Home

Smartreader v2 en Zgemma H9s

jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
alcatel2 dijo:
hola gracias por contestar tan rápido yo conecto el lector en usb3.0 del deco pero no se como mirar si lo reconoce
en linux estoy muy verde
Haz clic para expandir...
Como te he puesto en mi anterior mensaje, vete a addons e instala el USBSERIAL (1.0-R0) de la seccion drivers y reinicia, luego mira en /dev/ si aparece ttyUSB0, en caso de que si, en oscam/Gcam/Ncam o la que vayas a usar, debes poner en device /dev/ttyUSB0

evox dijo:
Ya esta mas que repetido las CCcam 2.31 y 2.32 no tienen soporte para leer card, lo pone clarito en su changelog, en ARM toca usar Oscam.

Salu2.
Haz clic para expandir...
El compañero ha preguntado el como usarlo en el Zgemma y de paso yo le he dicho como se hacia con CCcam (por cierto, al menos CCcam 2.3.2 si reconoce el smargo, no he probado con cards, porque la blanca se que no la lee CCcam directamente). Seria bueno que alguien probara con una gris, por ejemplo. (hay veces que los changelog se equivocan)
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
hola pensé que no era yo tan torpe en esto me equivocaba si soy torpe
bien en oscar.server he puesto
[reader]
label = local
protocol = smartreader
device = SRv2;Serial:12345678
smargopatch = 1
detect = cd
ident = 0100:004106
group = 2
emmcache = 1,3,2
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
me falta algo pues no se ve y el log de oscam
  • 2019/04/20 13:40:32 00000000 s (main) System name = Linux
  • 2019/04/20 13:40:32 00000000 s (main) Host name = zgemmah9s
  • 2019/04/20 13:40:32 00000000 s (main) Release = 4.4.35
  • 2019/04/20 13:40:32 00000000 s (main) Version = #1 SMP Tue Mar 12 12:09:00 CET 2019
  • 2019/04/20 13:40:32 00000000 s (main) Machine = armv7l
  • 2019/04/20 13:40:32 00000000 s (main) Stb model = h9
  • 2019/04/20 13:40:32 00000000 s (main) Stb boxtype = h9
  • 2019/04/20 13:40:32 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1533
  • 2019/04/20 13:40:32 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2019/04/20 13:40:32 00000000 s (main) signal handling initialized
  • 2019/04/20 13:40:32 00000000 s (reader) local [smartreader] creating thread for device SRv2;Serial:12345678
  • 2019/04/20 13:40:32 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2019/04/20 13:40:32 00000000 s (main) waiting for local card init
  • 2019/04/20 13:40:32 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:32 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:32 22BA4178 h (webif) webif: decompressed 178858 bytes back into 440592 bytes
  • 2019/04/20 13:40:32 22BA4178 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
  • 2019/04/20 13:40:34 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:34 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:36 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:36 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:38 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:38 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:40 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:40 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:42 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:42 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:44 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:44 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:46 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:46 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:48 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:48 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:50 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:50 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:52 762579DA r (reader) local [smartreader] Smartreader device Serial:12345678 not found
  • 2019/04/20 13:40:52 762579DA r (reader) local [smartreader] Cannot open device: SRv2;Serial:12345678
  • 2019/04/20 13:40:53 00000000 s (main) init for all local cards done
 
jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
Claro, porque tienes que ponerlo como te he dicho: en device /dev/ttyUSB0

O sea asi:
[reader]
label = local
protocol = smartreader
device = /dev/ttyUSB0
smargopatch = 1
detect = cd
ident = 0100:004106
group = 2
emmcache = 1,3,2

PD: has instalado de addons el driver USBSERIAL (1.0-R0) y despues reiniciado el deco?
 
jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
En OpenSPA boton verde 2 veces --> Drivers --> USBSERIAL (1.0-R0) lo instalas y reinicias
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
ahora el log sale esto


  • 2019/04/20 16:44:24 00000000 s (main) System name = Linux
  • 2019/04/20 16:44:24 00000000 s (main) Host name = zgemmah9s
  • 2019/04/20 16:44:24 00000000 s (main) Release = 4.4.35
  • 2019/04/20 16:44:24 00000000 s (main) Version = #1 SMP Tue Mar 12 12:09:00 CET 2019
  • 2019/04/20 16:44:24 00000000 s (main) Machine = armv7l
  • 2019/04/20 16:44:24 00000000 s (main) Stb model = h9
  • 2019/04/20 16:44:24 00000000 s (main) Stb boxtype = h9
  • 2019/04/20 16:44:24 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1538
  • 2019/04/20 16:44:24 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2019/04/20 16:44:24 00000000 s (main) signal handling initialized
  • 2019/04/20 16:44:24 00000000 s (reader) local [smartreader] creating thread for device SRv2;Serial:12345678
  • 2019/04/20 16:44:24 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2019/04/20 16:44:24 00000000 s (main) waiting for local card init
  • 2019/04/20 16:44:24 67CD2B45 h (webif) webif: decompressed 178858 bytes back into 440592 bytes
  • 2019/04/20 16:44:24 60B54D7F r (reader) local [smartreader] Reader initialized (device=SRv2;Serial:12345678, detect=cd, mhz= AUTO, cardmhz=369)
  • 2019/04/20 16:44:24 67CD2B45 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
  • 2019/04/20 16:44:25 60B54D7F r (reader) local [smartreader] card detected
  • 2019/04/20 16:44:27 60B54D7F r (reader) local [smartreader] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
  • 2019/04/20 16:44:27 60B54D7F r (reader) local [smartreader] CANAL DIGITAAL (NL) recognized
  • 2019/04/20 16:44:27 60B54D7F r (reader) local [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=1 T=0 inv=0 parity=EVEN
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] detect seca/nagra tunneled card
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] Nagra layer found
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] Rom revision: DNASP402 RevL02
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] type: SECA, caid: 0100, serial: xxxxxx, card: Mediaguard v10.0
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] Maturity level [0]= older than 0 years
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [smartreader] found card system seca
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [seca] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [seca] Request provider 1
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [seca] provider 1: 5001, valid: 1, name: DIGITAL+, expiry date: 2019/06/20
  • 2019/04/20 16:44:29 60B54D7F r (reader) local [seca] SA: xxxxxx
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] PBM for provider 1: 7990047400100
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] Request provider 2
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] provider 2: 4106, valid: 1, name: DIGITAL+, expiry date: 2019/06/20
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] SA: 1xxxxxx
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] PBM for provider 2: 8000000000402004
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] Request provider 3
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] provider 3: 4108, valid: 1, name: SPARE, expiry date: 2019/06/20
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] SA: xxxxxxx
  • 2019/04/20 16:44:30 60B54D7F r (reader) local [seca] PBM for provider 3: 8000000000000000
  • 2019/04/20 16:44:31 00000000 s (main) init for all local cards done
  • 2019/04/20 16:44:31 00000000 s (anticasc) anti cascading disabled
  • 2019/04/20 16:44:31 2348E9E4 c (client) plain dvbapi-client granted (dvbapi, au=off)
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_1.20/oscam.ccache
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 0485 PROVID: 004106 PBM: FFFFFFFFFFFFFFF DATE: 5-9-2013
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1810 ECM_PID: 086D PROVID: 000000
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Demuxer 0 found 2 ECMpids and 15 STREAMpids in caPMT
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2019/04/20 16:44:31 2348E9E4 c (dvbapi) Demuxer 0 found 2 ECMpids and 15 STREAMpids in PMT
  • 2019/04/20 16:44:35 2348E9E4 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2019/04/20 16:45:50 2348E9E4 c (-) -- Skipped 14 duplicated log lines --
  • 2019/04/20 16:46:50 2348E9E4 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 16:47:50 2348E9E4 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 16:48:50 2348E9E4 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 16:49:51 2348E9E4 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 16:50:51 2348E9E4 c (-) -- Skipped 12 duplicated log lines --
pero sigue sin verse
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
perdonar por lo novato que soy y el lió que me estoy haciendo
despues de poner en oscam /etc/tuxbox/confg/oscam_1.20 oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label = local
protocol = smartreader
device = SRv2:serial:12345678
smargopatch = 1
detect = cd
ident = 0100:004106
group = 2
emmcache = 1,3,2

no se ve el log es este
  • 2019/04/20 17:11:10 00000000 s (main) System name = Linux
  • 2019/04/20 17:11:10 00000000 s (main) Host name = zgemmah9s
  • 2019/04/20 17:11:10 00000000 s (main) Release = 4.4.35
  • 2019/04/20 17:11:10 00000000 s (main) Version = #1 SMP Tue Mar 12 12:09:00 CET 2019
  • 2019/04/20 17:11:10 00000000 s (main) Machine = armv7l
  • 2019/04/20 17:11:10 00000000 s (main) Stb model = h9
  • 2019/04/20 17:11:10 00000000 s (main) Stb boxtype = h9
  • 2019/04/20 17:11:10 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1539
  • 2019/04/20 17:11:10 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2019/04/20 17:11:10 00000000 s (main) signal handling initialized
  • 2019/04/20 17:11:10 00000000 s (reader) local [smartreader] creating thread for device SRv2:serial:12345678
  • 2019/04/20 17:11:10 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2019/04/20 17:11:10 00000000 s (main) waiting for local card init
  • 2019/04/20 17:11:10 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:10 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:10 61F3E9A9 h (webif) webif: decompressed 178858 bytes back into 440592 bytes
  • 2019/04/20 17:11:10 61F3E9A9 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
  • 2019/04/20 17:11:12 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:12 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:14 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:14 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:16 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:16 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:18 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:18 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:20 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:20 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:22 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:22 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:24 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:24 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:26 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:26 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:28 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:28 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:30 12E0945F r (reader) local [smartreader] Smartreader device SRv2:serial not found
  • 2019/04/20 17:11:30 12E0945F r (reader) local [smartreader] Cannot open device: SRv2:serial:12345678
  • 2019/04/20 17:11:30 00000000 s (main) init for all local cards done
  • 2019/04/20 17:11:30 00000000 s (anticasc) anti cascading disabled
  • 2019/04/20 17:11:30 7E139FA3 c (client) plain dvbapi-client granted (dvbapi, au=off)
  • 2019/04/20 17:11:30 7E139FA3 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_1.20/oscam.ccache
  • 2019/04/20 17:11:30 7E139FA3 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
  • 2019/04/20 17:11:31 7E139FA3 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 049C PROVID: 004106 PBM: FFFFFFFFFFFFFFF DATE: 5-9-2013
  • 2019/04/20 17:11:31 7E139FA3 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1810 ECM_PID: 0884 PROVID: 000000
  • 2019/04/20 17:11:31 7E139FA3 c (dvbapi) Demuxer 0 found 2 ECMpids and 14 STREAMpids in caPMT
  • 2019/04/20 17:11:31 7E139FA3 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2019/04/20 17:11:31 7E139FA3 c (dvbapi) Demuxer 0 found 2 ECMpids and 14 STREAMpids in PMT
  • 2019/04/20 17:11:35 7E139FA3 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
  • 2019/04/20 17:12:50 7E139FA3 c (-) -- Skipped 14 duplicated log lines --
  • 2019/04/20 17:13:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 17:14:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 17:15:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 17:16:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 17:17:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
  • 2019/04/20 17:18:50 7E139FA3 c (-) -- Skipped 12 duplicated log lines --
 
jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
Pero cambia:
device = SRv2:serial:12345678

Por:
device = /dev/ttyUSB0

Pon una captura de tu carpeta /dev/
 
Última edición:
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
bueno compañeros gracias voy a empezar de nuevo ahora tengo un lió que no se como seguir creo que antes a trabajado el lector pero no se como
 
evox

evox

OpenSpa Team
Miembro del equipo
Moderador OpenSPA
2 Mar 2009
5.976
4.390
0
@alcatel2 ojo con los log que pones que salia el nº de serie de tu card, te lo he editado pero ten mas cuidado.

Salu2.
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
log
Status Live Log Config Readers Users Services Files Failban CacheEX Scripts Restart
2019/04/20 18:26:21 00000000 s (main) System name = Linux
2019/04/20 18:26:21 00000000 s (main) Host name = zgemmah9s
2019/04/20 18:26:21 00000000 s (main) Release = 4.4.35
2019/04/20 18:26:21 00000000 s (main) Version = #1 SMP Tue Mar 12 12:09:00 CET 2019
2019/04/20 18:26:21 00000000 s (main) Machine = armv7l
2019/04/20 18:26:21 00000000 s (main) Stb model = h9
2019/04/20 18:26:21 00000000 s (main) Stb boxtype = h9
2019/04/20 18:26:21 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1540
2019/04/20 18:26:21 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2019/04/20 18:26:21 00000000 s (main) signal handling initialized
2019/04/20 18:26:21 00000000 s (reader) local [smartreader] creating thread for device /dev/ttyUSB0
2019/04/20 18:26:21 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2019/04/20 18:26:21 00000000 s (main) waiting for local card init
2019/04/20 18:26:21 6EABC444 h (webif) webif: decompressed 178858 bytes back into 440592 bytes
2019/04/20 18:26:21 6EABC444 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
2019/04/20 18:26:21 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:21 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:23 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:23 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:25 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:25 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:27 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:27 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:29 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:29 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:31 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:31 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:33 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:33 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:35 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:35 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:37 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:37 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:39 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:39 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:41 1F2E6E0B r (reader) local [smartreader] Wrong device format (/dev/ttyUSB0), it should be Device=bus:dev
2019/04/20 18:26:41 1F2E6E0B r (reader) local [smartreader] Cannot open device: /dev/ttyUSB0
2019/04/20 18:26:42 00000000 s (main) init for all local cards done
2019/04/20 18:26:42 00000000 s (anticasc) anti cascading disabled
2019/04/20 18:26:42 75242F11 c (client) plain dvbapi-client granted (dvbapi, au=off)
2019/04/20 18:26:42 75242F11 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam_1.20/oscam.ccache
2019/04/20 18:26:42 75242F11 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
2019/04/20 18:26:43 75242F11 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0100 ECM_PID: 0461 PROVID: 004106 PBM: FFFFFFFFFFFFFFF DATE: 5-9-2013
2019/04/20 18:26:43 75242F11 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1810 ECM_PID: 0849 PROVID: 000000
2019/04/20 18:26:43 75242F11 c (dvbapi) Demuxer 0 found 2 ECMpids and 15 STREAMpids in caPMT
2019/04/20 18:26:43 75242F11 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2019/04/20 18:26:43 75242F11 c (dvbapi) Demuxer 0 found 2 ECMpids and 15 STREAMpids in PMT
2019/04/20 18:26:47 75242F11 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2019/04/20 18:28:02 75242F11 c (-) -- Skipped 14 duplicated log lines --
 
A

alcatel2

Usuario
Amigo OpenSPA
25 Dic 2012
32
1
0
92
no tengo ni idea de log
yo compre este decodificador por económico y no me di cuenta que no tenia lector yo se meter cccam y punto
de linux nada de tajetas nada de lectores nada estoy a puntito de tirar el decodificador
en la carpeta dev si sale ttyUSB0
 
jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
Creo que tienes 1 problema con el formato del smartreader, ponlo asi como yo lo uso:

[reader]
label = smargo
enable = 1
protocol = smargo
device = /dev/ttyUSB0
detect = cd
mhz = 343
cardmhz = 369
group = 2
emmcache = 1,3,2,0

tambien habria que saber desde donde bajaste oscam, por si acaso el binario que tienes, no tubiera los parches/drivers para el lector.
 
jutah

jutah

Usuario
Amigo OpenSPA
29 Ene 2009
96
24
0
alcatel2 dijo:
OK funcionando gracias compañeros
Haz clic para expandir...

Me alegro que te funcione compañero, no olvides que tras tenerlo todo configurado, nunca viene mal guardar una copia de los archivos de configuracion por si acaso.

PD: yo al mio le puse group = 2 como te puse en la config, pero tu puedes ponerle el que necesites, el 1 o el que sea.
 
Debes estar conectado o registrado para responder aquí.
Arriba Pie