Hola os comento mi problema tengo sbox configurada de la siguiente manera:
server_only=0# 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/camd/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=357 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[4Exxxxxx]
emm=0
portlist=0
portpath=
[TIGER601]
rsa=D8E.....
Cuando intento arrancar gbox desde telenet me da el siguiente error:
15:41:57 io: error opening /dev/scard
AZBox[SboxCAS]$ 15:41:57 warning: no cards? no party
En teoria es porque no me detecta la tarjeta, pero de vez en cuando le da por detectarla y me pone lo siguiente y el deco se me relentiza y luego se resetea:
15:34:23 sbox: checking for /camd/OpenXCAS/SboxCAS/sbox.conf... OK
AZBox[SboxCAS]$ 15:34:27 io: sci device detected
15:34:27 reset: got atr on slot0
15:34:27 reset: atr xxx.....
15:34:27 reset: hist xxxxxxxxxx
15:34:27 reset: char T I G E R 6 0 1 R e v M 8 0
15:34:27 reset: crl 13
15:34:27 reset: working at 3.570Mhz (max 5.000Mhz)
15:34:28 sbox: nagra tiger/ncmed card init
15:34:28 nagra: serial xxxxxxxx (xxxxxxxxx)
15:34:28 nagra: provider 00, id 006E11, ppua xxxxxxxx, caid 1812
15:34:28 nagra: card init ok
15:34:28
15:34:28 webif: init
15:34:28 sbox: entering main loop
15:34:28 sbox: mixed mode
[OPENXCAS_API:Wed Nov 17 15:34:28.741] load_xcas_control:68 ## loaded control
osdep_msq_server_open : key_request 0x35E78453 key_response 0x35E78454
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x35E78453 key_response 0x35E78454
webif: : Address already in use
y de hay no pasa alguna idea?? Gracias
server_only=0# 0=camd+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/camd/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=81 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver=1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15050 # newcamd port
mhz=357 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[4Exxxxxx]
emm=0
portlist=0
portpath=
[TIGER601]
rsa=D8E.....
Cuando intento arrancar gbox desde telenet me da el siguiente error:
15:41:57 io: error opening /dev/scard
AZBox[SboxCAS]$ 15:41:57 warning: no cards? no party
En teoria es porque no me detecta la tarjeta, pero de vez en cuando le da por detectarla y me pone lo siguiente y el deco se me relentiza y luego se resetea:
15:34:23 sbox: checking for /camd/OpenXCAS/SboxCAS/sbox.conf... OK
AZBox[SboxCAS]$ 15:34:27 io: sci device detected
15:34:27 reset: got atr on slot0
15:34:27 reset: atr xxx.....
15:34:27 reset: hist xxxxxxxxxx
15:34:27 reset: char T I G E R 6 0 1 R e v M 8 0
15:34:27 reset: crl 13
15:34:27 reset: working at 3.570Mhz (max 5.000Mhz)
15:34:28 sbox: nagra tiger/ncmed card init
15:34:28 nagra: serial xxxxxxxx (xxxxxxxxx)
15:34:28 nagra: provider 00, id 006E11, ppua xxxxxxxx, caid 1812
15:34:28 nagra: card init ok
15:34:28
15:34:28 webif: init
15:34:28 sbox: entering main loop
15:34:28 sbox: mixed mode
[OPENXCAS_API:Wed Nov 17 15:34:28.741] load_xcas_control:68 ## loaded control
osdep_msq_server_open : key_request 0x35E78453 key_response 0x35E78454
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x35E78453 key_response 0x35E78454
webif: : Address already in use
y de hay no pasa alguna idea?? Gracias
