Home

Vu+ Zero 4K Pantallazo azul en "Gestor de dispositivos DVB-USB" [Solucionado]

ghytre

Usuario Activo
Fan de OpenSPA
Amigo OpenSPA
12 Feb 2019
194
251
0
38
Indicar el modelo de receptor que tienes: Vu+ Zero 4K DVB-S2

Versión de OpenSpa: 7.4.003

Descripción del fallo: Al intentar entrar en "Gestor de dispositivos DVB-USB", devuelve pantallazo azul tras unos segundos.

Características especiales: Ninguna

Se adjunta Crash-log:

openSPA Enigma2 crash log

crashdate=dom dic 29 13:51:57 2019
compiledate=Dec 13 2019
skin=BlackSPA/skin.xml
sourcedate=2019-12-13
branch=7.4
rev=50bd40c
component=Enigma2

stbmodel=zero4k
stbmodel=dm8000
kernelcmdline=root=/dev/mmcblk0p7 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
nimsockets=NIM Socket 0:
imageversion=box_type=vuzero4k
imageissue=Welcome to openSPA for %h


:51:49.4802 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.4803 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=314
13:51:49.5496 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.5497 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=315
13:51:49.5824 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.5825 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=355
13:51:49.6057 [ ] dvb/dvbtime.cpp:477 updateTime [eDVBLocalTimerHandler] Transponder time is 29.12.2019 13:51:42
13:51:49.6058 [ ] dvb/dvbtime.cpp:490 updateTime [eDVBLocalTimerHandler] diff is -7
13:51:49.6058 [ ] dvb/dvbtime.cpp:493 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
13:51:49.6059 [ ] dvb/dvbtime.cpp:49 setRTC [eDVBLocalTimerHandler] set RTC Time
13:51:49.7157 [ ] dvb/dvbtime.cpp:563 updateTime [eDVBLocalTimerHandler] update RTC
13:51:49.7158 [ ] dvb/dvbtime.cpp:583 updateTime [eDVBLocalTimerHandler] time update to 13:51:42
13:51:49.7158 [ ] dvb/dvbtime.cpp:586 updateTime [eDVBLocalTimerHandler] m_time_difference is -7
13:51:49.7159 [ ] dvb/dvbtime.cpp:597 updateTime [eDVBLocalTimerHandler] slewing Linux Time by -07 seconds
13:51:49.7166 [ ] dvb/dvb.cpp:2420 getDemux [eDVBChannel] getDemux cap=00
13:51:49.7281 [ ] service/servicedvb.cpp:1747 timeshift [eDVBServicePlay] timeshift
13:51:49.7316 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.7318 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=357
13:51:49.8174 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.8175 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=358
13:51:49.9014 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:49.9016 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=359
13:51:50.0548 [ ] dvb/pmt.cpp:1006 SDTScanEvent [eDVBServicePMTHandler] sdt update done!
13:51:50.6037 [ ] dvb/epgcache.cpp:1628 startEPG [eEPGCache] start caching events(1577627510)
13:51:50.6039 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=211
13:51:50.6042 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=561
13:51:50.6045 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=18
13:51:50.6049 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=18
13:51:50.6057 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=18
13:51:50.6064 [ ] base/huffman.cpp:27 huffman_read_dictionary [huffman] read.. '/usr/share/enigma2/otv_0ce40000_0053_0068.dict'
13:51:50.6065 [ ] dvb/epgcache.cpp:1831 startEPG [eEPGCache] abort non avail OpenTV EIT reading
13:51:51.0184 [ ] service/servicedvb.cpp:1747 timeshift [eDVBServicePlay] timeshift
13:51:51.0188 [ ] dvb/demux.cpp:88 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
13:51:51.0189 [ ] dvb/demux.cpp:284 start [eDVBSectionReader] DMX_SET_FILTER pid=18
13:51:52.0194 [ ] service/servicedvb.cpp:1747 timeshift [eDVBServicePlay] timeshift
13:51:52.0861 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
13:51:52.0886 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:52+0000 [-] KEY: 174 0 KEY_EXIT EXIT
13:51:52.5327 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 ae 1
13:51:52.5354 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:52+0000 [-] KEY: 174 1 KEY_EXIT EXIT
13:51:53.1923 [ ] base/estring.cpp:536 convertDVBUTF8 [convertDVBUTF8] reserved 26
13:51:53.2376 [ ] base/estring.cpp:536 convertDVBUTF8 [convertDVBUTF8] reserved 26
13:51:53.9094 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 8b 1
13:51:53.9129 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] KEY: 139 0 KEY_MENU MENU
13:51:53.9145 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [ActionMap] Keymap 'InfobarMenuActions' -> Action = 'mainMenu'.
13:51:53.9418 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [ActionMap] Keymap(s) 'GlobalActions, WizardActions, DirectionActions, ColorActions, NumberActions, MenuActions, EPGSelectActions, InfobarActions' -> Undefined action(s) 'home'.
13:51:53.9477 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] processing screen spazeTeamMenu:
13:51:53.9566 [ ] gdi/epng.cpp:24 loadPNG [ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/spazeMenu/image/nm_sel-fs8.png
13:51:53.9574 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] pixmap file /usr/lib/enigma2/python/Plugins/Extensions/spazeMenu/image/nm_sel-fs8.png not found!
13:51:53.9617 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] warning, skin is missing element estado2 in <class 'plugin.plugin.spazeTeamMenu'>
13:51:53.9632 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9643 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9651 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9658 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9664 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "valign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9670 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9677 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9688 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Attribute "halign" with value "center" in object of type "ePixmap" is not implemented
13:51:53.9750 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
13:51:53.9763 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SKIN] processing screen <embedded-in-'SimpleSummary'>:
13:51:53.9795 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SCREENNAME] ['spazeTeamMenu_summary', 'SimpleSummary']
13:51:53.9817 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:53+0000 [-] [SCREENNAME] spazeTeamMenu
13:51:54.0337 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 8b 1
13:51:54.0367 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:54+0000 [-] KEY: 139 1 KEY_MENU MENU
13:51:54.0846 [ ] base/estring.cpp:536 convertDVBUTF8 [convertDVBUTF8] reserved 26
13:51:54.1439 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:54+0000 [-] [SKIN] processing screen spzSubMenu:
13:51:54.1488 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:54+0000 [-] [SKIN] Attribute "valign" with value "bottom" in object of type "eListbox" is not implemented
13:51:54.1513 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:54+0000 [-] [SCREENNAME] spzSubMenu
13:51:54.2502 [ ] base/estring.cpp:536 convertDVBUTF8 [convertDVBUTF8] reserved 26
13:51:55.2963 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
13:51:55.2993 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] KEY: 103 0 KEY_UP UP
13:51:55.3004 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'up'.
13:51:55.5277 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
13:51:55.5299 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] KEY: 103 1 KEY_UP UP
13:51:55.6506 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
13:51:55.6532 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] KEY: 352 0 KEY_OK OK
13:51:55.6540 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'ok'.
13:51:55.6698 [ ] gdi/epng.cpp:24 loadPNG [ePNG] couldn't open mainmenu/missing.png
13:51:55.6839 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [SKIN] processing screen menu_setup:
13:51:55.7851 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [SKIN] No skin to read...
13:51:55.7861 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [SKIN] processing screen <embedded-in-'MenuSummary'>:
13:51:55.7871 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [SCREENNAME] MenuSummary
13:51:55.7882 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] [SCREENNAME] ['menu_setup', 'Menu']
13:51:55.9898 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
13:51:55.9940 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:55+0000 [-] KEY: 352 1 KEY_OK OK
13:51:56.4663 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
13:51:56.4687 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:56+0000 [-] KEY: 103 0 KEY_UP UP
13:51:56.4694 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:56+0000 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'up'.
13:51:56.6978 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
13:51:56.7005 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:56+0000 [-] KEY: 103 1 KEY_UP UP
13:51:57.0762 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 67 1
13:51:57.0789 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] KEY: 103 0 KEY_UP UP
13:51:57.0799 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] [ActionMap] Keymap 'WizardActions' -> Action = 'up'.
13:51:57.3077 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 67 1
13:51:57.3100 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] KEY: 103 1 KEY_UP UP
13:51:57.3990 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
13:51:57.4017 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] KEY: 352 0 KEY_OK OK
13:51:57.4025 { W } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] [ActionMap] Keymap 'WizardActions' -> Unknown action 'ok'! (Typo in keymap?)
13:51:57.4030 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] [ActionMap] Keymap 'OkCancelActions' -> Action = 'ok'.
13:51:57.4372 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] [SCREENNAME] ['menu_setup', 'Menu']
13:51:57.4414 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] Traceback (most recent call last):
13:51:57.4419 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/Components/ActionMap.py", line 77, in action
13:51:57.4427 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/Components/ActionMap.py", line 57, in action
13:51:57.4432 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/Screens/Menu.py", line 152, in okbuttonClick
13:51:57.4437 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
13:51:57.4452 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-systemplugins-spzusbdevices/1.5+gitAUTOINC+71a31ba7b6-r0/git/spzusbdevices/plugin/plugin.py", line 426, in plugin.plugin.startConfig
13:51:57.4460 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/mytest.py", line 381, in open
13:51:57.4479 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
13:51:57.4484 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/mytest.py", line 316, in instantiateDialog
13:51:57.4493 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
13:51:57.4504 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "/usr/lib/enigma2/python/mytest.py", line 338, in doInstantiateDialog
13:51:57.4513 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] dlg = screen(self, *arguments, **kwargs)
13:51:57.4518 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-systemplugins-spzusbdevices/1.5+gitAUTOINC+71a31ba7b6-r0/git/spzusbdevices/plugin/plugin.py", line 128, in plugin.plugin.UsbDevices.__init__
13:51:57.4523 { } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] File "tmp/work/cortexa15hf-neon-vfpv4-oe-linux-gnueabi/enigma2-plugin-systemplugins-spzusbdevices/1.5+gitAUTOINC+71a31ba7b6-r0/git/spzusbdevices/plugin/plugin.py", line 186, in plugin.plugin.UsbDevices.readall
13:51:57.4530 { E } /usr/lib/python2.7/site-packages/twisted/python/util.py:815 untilConcludes 2019-12-29 13:51:57+0000 [-] IOError: [Errno 2] No such file or directory: '/etc/dvb-usb-devices.list'
13:51:57.4531 [ E ] python/python.cpp:211 call [ePyObject] (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x99b94328>>,('OkCancelActions', 'ok')) failed)


dmesg

<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 8.2.0 (GCC) ) #1 SMP Mon Aug 12 07:59:13 UTC 2019
<6>[ 0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<6>[ 0.000000] Machine model: BCM972604USFF
<6>[ 0.000000] moving dtb from 0x0000000007618000 to 0x00000000009a3c88
<6>[ 0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
<6>[ 0.000000] cma: Reserved 16 MiB at 0x0000000051400000
<4>[ 0.000000] Forcing write-allocate cache policy for SMP
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 516096
<7>[ 0.000000] DMA zone: 512 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 65536 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 450560 pages, LIFO batch:31
<6>[ 0.000000] psci: probing for conduit method from DT.
<6>[ 0.000000] psci: PSCIv0.2 detected in firmware.
<6>[ 0.000000] psci: Using standard PSCI v0.2 function IDs
<6>[ 0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r8192 d24116 u49152
<7>[ 0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515584
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 1305652K/2064384K available (6732K kernel code, 326K rwdata, 2228K rodata, 324K init, 215K bss, 742348K reserved, 16384K cma-reserved, 1070076K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc08c864c (8962 kB)
<5>[ 0.000000] .init : 0xc08c9000 - 0xc091a000 ( 324 kB)
<5>[ 0.000000] .data : 0xc091a000 - 0xc096ba38 ( 327 kB)
<5>[ 0.000000] .bss : 0xc096e000 - 0xc09a3c88 ( 216 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq: 89)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq: 61)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq: 62)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq: 91)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq: 57)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500, parent irq: 95)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400, parent irq: 96)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540, parent irq: 93)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440, parent irq: 94)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480, parent irq: 98)
<6>[ 0.000000] MCP: Enabling write pairing
<6>[ 0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
<6>[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000360] Console: colour dummy device 80x30
<6>[ 0.000377] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000384] pid_max: default: 32768 minimum: 301
<6>[ 0.000467] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000472] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000826] CPU: Testing write buffer coherency: ok
<6>[ 0.001030] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001063] Setting up static identity map for 0x8480 - 0x84d8
<6>[ 0.015044] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.015086] Brought up 2 CPUs
<6>[ 0.015094] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.015098] CPU: All CPU(s) started in HYP mode.
<6>[ 0.015101] CPU: Virtualization extensions available.
<6>[ 0.015412] devtmpfs: initialized
<6>[ 0.023028] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0 rev 0
<6>[ 0.023224] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.024279] NET: Registered protocol family 16
<6>[ 0.025404] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[ 0.030191] cpuidle: using governor ladder
<6>[ 0.036200] cpuidle: using governor menu
<6>[ 0.041438] No ATAGs?
<6>[ 0.041469] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.041475] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ 0.041750] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
<6>[ 0.052383] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
<6>[ 0.052551] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
<5>[ 0.052856] SCSI subsystem initialized
<7>[ 0.053171] libata version 3.00 loaded.
<6>[ 0.053337] usbcore: registered new interface driver usbfs
<6>[ 0.053374] usbcore: registered new interface driver hub
<6>[ 0.053401] usbcore: registered new device driver usb
<6>[ 0.053450] Linux video capture interface: v2.00
<6>[ 0.053500] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.053503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
<6>[ 0.053517] PTP clock support registered
<6>[ 0.053860] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.055063] Switched to clocksource arch_sys_counter
<5>[ 0.055336] FS-Cache: Loaded
<4>[ 0.061018] thermal thermal_zone0: failed to read out thermal zone (-22)
<6>[ 0.061154] NET: Registered protocol family 2
<6>[ 0.061505] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.061521] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
<6>[ 0.061543] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.061582] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.061594] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.061674] NET: Registered protocol family 1
<6>[ 0.061866] RPC: Registered named UNIX socket transport module.
<6>[ 0.061870] RPC: Registered udp transport module.
<6>[ 0.061873] RPC: Registered tcp transport module.
<6>[ 0.061876] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.061889] PCI: CLS 0 bytes, default 64
<4>[ 0.062254] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
<6>[ 0.062277] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.063072] futex hash table entries: 512 (order: 3, 32768 bytes)
<5>[ 0.063891] NFS: Registering the id_resolver key type
<5>[ 0.063912] Key type id_resolver registered
<5>[ 0.063915] Key type id_legacy registered
<6>[ 0.063925] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.063930] Installing knfsd (copyright (C) 1996 [email protected]).
<5>[ 0.064064] FS-Cache: Netfs 'cifs' registered for caching
<5>[ 0.064095] Key type cifs.spnego registered
<6>[ 0.064470] fuse init (API version 7.23)
<6>[ 0.065131] bounce: pool size: 64 pages
<6>[ 0.065159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 0.065167] io scheduler noop registered
<6>[ 0.065173] io scheduler deadline registered
<6>[ 0.065182] io scheduler cfq registered (default)
<6>[ 0.065421] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0ad6000, irqs: 261, 262
<6>[ 0.065966] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
<6>[ 0.066325] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
<4>[ 0.066376] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
<6>[ 0.166509] brcm-pci f0460000.pcie: link down
<6>[ 0.167810] brcmstb_memc f1102000.memc-ddr: registered
<6>[ 0.167989] brcm-waketimer f0417680.waketimer: registered, with irq 264
<6>[ 0.168180] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.169110] console [ttyS0] disabled
<6>[ 0.169135] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud = 5062500) is a 16550A
<6>[ 0.920414] console [ttyS0] enabled
<6>[ 0.924243] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud = 5062500) is a 16550A
<6>[ 0.933456] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud = 5062500) is a 16550A
<6>[ 0.945451] loop: module loaded
<6>[ 0.949308] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_ALPM
<4>[ 0.956723] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
<6>[ 0.962755] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
<6>[ 0.980065] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
<6>[ 0.989041] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 0.997541] scsi host0: brcm-ahci
<6>[ 1.001005] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x100 irq 87
<6>[ 1.008938] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
<6>[ 1.016333] libphy: Fixed MDIO Bus: probed
<6>[ 1.020878] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
<4>[ 1.026759] bcmgenet f0480000.ethernet: failed to get enet-mux clock
<6>[ 1.046049] libphy: bcmgenet MII bus: probed
<3>[ 1.070199] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY clock
<6>[ 1.078028] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
<6>[ 1.083871] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
<6>[ 1.089980] xhci-brcm: xHCI BRCM driver
<6>[ 1.093971] ehci-brcm: EHCI BRCM driver
<6>[ 1.112172] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
<6>[ 1.117934] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 1
<6>[ 1.126063] ata1: SATA link down (SStatus 0 SControl 300)
<6>[ 1.135917] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
<6>[ 1.148056] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.154636] hub 1-0:1.0: USB hub found
<6>[ 1.158410] hub 1-0:1.0: 1 port detected
<6>[ 1.162601] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
<6>[ 1.168355] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 2
<6>[ 1.186301] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
<6>[ 1.198057] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
<6>[ 1.204588] hub 2-0:1.0: USB hub found
<6>[ 1.208359] hub 2-0:1.0: 1 port detected
<6>[ 1.212585] ohci-brcm: OHCI BRCM driver
<6>[ 1.216546] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
<6>[ 1.222308] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus number 3
<6>[ 1.230218] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
<6>[ 1.291410] hub 3-0:1.0: USB hub found
<6>[ 1.295183] hub 3-0:1.0: 1 port detected
<6>[ 1.299340] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
<6>[ 1.305104] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus number 4
<6>[ 1.313059] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
<6>[ 1.374396] hub 4-0:1.0: USB hub found
<6>[ 1.378169] hub 4-0:1.0: 1 port detected
<6>[ 1.382374] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.388923] ehci-pci: EHCI PCI platform driver
<6>[ 1.393433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.399634] ohci-pci: OHCI PCI platform driver
<6>[ 1.404210] usbcore: registered new interface driver usb-storage
<6>[ 1.410362] mousedev: PS/2 mouse device common for all mice
<6>[ 1.416209] i2c /dev entries driver
<6>[ 1.420352] IR NEC protocol handler initialized
<6>[ 1.424896] IR RC5(x/sz) protocol handler initialized
<6>[ 1.429963] IR RC6 protocol handler initialized
<6>[ 1.434504] IR JVC protocol handler initialized
<6>[ 1.439049] IR Sony protocol handler initialized
<6>[ 1.443677] IR SANYO protocol handler initialized
<6>[ 1.448393] IR Sharp protocol handler initialized
<6>[ 1.453109] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.458956] IR XMP protocol handler initialized
<6>[ 1.463817] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
<6>[ 1.509085] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
<6>[ 1.515765] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.521958] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.522059] usb 2-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.532974] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.539881] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
<6>[ 1.545989] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
<6>[ 1.582058] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using ADMA
<6>[ 1.589588] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.597237] usbcore: registered new interface driver usbhid
<6>[ 1.602825] usbhid: USB HID core driver
<6>[ 1.610122] Initializing XFRM netlink socket
<6>[ 1.614480] NET: Registered protocol family 10
<6>[ 1.619388] NET: Registered protocol family 17
<6>[ 1.623866] NET: Registered protocol family 15
<5>[ 1.630448] Key type dns_resolver registered
<5>[ 1.634864] Registering SWP/SWPB emulation handler
<6>[ 1.645885] ALSA device list:
<6>[ 1.648879] No soundcards found.
<6>[ 1.652501] Waiting for root device /dev/mmcblk0p7...
<6>[ 1.668840] usb-storage 2-1:1.0: USB Mass Storage device detected
<6>[ 1.675117] scsi host1: usb-storage 2-1:1.0
<6>[ 1.694724] mmc0: MAN_BKOPS_EN bit is not set
<6>[ 1.705279] mmc0: new high speed MMC card at address 0001
<6>[ 1.710879] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[ 1.715503] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[ 1.721491] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[ 1.727464] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<6>[ 1.736446] mmcblk0: p1 p2 p3 p4 p5 p6 p7
<4>[ 1.758760] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
<4>[ 1.773182] EXT4-fs (mmcblk0p7): warning: maximal mount count reached, running e2fsck is recommended
<6>[ 1.782855] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
<6>[ 1.791762] VFS: Mounted root (ext4 filesystem) on device 179:7.
<6>[ 1.801959] devtmpfs: mounted
<6>[ 1.805095] Freeing unused kernel memory: 324K (c08c9000 - c091a000)
<6>[ 2.619276] SGI XFS with security attributes, realtime, no debug enabled
<6>[ 2.881455] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
<5>[ 3.227484] random: dd urandom read with 15 bits of entropy available
<5>[ 3.849977] scsi 1:0:0:0: Direct-Access APPLE HD D HTS545050A7E36 GG2A PQ: 0 ANSI: 0
<5>[ 3.858563] sd 1:0:0:0: Attached scsi generic sg0 type 0
<5>[ 3.859806] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
<5>[ 3.860400] sd 1:0:0:0: [sda] Write Protect is off
<7>[ 3.860405] sd 1:0:0:0: [sda] Mode Sense: 17 00 00 00
<5>[ 3.861026] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 3.898707] sda: sda1
<5>[ 3.904925] sd 1:0:0:0: [sda] Attached SCSI disk
<4>[ 4.021168] procmk_init
<4>[ 4.027380] bcm_event: module license 'Proprietary' taints kernel.
<4>[ 4.033621] Disabling lock debugging due to kernel taint
<6>[ 4.242514] nexus.ko: virtual irq: enabled (267)
<6>[ 4.247233] nexus.ko: shared gpio banks: enabled
<6>[ 4.641840] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<5>[ 5.087295] random: nonblocking pool is initialized
<6>[ 7.290322] DVB: registering new adapter (_vuplus_zero4k_)
<4>[ 7.759788] bcm7252s: hotplug_callback():
<4>[ 7.759788] Hotplug - status.connected 1:0:1
<4>[ 7.766878] bcm7252s: hotplug_callback():
<4>[ 7.766878] Hotplug - connecting HDMI to display 0xe
<6>[ 7.968054] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
<4>[ 8.006476] [MPVR]: >> misc_pvr_init
<4>[ 8.011269] [VID]: 6bcm7335_video_init
<4>[ 8.015804] [AUD]: 6bcm7335_audio_init
<4>[ 8.026213] [AUD]: >> bcm_audio_capture_init
<4>[ 8.034123] qam=0, ofdm=0, satellite=1
<6>[ 8.053918] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
<6>[ 8.098406] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>[ 8.112344] [LCD]: registered
<6>[ 8.221205] [CI]: registered ci0
<6>[ 9.370368] [CI]: CI interface initialised
<6>[ 9.370368]
<6>[ 9.382127] [DFP]: registered dbox fp
<6>[ 9.388488] [SC]: registered sci0
<4>[ 9.520053] system_time_set wakeup mode get
<4>[ 9.584061] system_time_set wakeup mode get 0xc4
<4>[ 9.709363] [VID]: VIDEO_SET_STREAMTYPE 0
<4>[ 9.714122] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 9.718834] [VID]: VIDEO_PLAY 1 2 0
<4>[ 9.728009] [VID]: VIDEO_CONTINUE 1 1
<4>[ 9.731899] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<6>[ 9.991059] f0480000.etherne:01: Broadcom BCM7260 PHY revision: 0x01
<6>[ 9.998250] bcmgenet f0480000.ethernet: configuring instance for internal PHY
<6>[ 10.005574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<4>[ 10.009140] [VID]: VIDEO_STOP 0 1
<4>[ 10.015093] [VID]: VIDEO_SELECT_SOURCE 0 0
<6>[ 12.002127] bcmgenet f0480000.ethernet eth0: Link is Down
<6>[ 12.346932] bcmgenet f0480000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[ 12.355414] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>[ 13.631341] Bluetooth: Core ver 2.20
<6>[ 13.635332] NET: Registered protocol family 31
<6>[ 13.639845] Bluetooth: HCI device and connection manager initialized
<6>[ 13.646350] Bluetooth: HCI socket layer initialized
<6>[ 13.651281] Bluetooth: L2CAP socket layer initialized
<6>[ 13.656592] Bluetooth: SCO socket layer initialized
<4>[ 15.734408] [VID]: VIDEO_SET_STREAMTYPE 0
<4>[ 15.738555] [VID]: VIDEO_SELECT_SOURCE 1 0
<4>[ 15.742907] [VID]: VIDEO_PLAY 1 2 0
<4>[ 15.751892] [VID]: VIDEO_CONTINUE 1 1
<4>[ 15.755792] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
<4>[ 16.032352] [VID]: VIDEO_STOP 0 1
<4>[ 16.036638] [VID]: VIDEO_SELECT_SOURCE 0 0
<6>[ 76.888073] usb 2-1: reset high-speed USB device number 2 using ehci-brcm
<4>[ 80.413844] [AUD]: AUDIO_SET_MUTE 0
<4>[ 80.418869] [AUD]: AUDIO_SET_MIXER -853541232
<4>[ 80.423368] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[ 80.428432] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
<4>[ 80.435067] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<6>[ 86.909572] sh (1734): drop_caches: 3
<6>[ 87.252815] sh (1743): drop_caches: 3
<4>[ 88.498703] [AUD]: AUDIO_SET_MIXER -853541232
<4>[ 88.503173] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
<4>[ 88.508254] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 88.515253] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
<4>[ 89.883368] FE tune
<4>[ 90.112896] [AUD]: AUDIO_SELECT_SOURCE 0
<4>[ 90.117863] [AUD]: AUDIO_SET_BYPASS_MODE 0
<4>[ 90.122080] [AUD]: AC3 downmix 0 state : 0
<4>[ 90.126332] [AUD]: AUDIO_PAUSE 0
<4>[ 90.129681] [AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[ 90.140593] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 90.144828] [VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720
<4>[ 90.151572] [VID]: VIDEO_GET_SIZE aspect: 1 3
<4>[ 90.155996] [VID]: VIDEO_SET_STREAMTYPE 1
<4>[ 90.160291] [VID]: VIDEO_FREEZE 0 0
<4>[ 90.163901] [VID]: VIDEO_PLAY 0 5 2
<4>[ 90.172799] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 90.176946] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 90.181432] [VID]: VIDEO_CONTINUE 0 1
<4>[ 90.185349] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcd133200
<4>[ 90.190326] [AUD]: Mute : 0
<4>[ 90.193960] [AUD]: AUDIO_CHANNEL_SELECT 0
<4>[ 90.536241] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 90.540486] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 90.545187] [VID]: VIDEO_CONTINUE 0 1
<4>[ 90.549111] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcd133200
<4>[ 90.554114] [AUD]: Mute : 0
<4>[ 138.580829] [VID]: VIDEO_STOP 1 1
<4>[ 138.584340] [AUD]: AUDIO_STOP 0
<4>[ 138.612094] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0
<4>[ 138.616465] [AUD]: AUDIO_CONTINUE aph=0 0 0
<4>[ 139.065956] FE tune
<4>[ 139.241041] [AUD]: AUDIO_SELECT_SOURCE 0
<4>[ 139.246276] [AUD]: AUDIO_SET_BYPASS_MODE 1
<4>[ 139.250482] [AUD]: downmix 0 state : 0
<4>[ 139.254431] [AUD]: AUDIO_PAUSE 0
<4>[ 139.257803] [AUD]: AUDIO_PLAY 0 decoder start : 0
<4>[ 139.264000] [VID]: VIDEO_SELECT_SOURCE 0 0
<4>[ 139.268308] [VID]: VIDEO_SET_STREAMTYPE 1
<4>[ 139.272578] [VID]: VIDEO_FREEZE 0 0
<4>[ 139.276188] [VID]: VIDEO_PLAY 0 5 2
<4>[ 139.285105] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 139.289245] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 139.293792] [VID]: VIDEO_CONTINUE 0 1
<4>[ 139.297669] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcd1a7a00
<4>[ 139.302649] [AUD]: Mute : 0
<4>[ 139.327383] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
<4>[ 139.333255] [VID]: VIDEO_GET_SIZE aspect: 1 0
<4>[ 139.457618] [VID]: VIDEO_SLOWMOTION 0 1
<4>[ 139.461785] [VID]: VIDEO_FAST_FORWARD 0 1 0
<4>[ 139.466277] [VID]: VIDEO_CONTINUE 0 1
<4>[ 139.470203] [AUD]: AUDIO_CONTINUE 0 1 aph=0xcd1a7a00
<4>[ 139.475186] [AUD]: Mute : 0
 

evox

OpenSpa Team
Miembro del equipo
Moderador OpenSPA
2 Mar 2009
5.975
4.389
0
Descomprime el zip que adjunto y metes el archivo dvb-usb-devices.list por ftp en la carpeta /etc del deco, luego reinicias el receptor y pruebas.

Salu2.
 

Adjuntos

  • dvb-usb-devices.zip
    6,1 KB · Visitas: 9

ghytre

Usuario Activo
Fan de OpenSPA
Amigo OpenSPA
12 Feb 2019
194
251
0
38
Descomprime el zip que adjunto y metes el archivo dvb-usb-devices.list por ftp en la carpeta /etc del deco, luego reinicias el receptor y pruebas.

Salu2.

Solucionado, muchas gracias.