]
<4>vamos embora
<6>sh(2452): drop_caches: 3
<6>sh(2460): drop_caches: 3
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>(VIC)63 (VIC)64 stStdTiming[h:1152, v:864]
<4>stStdTiming[h:1280, v:720]
<4>stStdTiming[h:1280, v:800]
<4>stStdTiming[h:1280, v:1024]
<4>stStdTiming[h:1440, v:900]
<4>stStdTiming[h:1600, v:900]
<4>stStdTiming[h:1680, v:1050]
<4>stStdTiming[h:1920, v:1080]
<4>@si2166_i2c_gate_ctrl
<4>@si2166_i2c_gate_ctrl
<4>@OPS tom diseqc = 0(22K-OFF)
<4>desligado
<4>lnb desligado@si2166_diseqc_set_voltage OFF
<4>hi_dvb_set_source [dmx: 0, sintonizador: 1, isvtuner: 0]
<6>[hi_dvb_attach_tsport:742 dmx 0,porta 33]0 5 1 0 184
<4>@si2166_diseqc_set_voltage 13V(VERTICAL)
<4>@OPS tom diseqc = 1(22K-ON)
<4>si2166_set_frontend [frequência:2000000,symbol_rate:29900000,is_id:255,pls_code:262143,pls_mode:3,isdbt_sb_segment_idx:0x00000000]
<4>si2166_set_frontend [stream_id:0xffffffff]
<4>fPLL_MHz 0, LPF_KHz 30400
<4>Filter_bw_control_bit = 24
<4>************************************ KLOOP:18******* *************************
<4>fPLL_MHz 2000, LPF_KHz 30400
<4>Filter_bw_control_bit = 24
<4>si2166_set_frontend final em 2000000 levou 106 ms
<4>DmxPcrAcquire 0 -1073058104
<4> Digite DMX_OsiPcrChannelAttachSync 0 0 4325376
<4> [1;32mdvb vídeo adicionar evento 17 - 7 0
<4> [m
<4>áudio[0] pronto para reproduzir
<4>Digite DMX_OsiPcrChannelDetachSync 0 0
<4>DmxPcrAcquire 0 -1073058104
<4> Digite DMX_OsiPcrChannelAttachSync 0 0 4325376
<4>vídeo[0] pronto para ser reproduzido
<4>[00:07:43:480 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Porta = 0 RelPortFrame 0 falhou
<6> [1;32mdvb vídeo adicionar evento 1 - 0 0 1920 1080
<6> [m