Hola,
Tengo una Elite de 1 compañero en Booting.
En YAMON todo bien asta "net init". Cuando lle doy "net init" se queda bloqueada en: "(MAC 00:02:14:13:f8:0c, tx_desc/rx_desc = 16/32)", y no puedo hacer mas nada...
Código:
YAMON> setenv bootserver 192.168.10.102
Updating XENV block at 0x48000000.
.
XENV verification OK.
YAMON> setenv gateway 192.168.10.1
Updating XENV block at 0x48000000.
.
XENV verification OK.
YAMON> setenv ipaddr 192.168.10.103
Updating XENV block at 0x48000000.
.
XENV verification OK.
YAMON> setenv subnetmask 255.255.255.0
Updating XENV block at 0x48000000.
.
XENV verification OK.
YAMON> net init
Ethernet driver for EM86XX (v1.0)
(MAC 00:02:14:13:f8:0c, tx_desc/rx_desc = 16/32)
Así, no tengo ethernet para el "load"....
Alguna sugestión para solucionar?
Nota:
Cuando inicia el log se no hago "CTR+C" se vai a quedar bloquedo en:
"tango2_enet: ethernet driver for SMP863x internal mac "
Algo que estoy intentando es hacer el load con " load asc://tty0":
Info retirada de:
http://www.sankhya.c...oard_usage.html
Código:
Step-3: Give the load command as:
YAMON> load asc://tty0
The following screen is displayed when the "load"
command is entered.
YAMON> load asc://tty0
About to load asc://tty0
Press Ctrl-C to break
Start dump from terminal program
Step-4: There are two ways to download the srecord file.
a) Copy the content of a sample program
s-record file and dump it on the screen.
[img]http://www.azboxhd.es/foro/public/style_emoticons/default/cool.gif[/img] Use "send file" option by pressing CtrlA+Z.
Which will prompt for file types, select ascii
then it asks for location and file name.
After the download is completed, the following message
will be displayed in the screen.
YAMON> load asc://tty0
About to load asc://tty0
Press Ctrl-C to break
Start dump from terminal program
Start = 0xxxxxxxxx, range = (0xxxxxxxxx, 0xxxxxxxxx)
(Prompts the start address and the address range of
the sample program in hexadecimal format)
format = SREC
YAMON>
Step-5: Use go command to run the program:
YAMON> go
Se puede hacer?
Una otra opción seria hacer con que no pille el module ethernet driver, pero no lo sé hacer......
Pienso que el problema es de Hardware
((((((((((