Home

FW [plugin actualización] Reportes de errores al instalar imagen con el Plugin de Actualización

peloto79

Usuario
Amigo OpenSPA
14 Jul 2017
64
20
0
52
Gracias a vosotros
Sabiendo q m da pantallazo al ponerme en oscam updater se salta y ya esta
 

oskur

Usuario
Amigo OpenSPA
26 Ene 2013
59
6
0
Versión de OpenSpa:
openspa 7.3.002 (2018-10-13) Vu+Solo 2

Descripción del fallo:
Al ver canales por IPTV pasados unos segundos empiezan a parpadear, como si faltara memoria o algo asi, o no cargara el buffer.
(Esto solo sucede con los canales IPTV)

Características especiales:
primera ves que se me presenta esta incidencia. con las imagenes anteriores sin ningun problema.

Se adjunta Crash-log: Si/ No
no existe crash


de antemano gracias.
 

JR

OpenSPA Team
Miembro del equipo
Admin OpenSPA
10 Ago 2007
23.255
15.928
0
En pleno Delta
Versión de OpenSpa:
openspa 7.3.002 (2018-10-13) Vu+Solo 2

Descripción del fallo:
Al ver canales por IPTV pasados unos segundos empiezan a parpadear, como si faltara memoria o algo asi, o no cargara el buffer.
(Esto solo sucede con los canales IPTV)

Características especiales:
primera ves que se me presenta esta incidencia. con las imagenes anteriores sin ningun problema.

Se adjunta Crash-log: Si/ No
no existe crash


de antemano gracias.
Y qué pinta esto aquí? No sería mejor abrir un hilo nuevo?
 

vcp_ai

Usuario
Fan de OpenSPA
4 May 2009
195
16
0
67
Valencia
Buen año a TODOS:)
Edision NINO (todas las versiones que ha tenido)
En este equipo tengo instalado un USB WiFi que uso para mejorar la señal que me llega , con un alargador USB de 2m.
Pues bien, la utilidad de flash online parece que no guarda la configuración de seguridad (ssid, tipo de codificación y clave) de ésta conexión.
Si que guarda la configuración IP estática que usa, y que éste es el adaptador por defecto.
Como arranca sin red, no termina la instalación de plugins , skins, etc.
El resto de configuraciones las restaura estupendamente.....
Es una configuración particular, pero si pudieseis mirarlo, me vendría muy bien...
 

evox

OpenSpa Team
Miembro del equipo
Moderador OpenSPA
2 Mar 2009
5.974
4.388
0
Buen año a TODOS:)
Edision NINO (todas las versiones que ha tenido)
En este equipo tengo instalado un USB WiFi que uso para mejorar la señal que me llega , con un alargador USB de 2m.
Pues bien, la utilidad de flash online parece que no guarda la configuración de seguridad (ssid, tipo de codificación y clave) de ésta conexión.
Si que guarda la configuración IP estática que usa, y que éste es el adaptador por defecto.
Como arranca sin red, no termina la instalación de plugins , skins, etc.
El resto de configuraciones las restaura estupendamente.....
Es una configuración particular, pero si pudieseis mirarlo, me vendría muy bien...
Gracias por el reporte lo miraremos, una pregunta para ese usb wifi necesitas instalar los drivers o ya te lo detecta directamente, porque si has de instalar drivers estaras en las mismas y ahi no podemos hacer nada.

Salu2.
 

vcp_ai

Usuario
Fan de OpenSPA
4 May 2009
195
16
0
67
Valencia
Gracias por el reporte lo miraremos, una pregunta para ese usb wifi necesitas instalar los drivers o ya te lo detecta directamente, porque si has de instalar drivers estaras en las mismas y ahi no podemos hacer nada.

Salu2.
Hola, lo detecta directamente como RALINK, y lo restaura directamente como adaptador por defecto, y le asigna correctmente la IP.
Lo que no le asigna son los parametros de la WLAN.
- Resaltar que el NINO ya tiene otro adaptador WLAN interno (que no uso), por si tiene algo que ver.....
 

Jaume2971

Usuario Destacado
Fan de OpenSPA
15 Ago 2018
293
34
0
61
En zgemma h7s la v007 va perfecta en actualización online
Sólo he detectado pixelaciones en bein la liga y todo el trasponder ... ojo SOLO cuando está grabando otro canal HD ... como si el sintonizador no cogiera bien el canal de visionado
Salut
 
Última edición:

sakymare

Usuario Destacado
Loco por OpenSPA
Fan de OpenSPA
30 Ago 2018
511
77
0
54
He actualizado a 7.3.010 y se me ha quedado la imagen congelada. Saben porque?
La actualización se ha esco online como siempre. Las diferencia es que los pasos son diferentes á los anteriores. En la actualización me refiero.
Después de actualizar me ha aparecido directamente en el canal que estaba viendo pero con el Osacam descativado.No me ha pedido como en otras ocasiones el idioma y la recuperación.Algo raro pero pienso que así será la nueva actualización. Lo dejare un poco mas y si no instalación limpia.Que putada. Tengo echo un a copia de seguridad pero no se como acceder a ella. Voy a investigar
 
Última edición:

sakymare

Usuario Destacado
Loco por OpenSPA
Fan de OpenSPA
30 Ago 2018
511
77
0
54
En el pendrive tengo la copia de seguridad vieja pero no se como volver a ella si tengo la imagen congelada. Lo hice hace una semana pero no no se como reinstalarlo.Tengo acceso al deco a traves de Pc. pero me he quedado ahí.(Tengo vu+Zero 4k)
Ayuda porfavor
 

sakymare

Usuario Destacado
Loco por OpenSPA
Fan de OpenSPA
30 Ago 2018
511
77
0
54
Bueno he tenido que hacer una instalacion limpia con un pendrive nuevo y una vez que la instalación estaba hecha he reiniciado y he vuelto a poner el pen antiguo y restablecer el backup. Un poco complicado pero ha dado resultado.
 

PacoUDS23

Usuario
Amigo OpenSPA
21 Ago 2018
85
33
0
43
Salamanca
A mí no se me ha congelado, pero me ha saltado un pantallazo azul mientras estaba restaurando los plugins y ahora no sé si se han instalado todos o no. umm? Parece que los ajustes, al menos, sí que están como yo los tenía.

Por otra parte, en mi modelo de deco, ha habido varias actualizaciones, que al ir a actualizar, en el changelog me ponía que era obligatorio actualizar por usb y no online. Esta vez no ha salido ningún changelog, se ha actualizado directamente. No sé si será un fallo o no, pero creo que es conveniente que se muestre la lista de cambios antes de que empiece el proceso de instalación.
 

SAT1962

Usuario Destacado
Loco por OpenSPA
6 May 2017
944
358
0
A mí no se me ha congelado, pero me ha saltado un pantallazo azul mientras estaba restaurando los plugins y ahora no sé si se han instalado todos o no. umm? Parece que los ajustes, al menos, sí que están como yo los tenía.

Por otra parte, en mi modelo de deco, ha habido varias actualizaciones, que al ir a actualizar, en el changelog me ponía que era obligatorio actualizar por usb y no online. Esta vez no ha salido ningún changelog, se ha actualizado directamente. No sé si será un fallo o no, pero creo que es conveniente que se muestre la lista de cambios antes de que empiece el proceso de instalación.

A mi tambien me ha dado pantallazo azul, cuando iba a restaurar los plugins. Mi deco es un VU+ UNO 4K SE.
 

SAT1962

Usuario Destacado
Loco por OpenSPA
6 May 2017
944
358
0
Si supiera como poder sacarlo, en un deco que esta con pantallazo azul y se reinicia, lo pondria. Lo digo sin acritud, es por desconocimiento del tema. Solo expongo lo que ha pasado.
 

evox

OpenSpa Team
Miembro del equipo
Moderador OpenSPA
2 Mar 2009
5.974
4.388
0
Si supiera como poder sacarlo, en un deco que esta con pantallazo azul y se reinicia, lo pondria. Lo digo sin acritud, es por desconocimiento del tema. Solo expongo lo que ha pasado.

Archivos crashlog... que se alojan en la ruta home/root/logs. Podeis subirlos a plastebin o si los pegais en un post ke sea dentro de un spoiler.

Tambien seria bueno que pusieseis desde que version de Openspa habeis actualizado y si hay dudas con algunas opciones poner una captura de esa pantalla para no ir a ciegas.

Salu2.
 

SAT1962

Usuario Destacado
Loco por OpenSPA
6 May 2017
944
358
0
Archivos crashlog... que se alojan en la ruta home/root/logs. Podeis subirlos a plastebin o si los pegais en un post ke sea dentro de un spoiler.

Tambien seria bueno que pusieseis desde que version de Openspa habeis actualizado y si hay dudas con algunas opciones poner una captura de esa pantalla para no ir a ciegas.

Salu2.

Desde la 7.3.009 a la 7.3.010
Justo cuando actualiza los plugins, se sale y pantallazo azul con el consiguiente reincio.
openSPA Enigma2 crash log

crashdate=sáb jul 6 15:50:08 2019
compiledate=Jul 6 2019
skin=MetrixJRSD/skin.xml
sourcedate=2019-07-05
branch=master
rev=13388c1
component=Enigma2

stbmodel=uno4kse
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m
nimsockets=NIM Socket 0:
imageversion=box_type=vuuno4kse
imageissue=Welcome to openSPA for %h


thon2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] [eBatch] retval=0, cmds left=5, data:
15:48:32.1130 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-]
15:48:32.1132 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:32.1136 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:32.1756 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] [eBatch] retval=0, cmds left=4, data:
15:48:32.1761 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] Deconfiguring network interfaces... ifdown: interface eth0 not configured
15:48:32.1765 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] done.
15:48:32.1769 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-]
15:48:32.1770 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:32.1775 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:32.1951 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] [eBatch] retval=0, cmds left=3, data:
15:48:32.1956 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-]
15:48:32.1958 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:32.1962 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:32.2080 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-] [eBatch] retval=0, cmds left=2, data:
15:48:32.2085 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:32+0200 [-]
15:48:32.2086 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:32.2090 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:45.0170 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [eBatch] retval=0, cmds left=1, data:
15:48:45.0175 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] Configuring network interfaces... done.
15:48:45.0179 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-]
15:48:45.0180 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:45.0185 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:45.0853 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [eBatch] retval=0, cmds left=0, data:
15:48:45.0858 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
15:48:45.0862 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] ...done.
15:48:45.0865 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-]
15:48:45.0869 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:45.0874 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:45.1036 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:45.1041 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:45.1195 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] 0.0.0.0
15:48:45.1202 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] 192.168
15:48:45.1226 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] SerienRecorder plugin not found
15:48:45.1232 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] EPG Refresh Plugin not found
15:48:45.1243 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [OpenWebif] no plugins to load
15:48:45.1253 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] Site starting on 80
15:48:45.1258 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] Starting factory <twisted.web.server.Site instance at 0x8d8e8c38>
15:48:45.1265 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [OpenWebif] started on 80
15:48:45.1267 [ E ] base/e2avahi.cpp:126 avahi_service_try_register [Avahi] Not running yet, cannot register type _http._tcp.

15:48:45.1284 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SCREENNAME] ['Console_summary', 'SimpleSummary']
15:48:45.1297 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 38(16)
15:48:45.1301 [ ] dvb/dvbtime.cpp:378 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
15:48:45.1310 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SCREENNAME] Console
15:48:45.1324 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SOFTWARE MANAGER] update package list
15:48:45.1325 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:45.1341 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SKIN] Parsing embedded skin <embedded-in-'installedPlugins'>
15:48:45.1354 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SKIN] processing screen <embedded-in-'installedPlugins'>:
15:48:45.1382 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SKIN] processing screen SimpleSummary:
15:48:45.1516 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SCREENNAME] ['installedPlugins_summary', 'SimpleSummary']
15:48:45.1541 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:45+0200 [-] [SCREENNAME] installedPlugins
15:48:47.1484 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] [SOFTWARE MANAGER] read installed package list
15:48:47.1485 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:47.1490 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 39(16)
15:48:47.2587 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] [SKIN] processing screen MessageBox:
15:48:47.2635 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] component with name 'WarningPixmap' was not found in skin of screen 'MessageBox'!
15:48:47.2760 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] [SKIN] processing screen MessageBox_summary:
15:48:47.2868 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] [SCREENNAME] ['MessageBox_summary', 'SimpleSummary']
15:48:47.2889 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:47+0200 [-] [SCREENNAME] ['MessageBox']
15:48:47.2893 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 39(16)
15:48:53.5604 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
15:48:53.5614 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [ActionMap] MsgBoxActions ok
15:48:53.5631 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SCREENNAME] ['installedPlugins_summary', 'SimpleSummary']
15:48:53.5646 [ ] dvb/dvbtime.cpp:378 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
15:48:53.5652 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SCREENNAME] installedPlugins
15:48:53.5661 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: cam-ncam+-armv7
15:48:53.5665 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: cam-oscam-modern-armv7
15:48:53.5669 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-extensions-ncaminfo
15:48:53.5673 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-extensions-panelextra
15:48:53.5677 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-extensions-spaqbutton
15:48:53.5682 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-extensions-spzimdb
15:48:53.5686 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-extensions-spzweather
15:48:53.5690 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-skins-metrixjr1080
15:48:53.5693 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-skins-openplus
15:48:53.5697 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-systemplugins-aspectratioswitch
15:48:53.5701 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SOFTWARE MANAGER] Plugin to restore: enigma2-plugin-systemplugins-fixbackup
15:48:53.5712 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SKIN] processing screen RestorePlugins:
15:48:53.5856 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SKIN] processing screen SimpleSummary:
15:48:53.5964 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SCREENNAME] ['RestorePlugins_summary', 'SimpleSummary']
15:48:53.5986 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:53+0200 [-] [SCREENNAME] RestorePlugins
15:48:53.8968 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
15:48:57.2788 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 18f 1
15:48:57.2796 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] [ActionMap] ColorActions green
15:48:57.6939 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] [SKIN] processing screen Console:
15:48:57.7073 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] Console: executing in run 0 the command: opkg install cam-ncam+-armv7 cam-oscam-modern-armv7 enigma2-plugin-extensions-ncaminfo enigma2-plugin-extensions-panelextra enigma2-plugin-extensions-spaqbutton enigma2-plugin-extensions-spzimdb enigma2-plugin-extensions-spzweather enigma2-plugin-skins-metrixjr1080 enigma2-plugin-skins-openplus enigma2-plugin-systemplugins-aspectratioswitch enigma2-plugin-systemplugins-fixbackup
15:48:57.7074 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
15:48:57.7101 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] [SKIN] processing screen SimpleSummary:
15:48:57.7242 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] [SCREENNAME] ['Console_summary', 'SimpleSummary']
15:48:57.7268 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:48:57+0200 [-] [SCREENNAME] Console
15:48:57.7273 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 18f 1
15:49:13.1186 [ ] base/ebase.cpp:279 processOneEvent [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 39(16)
15:50:08.0301 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
15:50:08.0309 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [ActionMap] WizardActions ok
15:50:08.0326 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] ['RestorePlugins_summary', 'SimpleSummary']
15:50:08.0345 [ ] dvb/dvbtime.cpp:378 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
15:50:08.0359 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] ['installedPlugins_summary', 'SimpleSummary']
15:50:08.0373 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] RestorePlugins
15:50:08.0406 [ ] dvb/dvbtime.cpp:378 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
15:50:08.0416 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] installedPlugins
15:50:08.0445 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] ['Console_summary', 'SimpleSummary']
15:50:08.0469 [ ] dvb/dvbtime.cpp:378 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
15:50:08.0481 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] [SCREENNAME] Console
15:50:08.0496 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] Traceback (most recent call last):
15:50:08.0500 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] File "/usr/lib/enigma2/python/mytest.py", line 284, in processDelay
15:50:08.0517 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] callback(*retval)
15:50:08.0521 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] File "/usr/lib/enigma2/python/Plugins/SystemPlugins/SoftwareManager/BackupRestore.py", line 504, in userRestoreScript
15:50:08.0529 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-07-06 15:50:08+0200 [-] AttributeError: 'RestoreScreen' object has no attribute 'restoreMetrixSkin'
15:50:08.0546 [ E ] python/python.cpp:211 call [ePyObject] (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x9167ed00>>,()) failed)


dmesg

<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sat Apr 13 11:40:15 CEST 2019
<6>[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[ 0.000000] Machine model: UNO4KSE
<6>[ 0.000000] moving dtb from 0x0000000007628000 to 0x00000000009a3fb8
<6>[ 0.000000] bmem: Reserved 641 MiB at 0x0000000015e00000
<6>[ 0.000000] bmem: Reserved 641 MiB at 0x0000000097e00000
<6>[ 0.000000] cma: Reserved 16 MiB at 0x0000000096c00000
<4>[ 0.000000] Forcing write-allocate cache policy for SMP
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 516096
<7>[ 0.000000] DMA zone: 684 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 87552 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 428544 pages, LIFO batch:31
<6>[ 0.000000] PERCPU: Embedded 12 pages/cpu @d45ac000 s16844 r8192 d24116 u49152
<7>[ 0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515412
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 707416K/2064384K available (6740K kernel code, 326K rwdata, 2228K rodata, 316K init, 215K bss, 1340584K reserved, 16384K cma-reserved, 383972K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xd5800000 - 0xff000000 ( 664 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd5600000 ( 342 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc08ca654 (8970 kB)
<5>[ 0.000000] .init : 0xc08cb000 - 0xc091a000 ( 316 kB)
<5>[ 0.000000] .data : 0xc091a000 - 0xc096ba38 ( 327 kB)
<5>[ 0.000000] .bss : 0xc096e000 - 0xc09a3fb8 ( 216 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5802000, parent irq: 93)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5808000, parent irq: 64)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580aa00, parent irq: 65)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580c640, parent irq: 95)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580e200, parent irq: 58)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd5810380, parent IRQ(s): 3)
<6>[ 0.000000] MCP: Enabling write pairing
<6>[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000011] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000361] Console: colour dummy device 80x30
<6>[ 0.000378] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000386] pid_max: default: 32768 minimum: 301
<6>[ 0.000486] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000965] CPU: Testing write buffer coherency: ok
<6>[ 0.001137] CPU0: update cpu_capacity 1024
<6>[ 0.001144] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001342] Setting up static identity map for 0x8480 - 0x84d8
<6>[ 0.004110] CPU1: update cpu_capacity 1024
<6>[ 0.004113] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.004171] Brought up 2 CPUs
<6>[ 0.004183] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.004188] CPU: All CPU(s) started in SVC mode.
<6>[ 0.004515] devtmpfs: initialized
<6>[ 0.013790] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[ 0.014012] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.015381] NET: Registered protocol family 16
<6>[ 0.016805] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[ 0.022168] cpuidle: using governor ladder
<6>[ 0.031179] cpuidle: using governor menu
<6>[ 0.038248] No ATAGs?
<6>[ 0.038276] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.038282] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ 0.038488] Broadcom Brahma-B15 readahead cache at: 0xd5b14478
<6>[ 0.052688] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
<6>[ 0.052875] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
<5>[ 0.053214] SCSI subsystem initialized
<7>[ 0.054477] libata version 3.00 loaded.
<6>[ 0.054711] usbcore: registered new interface driver usbfs
<6>[ 0.054759] usbcore: registered new interface driver hub
<6>[ 0.054806] usbcore: registered new device driver usb
<6>[ 0.054883] Linux video capture interface: v2.00
<6>[ 0.054965] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.054970] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
<6>[ 0.054991] PTP clock support registered
<6>[ 0.055597] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.056730] Switched to clocksource arch_sys_counter
<5>[ 0.056917] FS-Cache: Loaded
<4>[ 0.062295] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[ 0.062399] NET: Registered protocol family 2
<6>[ 0.062780] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.062803] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.062842] TCP: Hash tables configured (established 4096 bind 4096)
<6>[ 0.062884] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.062896] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.062995] NET: Registered protocol family 1
<6>[ 0.063176] RPC: Registered named UNIX socket transport module.
<6>[ 0.063181] RPC: Registered udp transport module.
<6>[ 0.063184] RPC: Registered tcp transport module.
<6>[ 0.063187] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.063200] PCI: CLS 0 bytes, default 64
<4>[ 0.063514] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[ 0.063544] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.064488] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[ 0.065474] NFS: Registering the id_resolver key type
<5>[ 0.065495] Key type id_resolver registered
<5>[ 0.065498] Key type id_legacy registered
<6>[ 0.065510] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.065518] Installing knfsd (copyright (C) 1996 [email protected]).
<5>[ 0.065663] FS-Cache: Netfs 'cifs' registered for caching
<5>[ 0.065702] Key type cifs.spnego registered
<6>[ 0.065854] fuse init (API version 7.23)
<6>[ 0.066780] bounce: pool size: 64 pages
<6>[ 0.066825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 0.066835] io scheduler noop registered
<6>[ 0.066842] io scheduler deadline registered
<6>[ 0.066853] io scheduler cfq registered (default)
<6>[ 0.067128] brcm-gisb-arb f0400000.gisb-arb: registered mem: d5b3c000, irqs: 261, 262
<6>[ 0.067915] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
<6>[ 0.068302] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>[ 0.068349] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
<6>[ 0.168486] brcm-pci f0460000.pcie: link down
<6>[ 0.168534] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
<4>[ 0.168575] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
<6>[ 0.268708] brcm-pci f0490000.pcie: link down
<6>[ 0.270066] brcmstb_memc f1102000.memc-ddr: registered
<6>[ 0.270107] brcmstb_memc f1182000.memc-ddr: registered
<6>[ 0.270296] brcm-waketimer f0417580.waketimer: registered, with irq 263
<6>[ 0.270515] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.271604] console [ttyS0] disabled
<6>[ 0.271630] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
<6>[ 1.020636] console [ttyS0] enabled
<6>[ 1.024515] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
<6>[ 1.033794] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
<6>[ 1.046142] loop: module loaded
<6>[ 1.050160] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
<6>[ 1.056725] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
<6>[ 1.063298] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[ 1.070712] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
<6>[ 1.076755] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[ 1.094748] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
<6>[ 1.103730] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 1.113420] scsi host0: brcm-ahci
<6>[ 1.116990] scsi host1: brcm-ahci
<6>[ 1.120471] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
<6>[ 1.128404] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
<6>[ 1.136342] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[ 1.143485] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
<3>[ 1.149124] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
<4>[ 1.155160] brcmstb_qspi: probe of f03e3400.spi failed with error -22
<6>[ 1.161639] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
<4>[ 1.167801] m25p80 spi32766.0: found mx25l3255e, expected m25p80
<6>[ 1.173831] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
<5>[ 1.179094] 5 ofpart partitions found on MTD device spi32766.0
<5>[ 1.184938] Creating 5 MTD partitions on "spi32766.0":
<5>[ 1.190091] 0x000000000000-0x000000200000 : "flash0.bolt"
<5>[ 1.196030] 0x000000200000-0x000000210000 : "flash0.macadr"
<5>[ 1.202054] 0x000000210000-0x000000220000 : "flash0.nvram"
<5>[ 1.207999] 0x000000220000-0x000000230000 : "flash0.devtree"
<5>[ 1.214092] 0x000000000000-0x000000400000 : "flash0"
<6>[ 1.220157] libphy: Fixed MDIO Bus: probed
<6>[ 1.224694] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<4>[ 1.230590] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
<6>[ 1.249742] libphy: bcmgenet MII bus: probed
<6>[ 1.274557] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[ 1.280409] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[ 1.286539] xhci-brcm: xHCI BRCM driver
<6>[ 1.305226] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[ 1.311007] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
<6>[ 1.319130] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
<6>[ 1.328039] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
<6>[ 1.334683] hub 1-0:1.0: USB hub found
<3>[ 1.338469] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[ 1.345749] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
<6>[ 1.351513] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
<6>[ 1.359406] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[ 1.367863] hub 2-0:1.0: USB hub found
<6>[ 1.371642] hub 2-0:1.0: 2 ports detected
<6>[ 1.376036] ehci-brcm: EHCI BRCM driver
<6>[ 1.379998] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
<6>[ 1.385782] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
<6>[ 1.403784] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
<6>[ 1.410745] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[ 1.415742] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.416165] hub 3-0:1.0: USB hub found
<6>[ 1.416185] hub 3-0:1.0: 1 port detected
<6>[ 1.416441] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
<6>[ 1.416561] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
<6>[ 1.426695] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
<6>[ 1.431733] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.432187] hub 4-0:1.0: USB hub found
<6>[ 1.432225] hub 4-0:1.0: 1 port detected
<6>[ 1.432551] ohci-brcm: OHCI BRCM driver
<6>[ 1.432649] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
<6>[ 1.432797] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
<6>[ 1.432890] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
<6>[ 1.487296] hub 5-0:1.0: USB hub found
<6>[ 1.487333] hub 5-0:1.0: 1 port detected
<6>[ 1.487582] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
<6>[ 1.487694] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
<6>[ 1.487813] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
<6>[ 1.537150] hub 6-0:1.0: USB hub found
<6>[ 1.540953] hub 6-0:1.0: 1 port detected
<6>[ 1.544909] ata1.00: ATA-10: ST1000LM048-2E7172, SDM1, max UDMA/133
<6>[ 1.545222] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.545234] ehci-pci: EHCI PCI platform driver
<6>[ 1.545287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.545296] ohci-pci: OHCI PCI platform driver
<6>[ 1.545434] usbcore: registered new interface driver usb-storage
<6>[ 1.545637] mousedev: PS/2 mouse device common for all mice
<6>[ 1.582031] i2c /dev entries driver
<6>[ 1.582607] IR NEC protocol handler initialized
<6>[ 1.582611] IR RC5(x/sz) protocol handler initialized
<6>[ 1.582614] IR RC6 protocol handler initialized
<6>[ 1.582619] IR JVC protocol handler initialized
<6>[ 1.582622] IR Sony protocol handler initialized
<6>[ 1.582626] IR SANYO protocol handler initialized
<6>[ 1.582630] IR Sharp protocol handler initialized
<6>[ 1.582634] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.582638] IR XMP protocol handler initialized
<6>[ 1.583289] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[ 1.583900] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
<6>[ 1.584098] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.584099] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.584104] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.585449] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
<6>[ 1.585452] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
<6>[ 1.615772] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[ 1.615934] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.616164] usbcore: registered new interface driver usbhid
<6>[ 1.616166] usbhid: USB HID core driver
<6>[ 1.618807] Initializing XFRM netlink socket
<6>[ 1.638625] NET: Registered protocol family 10
<6>[ 1.644351] NET: Registered protocol family 17
<6>[ 1.644370] NET: Registered protocol family 15
<5>[ 1.644519] Key type dns_resolver registered
<5>[ 1.644612] Registering SWP/SWPB emulation handler
<6>[ 1.651964] ALSA device list:
<6>[ 1.651968] No soundcards found.
<6>[ 1.712376] mmc0: MAN_BKOPS_EN bit is not set
<6>[ 1.718625] mmc0: new high speed MMC card at address 0001
<6>[ 1.718958] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[ 1.719028] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[ 1.719083] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[ 1.719145] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<6>[ 1.722200] mmcblk0: p1 p2 p3 p4
<6>[ 1.740743] usb 3-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.770017] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 1.810201] ata1.00: configured for UDMA/133
<5>[ 1.814702] scsi 0:0:0:0: Direct-Access ATA ST1000LM048-2E71 SDM1 PQ: 0 ANSI: 5
<5>[ 1.823306] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
<5>[ 1.830986] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>[ 1.832785] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.841654] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.846463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.846533] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.872921] sda: sda1
<6>[ 1.875478] usb-storage 3-1:1.0: USB Mass Storage device detected
<5>[ 1.882205] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.886858] scsi host2: usb-storage 3-1:1.0
<6>[ 1.946742] ata2: SATA link down (SStatus 0 SControl 300)
<4>[ 1.954329] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<5>[ 2.893195] scsi 2:0:0:0: Direct-Access BUFFALO USB Flash Disk 4000 PQ: 0 ANSI: 0 CCS
<5>[ 2.902974] sd 2:0:0:0: Attached scsi generic sg1 type 0
<5>[ 2.909160] sd 2:0:0:0: [sdb] 4046848 512-byte logical blocks: (2.07 GB/1.93 GiB)
<5>[ 2.917644] sd 2:0:0:0: [sdb] Write Protect is off
<7>[ 2.922473] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
<3>[ 2.923401] sd 2:0:0:0: [sdb] No Caching mode page found
<3>[ 2.928736] sd 2:0:0:0: [sdb] Assuming drive cache: write through
<6>[ 2.956051] sdb: sdb1
<5>[ 2.961892] sd 2:0:0:0: [sdb] Attached SCSI removable disk
<4>[ 4.837162] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 4.867926] EXT4-fs (mmcblk0p4): 16 orphan inodes deleted
<6>[ 4.873347] EXT4-fs (mmcblk0p4): recovery complete
<6>[ 4.890973] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
<6>[ 4.899899] VFS: Mounted root (ext4 filesystem) on device 179:4.
<6>[ 4.906367] devtmpfs: mounted
<6>[ 4.909490] Freeing unused kernel memory: 316K (c08cb000 - c091a000)
<5>[ 5.825099] random: nonblocking pool is initialized
<6>[ 6.091824] EXT4-fs (sda1): recovery complete
<6>[ 6.124445] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 6.520102] EXT4-fs (sdb1): recovery complete
<6>[ 6.525148] EXT4-fs (sdb1): mounted filesystem with writeback data mode. Opts: (null)
<6>[ 6.770404] SGI XFS with security attributes, realtime, no debug enabled
<6>[ 7.053678] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
<4>[ 9.323552] procmk_init
<4>[ 9.330020] bcm_event: module license 'Proprietary' taints kernel.
<4>[ 9.336235] Disabling lock debugging due to kernel taint
<6>[ 9.562395] nexus.ko: virtual irq: enabled (273)
<6>[ 9.567078] nexus.ko: shared gpio banks: enabled
<6>[ 12.661981] DVB: registering new adapter (_vuplus_uno4kse_)
<4>[ 12.949403] bcm7252s: hotplug_callback():
<4>[ 12.949403] Hotplug - status.connected 1:0:1
<4>[ 12.956507] bcm7252s: hotplug_callback():
<4>[ 12.956507] Hotplug - connecting HDMI to display 0xe
<6>[ 13.162734] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[ 13.258650] [MPVR]: >> misc_pvr_init
<4>[ 13.273940] [VID]: 6bcm7335_video_init
<4>[ 13.316329] [AUD]: 6bcm7335_audio_init
<4>[ 13.323582] [AUD]: >> bcm_audio_capture_init
<4>[ 13.332122] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d39f9c00 state=cc0d3800 config=bf876d58
<6>[ 13.359636] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.368359] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3ab5800 state=cbd48800 config=bf876d60
<6>[ 13.391742] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.402526] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a71400 state=cbd48000 config=bf876d68
<6>[ 13.430475] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.442155] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a71c00 state=cc0df800 config=bf876d70
<6>[ 13.484806] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.494105] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3aa4400 state=cc0df000 config=bf876d78
<6>[ 13.542066] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.551413] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3aa4c00 state=cc0d3000 config=bf876d80
<6>[ 13.572605] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.585317] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a7c400 state=cc93d800 config=bf876d88
<6>[ 13.614552] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.623020] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=cca3ec00 state=cc3c2800 config=bf876d90
<6>[ 13.647313] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<4>[ 13.655499] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
<4>[ 13.690621] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
<4>[ 13.698756] BKNI_Malloc(linuxkernel) top users:
<4>[ 13.698756] blocks, bytes, filename:line
<4>[ 13.707799] 1102, 237296, BSEAV/lib/utils/balloc.c:31
<6>[ 13.735065] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[ 13.759411] [LCD]: registered
<6>[ 14.371812] [CI]: registered ci0
<6>[ 14.382919] [CI]: CI interface initialised
<6>[ 14.382919]
<6>[ 14.397817] [DFP]: registered dbox fp
<6>[ 14.405237] [SC]: registered sci0
<4>[ 15.865740] system_time_set wakeup mode get
<4>[ 15.929744] system_time_set wakeup mode get 0xc4
<4>[ 16.186078] [VID]: VIDEO_SET_STREAMTYPE 0
<4>[ 16.190252] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 16.194634] [VID]: VIDEO_PLAY 1 2 0
<4>[ 16.206476] [VID]: VIDEO_CONTINUE 1 1
<4>[ 16.210519] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<4>[ 16.486291] [VID]: VIDEO_STOP 0 1
<4>[ 16.490685] [VID]: VIDEO_SELECT_SOURCE 0 0
<6>[ 18.646736] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[ 18.655956] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[ 18.663169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 20.659837] bcmgenet f0b00000.ethernet eth0: Link is Down
<6>[ 22.051343] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
<6>[ 22.059597] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[ 26.546480] Bluetooth: Core ver 2.20
<6>[ 26.550201] NET: Registered protocol family 31
<6>[ 26.554685] Bluetooth: HCI device and connection manager initialized
<6>[ 26.561094] Bluetooth: HCI socket layer initialized
<6>[ 26.566018] Bluetooth: L2CAP socket layer initialized
<6>[ 26.571133] Bluetooth: SCO socket layer initialized
<4>[ 29.002956] [VID]: VIDEO_SET_STREAMTYPE 0
<4>[ 29.007106] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 29.013586] [VID]: VIDEO_PLAY 1 2 0
<4>[ 29.022471] [VID]: VIDEO_CONTINUE 1 1
<4>[ 29.026567] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<4>[ 29.303020] [VID]: VIDEO_STOP 0 1
<4>[ 29.307449] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 33.155667] [AUD]: AUDIO_SET_MUTE 0
<4>[ 33.255714] [AUD]: AUDIO_SET_MIXER -877887856
<4>[ 33.260204] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[ 33.265278] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[ 33.271916] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<6>[ 37.185189] sh (2216): drop_caches: 3
<6>[ 37.688309] sh (2226): drop_caches: 3
<4>[ 38.237813] [AUD]: AUDIO_SET_MIXER -877887856
<4>[ 38.242300] [AUD]: AUDIO_SET_MIXER : amixl 32, amixr 32
<4>[ 38.247575] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 38.254568] [AUD]: AUDIO_SET_MIXER : next left volume -2355, right volume -2355
<6>[ 43.693842] bcmgenet f0b00000.ethernet eth0: Link is Down
<6>[ 45.151770] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
 

JR

OpenSPA Team
Miembro del equipo
Admin OpenSPA
10 Ago 2007
23.255
15.928
0
En pleno Delta
Os hacéis backup de plugins?? Está claro que es una opción que ofrece e2, pero vamos, que siempre hemos recomendado no actualizarlos, es más, quitamos esa opción del spanewfirm hace tiempo.

Ahora la pregunta, ese backup y restauración lo habéis hecho con el Asistente de actualización OpenSPA??
 
  • Me gusta
Reactions: Unomasdos

SAT1962

Usuario Destacado
Loco por OpenSPA
6 May 2017
944
358
0
Os hacéis backup de plugins?? Está claro que es una opción que ofrece e2, pero vamos, que siempre hemos recomendado no actualizarlos, es más, quitamos esa opción del spanewfirm hace tiempo.

Ahora la pregunta, ese backup y restauración lo habéis hecho con el Asistente de actualización OpenSPA??

Yo siempre lo hago haciendo backup y restaurando usando el asistente de actualizacion, salvo cuando se especifica que hay que hacerlo desde cero por cambio de kernel o algo asi. Nunca he tenido problemas haciéndolo asi.
 

JR

OpenSPA Team
Miembro del equipo
Admin OpenSPA
10 Ago 2007
23.255
15.928
0
En pleno Delta
Yo siempre lo hago haciendo backup y restaurando usando el asistente de actualizacion, salvo cuando se especifica que hay que hacerlo desde cero por cambio de kernel o algo asi. Nunca he tenido problemas haciéndolo asi.
A ver, que no te pillo, con el Asistente OpenSPA no se hace copia de plugins, solo listas de canales, picons, camd y configuraciones. Después de actualizar, cuando arranca el firm lo primero que hace es entrar en el wizard de idiomas, donde escoges el tuyo, y luego sale la pantalla del spanewfirm (Asistente de actualización OpenSPA)

1562425170396.png

Esto solo restaura lo que te he puesto arriba, luego te salta la instalación de plugins OpenSPA.

De todas formas, si quieres volver a probar, sube este archivo que adjunto en : /usr/lib/enigma2/python/Plugins/SystemPlugins/SoftwareManager

La forma de hacerlo sería reinstalar el firm, y cuando esté en el wizard de idiomas, entrar por ftp, subir el archivo y reiniciar desde telnet (init 4 y luego init 3) u openwebif.
 

Adjuntos

  • BackupRestore.pyo
    39 KB · Visitas: 1