Home

Problema con la lectura la card jsc sport viaccess 4.0

RAMIREX

RAMIREX

Usuario
Amigo OpenSPA
28 Ene 2008
37
0
0
Hola compañeros llevo ya dos semanas configurando newcs para que me lea la card de jsc sport via 4 para compartirla con cccam y poder verla en mi casa del pueblo pero no tengo narices a que lea la card no se donde puede estar el fallo, cuando ejecuto newcs.xml no lee la card la tengo que sacar y volver a entrar para que me de una lectura aun asi no me funciona por favor maestros una ayudita
/camd/OpenXCAS/newcs/newcs -c /camd/Open
XCAS/newcs/newcs.xml


Reading Config file from /camd/OpenXCAS/newcs/newcs.xml
****** INTERNAL enabled
TCP-log password is disabled!
level: internal
type: all
output: console, tcp
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255
tcp port: 1001
[ 14:02:14 ] logger: bind error: error! 125: Address already in use
logger: tcp port open failed, tcp log disabled
[ 14:02:14 ] [ Box detect ] Box type 9
[ 14:02:14 ] [ Config ] Value in <boxkey> for device 0 (upper) is INVALID, skipping...
[ 14:02:14 ] [ Config ] Value in <rsa> for device 0 (upper) is INVALID, skipping...
[ 14:02:14 ] [ Config ] /dev/scard ECM priority: hard
[ 14:02:14 ] [ Config ] No SIDFILTER is configured, disabling SidOverride for device 0 (upper)!
[ 14:02:14 ] [ Newcamd ] Server name : local
[ 14:02:14 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 14:02:14 ] [ Newcamd ] User 2: dummy, Pass: dummy, Host 127.0.0.1, Port: 12000, Au: Off, Spider allowed: No, Sidoverride: No, reader control: No, level: 0
[ 14:02:14 ] [ EMM Cache ] Initialising Cache with 10 entries
[ 14:02:14 ] [ ECM Cache ] Initialising dynamic Cache

[ NewCS ] Process ID is: 1283
[ 14:02:15 ] Calibrating delay loops
[ 14:02:15 ] usleep(5) takes: 0 s 12 us
[ 14:02:15 ] usleep(10) takes: 0 s 16 us
[ 14:02:15 ] usleep(100) takes: 0 s 105 us
[ 14:02:15 ] usleep(500) takes: 0 s 506 us
[ 14:02:15 ] [ Loader ] Reader type 11 on node /dev/scard
[ 14:02:15 ] [ azbox ] Opening device /dev/scard
[ 14:02:15 ] [ azbox ] Could not get device /dev/scard

[ 14:02:16 ] [ azbox ] Could not get device /dev/scard

[ 14:02:17 ] [ azbox ] Could not get device /dev/scard

[ 14:02:18 ] [ azbox ] Could not get device /dev/scard

[ 14:02:19 ] [ azbox ] Could not get device /dev/scard

[ 14:02:20 ] [ azbox ] Could not get device /dev/scard

[ 14:02:21 ] [ azbox ] Could not get device /dev/scard

[ 14:02:22 ] [ azbox ] Could not get device /dev/scard

[ 14:02:23 ] [ azbox ] Could not get device /dev/scard

[ 14:02:24 ] [ azbox ] Could not get device /dev/scard

[ 14:02:25 ] [ Loader ] Reset failed ...

[ 14:02:25 ] [ Loader ] Starting Newcamd Server on port 20000
[ 14:02:25 ] [ NewCS ] Ready to GO! :)
AZBox[~]$ [ 14:02:25 ] [ Card queue /dev/scard ] Starting...
[ 14:02:25 ] bind: error! 125: Address already in use
[ 14:02:25 ] [ Newcamd ] Stopping port 20000
[ 14:02:25 ] [ Loader ] Reader type 11 on node /dev/scard
[ 14:02:25 ] [ azbox ] Opening device /dev/scard
[ 14:02:25 ] [ azbox ] Could not get device /dev/scard

[ 14:02:26 ] [ azbox ] Could not get device /dev/scard

[ 14:02:27 ] [ azbox ] Could not get device /dev/scard

[ 14:02:28 ] [ azbox ] Could not get device /dev/scard

[ 14:02:29 ] [ azbox ] Could not get device /dev/scard

[ 14:02:30 ] [ azbox ] Could not get device /dev/scard

[ 14:02:31 ] [ azbox ] Could not get device /dev/scard

[ 14:02:32 ] [ azbox ] Could not get device /dev/scard

[ 14:02:33 ] [ azbox ] Could not get device /dev/scard

[ 14:02:34 ] [ azbox ] Could not get device /dev/scard

[ 14:02:35 ] [ Loader ] Reset failed ...

[ 14:02:35 ] [ Loader ] Reader type 11 on node /dev/scard
[ 14:02:35 ] [ azbox ] Opening device /dev/scard
[ 14:02:35 ] [ azbox ] Could not get device /dev/scard

[ 14:02:36 ] [ azbox ] Could not get device /dev/scard

[ 14:02:37 ] [ azbox ] Could not get device /dev/scard

[ 14:02:38 ] [ azbox ] Could not get device /dev/scard

[ 14:02:39 ] [ azbox ] Could not get device /dev/scard

[ 14:02:40 ] [ azbox ] Could not get device /dev/scard

[ 14:02:41 ] [ azbox ] Could not get device /dev/scard

[ 14:02:42 ] [ azbox ] Could not get device /dev/scard

[ 14:02:43 ] [ azbox ] Could not get device /dev/scard

[ 14:02:44 ] [ azbox ] Could not get device /dev/scard

[ 14:02:45 ] [ Loader ] Reset failed ...

[ 14:02:45 ] [ Loader ] Reader type 11 on node /dev/scard
[ 14:02:45 ] [ azbox ] Opening device /dev/scard

SCARD_IOC_CHECKCARD: ATR len=12
[ 14:02:47 ] ATR: xxxxxxxxxxxxxxxxxxxxxxxxxx
[ 14:02:47 ] [ CardMan ] Atr header is 3F 77 [INVERSE]
[ 14:02:47 ] [ ATR ] T=0 1etu=31.00us Guardtime:12etu WWT:115200etu
[ 14:02:47 ] [ ATR ] Fi 1 (372) Di 8 (12)
[ 14:02:47 ] [ ATR ] Historical bytes: [C2] z B [02] h [90] [00]
[ 14:02:47 ] [ ATR ] freq 1000000.000 sciFreq 3580000.000
[ 14:02:47 ] [ azbox ] Set card type to 0x500 (mode 2)
[ 14:02:47 ] [ Loader ] Init Viaccess card
[ 14:02:47 ] [ Viaccess ] Sending to Card: CAA4000000
[ 14:02:47 ] [ azbox ] Delay is 8us

[ 14:02:47 ] write: CA A4 00 00 00
[ 14:02:47 ] [ azbox ] Timeout is 997518us

[ 14:02:47 ] read: 90
[ 14:02:47 ] [ azbox ] Timeout is 997518us
[ 14:02:47 ] read: 00
[ 14:02:47 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:47 ] [ Viaccess ] Sending to Card: CAACA40000
[ 14:02:47 ] [ azbox ] Delay is 8us
[ 14:02:47 ] write: CA AC A4 00 00
[ 14:02:47 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAB8000007
[ 14:02:48 ] [ azbox ] Delay is 8us

[ 14:02:48 ] write: CA B8 00 00 07
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: B8
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: A4 05 00 C0 24 34 BE
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 08
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9008
[ 14:02:48 ] [ Keyman ] Adding key C02434BE type 0 on Provider 000000 for caid 0500 ID=0
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAA4000000
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA A4 00 00 00
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAC000001A
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA C0 00 00 1A
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: C0
[ 14:02:48 ] [ azbox ] Timeout is 997518us

[ 14:02:48 ] read: FF F9 20 40 00 00 53 DD 62 F5 00 01 02 FF FF FF
[ 14:02:48 ] read: FF FF FF 09 0A FF FF FF FF 0F
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAACA50000
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA AC A5 00 00
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAB8000006
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA B8 00 00 06
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: B8
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: A5 04 C0 24 34 BE
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 08
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9008
[ 14:02:48 ] [ Keyman ] Adding key C02434BE type 1 on Provider FFF920 for caid 0500 ID=0
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAA4020000
[ 14:02:48 ] [ azbox ] Delay is 8us

[ 14:02:48 ] write: CA A4 02 00 00
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAC000001A
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA C0 00 00 1A
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: C0
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 04 24 08 40 00 3F 53 DD 62 F5 00 01 02 FF FF FF
[ 14:02:48 ] read: FF FF 08 09 0A 0B 0C 0D 0E 0F
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAACA50000
[ 14:02:48 ] [ azbox ] Delay is 8us

[ 14:02:48 ] write: CA AC A5 00 00
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAB8000006
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA B8 00 00 06
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: B8
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: A5 04 C0 24 34 BE
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 08
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9008
[ 14:02:48 ] [ Keyman ] Adding key C02434BE type 1 on Provider 042400 for caid 0500 ID=1
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAA4020000
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA A4 02 00 00
[ 14:02:48 ] [ azbox ] Timeout is 997518us

[ 14:02:48 ] read: 90
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: 00
[ 14:02:48 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:48 ] [ Viaccess ] Sending to Card: CAC000001A
[ 14:02:48 ] [ azbox ] Delay is 8us
[ 14:02:48 ] write: CA C0 00 00 1A
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:48 ] read: C0
[ 14:02:48 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 04 24 10 40 00 3F 53 DD 62 F5 00 01 02 FF FF FF
[ 14:02:49 ] read: FF FF 08 09 0A 0B 0C 0D 0E 0F
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 90
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 00
[ 14:02:49 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:49 ] [ Viaccess ] Sending to Card: CAACA50000
[ 14:02:49 ] [ azbox ] Delay is 8us
[ 14:02:49 ] write: CA AC A5 00 00
[ 14:02:49 ] [ azbox ] Timeout is 997518us

[ 14:02:49 ] read: 90
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 00
[ 14:02:49 ] [ Viaccess ] Status Word from Card: 9000
[ 14:02:49 ] [ Viaccess ] Sending to Card: CAB8000006
[ 14:02:49 ] [ azbox ] Delay is 8us
[ 14:02:49 ] write: CA B8 00 00 06
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: B8
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: A5 04 C0 24 34 BE
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 90
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 08
[ 14:02:49 ] [ Viaccess ] Status Word from Card: 9008
[ 14:02:49 ] [ Keyman ] Adding key C02434BE type 1 on Provider 042410 for caid 0500 ID=2
[ 14:02:49 ] [ Viaccess ] Sending to Card: CAA4020000
[ 14:02:49 ] [ azbox ] Delay is 8us
[ 14:02:49 ] write: CA A4 02 00 00
[ 14:02:49 ] [ azbox ] Timeout is 997518us

[ 14:02:49 ] read: 90
[ 14:02:49 ] [ azbox ] Timeout is 997518us
[ 14:02:49 ] read: 08
[ 14:02:49 ] [ Viaccess ] Status Word from Card: 9008
[ 14:02:49 ] [ 0500 ] Init took: 1.653539
[ 14:02:49 ] [ Loader ] Card 0500 on port /dev/scard ready
 
Maguncia

Maguncia

Usuario Activo
Fan de OpenSPA
3 Abr 2009
145
18
0
Que configuracion estas usando en el newcs.xml.
Saludos
 
oscar_fl

oscar_fl

Hechado .
Loco por OpenSPA
Forero
9 Abr 2009
9.814
3.435
0
Si pon aqui el xlm, pero te aconsejo poner sbox.
 
Solari

Solari

Usuario
Fan de OpenSPA
27 Oct 2009
152
0
0
Hola.

Podrias decirnos a los demas como lo has solucionado ?
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
Solari dijo:
Hola.

Podrias decirnos a los demas como lo has solucionado ?
Haz clic para expandir...

Pues si porque creo que a mi me pasa lo mismo.Mira que me jode la gente que viene buscando ayuda y luego suelta que ya esta solucionado y adios..joder pon la solucion.

Bueno pues eso,a ver si alguien me hecha un cable porque no puedo compartir mi local con mis otras residencias.Dejo aqui el newsc.xml,el cwshare y el mbox.cfg


<?xml version="1.0"?>


<newCSconfig>
<readers name="AZBOX">
<device>

<name>Internal Card Reader</name>


<type>azbox</type>


<mhz>358</mhz>


<node>/dev/scard</node>


<parity>even</parity>


<reset>normal</reset>


<export>Yes</export>


<enabled>Yes</enabled>


<blocksa>No</blocksa>


<blockua>No</blockua>


<blockga>No</blockga>


<boxkey></boxkey>

<rsa></rsa

<crypto-special>No</crypto-special>


<PTShandshake>No</PTShandshake>


<carddetect>yes</carddetect>


<newcamd_port>20000</newcamd_port>


<autosid>yes</autosid>
<sid>
<allow>
</allow>
<deny>
</deny>
</sid>


<Seca-PPV>no</Seca-PPV>


<pincode>0000</pincode>


<priority>round</priority>
</device>
</readers>
<cache>

<emm>20</emm>


<ecm>-1</ecm>
</cache>
<debug>


<darint39>sintoi51</darint39>


<level>internal</level>


<type>all</type>


<output>console,tcp</output>

<logfile>/tmp/newcs.txt</logfile>


<console_options></console_options>

<file_options></file_options>
<udp_host>192.168.1.1XX</udp_host> IP DEL DECO
<udp_port>9000</udp_port>
<udp_options></udp_options>


<tcp_port>1001</tcp_port>


<tcp_options></tcp_options>
</debug>
<newcamdserver>

<enabled>Yes</enabled>


<name>newcs</name>


<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>


<user>

<name>mora</name>


<password>morita</password>


<hostname>127.0.0.1</hostname>


<au>on</au>


<sidoverride>off</sidoverride>


<spider>No</spider>


<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
I: { 3 }
X: { 10 }
O: { 3000 2000 }
X+: { 01004106:30;18100000:30 }

M: { X.dyndns.org { PASS }}

D: XXX

#C: { 192.168.1.130 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 3 } { }
C: { 127.0.0.1 20000 mora morita 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 3 } { 05002400:05002410 }
H: { 05030700 }
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
Aqui dejo mas datos del telnet sobre mi problema:

Trying to connect to newcamd server (127.0.0.1:20000)
Connected to (127.0.0.1:20000) ...
Got card with CaID 0x0500 and 3 number(s) of ProvID (127.0.0
Card: CaID 0x0500 ProvID: 0xFFF920 (127.0.0.1:20000)
Card: CaID 0x0500 ProvID: 0x042400 (127.0.0.1:20000)
Card: CaID 0x0500 ProvID: 0x042410 (127.0.0.1:20000)
Changing 0x05002400 to 0x05002410 (127.0.0.1:20000)
Creating newcamd worker thread for (127.0.0.1:20000) ...

Failed to read network stream or read time-out or server gone
sent sequence id 00B2 , received sequence id 00B2
Closing connection for (127.0.0.1:20000). Server gone offline
Trying to connect to newcamd server (127.0.0.1:20000)
Connected to (127.0.0.1:20000) ...
Got card with CaID 0x0500 and 3 number(s) of ProvID (127.0.0
Card: CaID 0x0500 ProvID: 0xFFF920 (127.0.0.1:20000)
Card: CaID 0x0500 ProvID: 0x042400 (127.0.0.1:20000)
Card: CaID 0x0500 ProvID: 0x042410 (127.0.0.1:20000)
Changing 0x05002400 to 0x05002410 (127.0.0.1:20000)
Creating newcamd worker thread for (127.0.0.1:20000) ...

Failed to read network stream or read time-out or server gone
sent sequence id 00B4 , received sequence id 00B4
Closing connection for (127.0.0.1:20000). Server gone offline
 
oscar_fl

oscar_fl

Hechado .
Loco por OpenSPA
Forero
9 Abr 2009
9.814
3.435
0
As probado los mhz a 500 creo recordar que newcs y card viacces es lo que usa y otra cosa el puerto que usas con mbox que no sea el mismo que newcs, suerte.
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
Nada Oscar cambiada la frecuecia y sigue igual y el puerto es distinto en mbox y newcs,y este ultimo he probado abriendo el puerto por el router y sin abrirlo e idem.Ya no se ni por donde tirar porque creo que esta todo bien,estoy por instalar el firm original al linksys y probar aunque dudo que sea eso (tengo el tomato instalado en un WRT54GL).

No puedo compartir la tarjeta no por newcs ni por sbox,y en cambio por multicas me la leia perfectamente y se actualizo (este ahora lo tengo deshabilitado en OpenXCAS logicamente).
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
Y firm del router cambiado y lo mismo,ya me sale humo de la cabeza.No entiendo porque me conecta (en el MCC me llego a ver en verde) y se desconecta diciendo lo de "server gone offline o reinit cards"
 
ardilla99

ardilla99

VIP surfero
Vip OpenSPA
12 Mar 2009
1.313
116
0
Alpes
La tarjeta misma mencionada la he activado por un año dejandola unas horitas con azbox y Multicas. Cccam nativa es capaz de leerla y también de activarla siempre y cuando el config file este adecuadamente configurada, ahora mismo no te puedo dar detalles pero se trata de abrir los EMM level, dejar que tu deco la active, dejarlo en canal+2...estoy por irme al sobre amigo...y estoy bastante trapo. Busca en foros de cccam y encontraras algo

me olvidaba...si intentas activar tarjeta con Multicas; creo que tenia en el archivo Cardreader.txt el 0 o el 1, no me acuerdo, lo siento...tal vez este archivo sea el jefe para todo y quien le esta fastidiando a newcs...
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
ardilla99 dijo:
La tarjeta misma mencionada la he activado por un año dejandola unas horitas con azbox y Multicas. Cccam nativa es capaz de leerla y también de activarla siempre y cuando el config file este adecuadamente configurada, ahora mismo no te puedo dar detalles pero se trata de abrir los EMM level, dejar que tu deco la active, dejarlo en canal+2...estoy por irme al sobre amigo...y estoy bastante trapo. Busca en foros de cccam y encontraras algo

Me olvidaba...si intentas activar tarjeta con Multicas; creo que tenia en el archivo Cardreader.txt el 0 o el 1, no me acuerdo, lo siento...tal vez este archivo sea el jefe para todo y quien le esta fastidiando a newcs...
Haz clic para expandir...

No no la tarjeta esta activada,lo hice como dices con multicas y dejandolo en el +2 y en minutos ya me aparecia la fecha hasta 2011.El problema es con newcs y sbox que soy incapaz de compartirla.Ambos me leen la tarjeta pero me lo tira atras cuando intenta conectarse al localhost.

Una duda que tengo y que no resulevo por mas que leo es al formar la linea C en en cwshare del mbox... C: { 127.0.0.1 puerto user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 3 } { XXXXXX; }...donde las X son los providers pero eso cada tarjeta lleva el suyo o es general segun plataforma? y como puedo verlo por telnet?.

Necesito ayuda porque por mi solo soy incapaz y por mas que leo no resuelve mi caso,eso si me esta sirviendo para aprender un monton,no hay mal que por bien no venga.
 
oscar_fl

oscar_fl

Hechado .
Loco por OpenSPA
Forero
9 Abr 2009
9.814
3.435
0
Prueba a poner asi la linea
C: { 127.0.0.1 puerto user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 3 } { x8x2:6exx; }

las x las cambias por 1
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
oscar_fl dijo:
Prueba a poner asi la linea
C: { 127.0.0.1 puerto user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 3 } { x8x2:6exx; }

las x las cambias por 1
Haz clic para expandir...

[ 21:34:20 ] [ Loader ] Starting Newcamd Server on port 20000
[ 21:34:20 ] [ NewCS ] Ready to GO! :)
AZBox[newcs]$ [ 21:34:20 ] [ Card queue /dev/scard ] Starting...
[ 21:34:20 ] [ Newcamd:20000 ] rlogin for user dummy fd 8
[ 21:34:20 ] [ Newcamd ] new connection from 127.0.0.1 on socket 9
My sign: A6 76 86 27 6E 41 CB
[ 21:34:20 ] [ Newcamd:20000 ] Connection from 127.0.0.1
[ 21:34:20 ] [ Newcamd:20000 ] got rnd from dummy fd 8
[ 21:34:20 ] [ Newcamd:20000 ] server name to 127.0.0.1:20000.
[ 21:34:20 ] [ Newcamd:20000 ] Can't decrypt client msg, rejecting!
[ 21:34:20 ] [ Newcamd ] Socket 8 hung up
[ 21:34:20 ] [ Newcamd:20000 ] User dummy logout
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
Ahora parece que no se desconecta pero no me abre los canales contratados...port.list?? no tengo,como lo creo?

[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0xFFF92X (127.0.0.1:20000)
[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0x0424XX (127.0.0.1:20000)
[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0x04241X (127.0.0.1:20000)
[23:06:42] [newcamd] Creating newcamd worker thread for (127.0.0.1:20000) ...
OK
[23:08:02]
[23:08:02] [tuner0] ReReading pmt.tmp
[23:08:02] ==================================================================
[23:08:02] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x1918
[23:08:02] ==================================================================
[23:08:06]
[23:08:06] [tuner0] ReReading pmt.tmp
[23:08:06] [tuner0] ReReading pmt.tmp
[23:08:06] ==================================================================
[23:08:06] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x1724
[23:08:06] ==================================================================
[23:08:07]
[23:08:07] [tuner0] ReReading pmt.tmp
[23:08:07] ==========================
[23:08:07] [tuner0] ReReading pmt.tmp
[23:08:07] ==================================================================
[23:08:07] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x165C
 
RAMIREX

RAMIREX

Usuario
Amigo OpenSPA
28 Ene 2008
37
0
0
stevemaster dijo:
Ahora parece que no se desconecta pero no me abre los canales contratados...port.list?? no tengo,como lo creo?

[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0xFFF92X (127.0.0.1:20000)
[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0x0424XX (127.0.0.1:20000)
[23:06:42] [newcamd] Card: CaID 0x0500 ProvID: 0x04241X (127.0.0.1:20000)
[23:06:42] [newcamd] Creating newcamd worker thread for (127.0.0.1:20000) ...
OK
[23:08:02]
[23:08:02] [tuner0] ReReading pmt.tmp
[23:08:02] ==================================================================
[23:08:02] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x1918
[23:08:02] ==================================================================
[23:08:06]
[23:08:06] [tuner0] ReReading pmt.tmp
[23:08:06] [tuner0] ReReading pmt.tmp
[23:08:06] ==================================================================
[23:08:06] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x1724
[23:08:06] ==================================================================
[23:08:07]
[23:08:07] [tuner0] ReReading pmt.tmp
[23:08:07] ==========================
[23:08:07] [tuner0] ReReading pmt.tmp
[23:08:07] ==================================================================
[23:08:07] ECM: CA ID: 0x4AA1 skycrypt/icecrypt -> CA PID: 0x165C
Haz clic para expandir...

hola compi

te recomiendo que utilices sbox es mas facil y no da tantos problemas y dolores de cabeza

un saludo
 
S

stevemaster

Usuario
Amigo OpenSPA
5 Sep 2010
32
0
0
RAMIREX dijo:
hola compi

te recomiendo que utilices sbox es mas facil y no da tantos problemas y dolores de cabeza

un saludo
Haz clic para expandir...

Al final lo hice funcionar pero hice lo que me estas diciendo,quedarme con sbox.
 
Debes estar conectado o registrado para responder aquí.
Arriba Pie