Dejo lista errores/bug observados en zgemma H9S, expongo los mas visibles e importantes:
Imagen testeo: openspa 7.3.002
https://www.dropbox.com/s/7ovcr24c1zid7nq/Interstellar-divx-hevc-uhd-51ch-4K.mkv?dl=0
https://www.dropbox.com/s/undmlkbpg8rdnql/KAZU_(SUBTITLES)_4K23.98p_HEVC_10Mbits.mkv?dl=0
Sobre todo los 4 primeros puntos si me parece importante que tengan solucion.
Imagen testeo: openspa 7.3.002
- No funcionan los subtitulos de los canales ni tampoco de grabaciones o videos.
- No funciona la busqueda ciega, y tras intentar salir del menu de busqueda ciega (no encontrar ningun transpondedor), se produce crash log que adjunto (probado con lnb normal universal, en todos los parametros posibles que tiene este menu, y en todos ocurre igual). (prueba realizada con antena motorizada)
openSPA Enigma2 crash log
crashdate=sáb oct 20 10:51:57 2018
compiledate=Oct 15 2018
skin=MetrixJRSD/skin.xml
sourcedate=2018-10-13
branch=master
rev=b0f8c29
component=Enigma2
stbmodel=h9
stbmodel=h9
kernelcmdline=console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=8,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) mem=1G mmz=ddr,0,0,48M vmalloc=500M
nimsockets=NIM Socket 0:
imageversion=box_type=zgemmah9s
imageissue=Welcome to openSPA for %h
9.9478 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:09.9478 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:09.9478 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:09.9479 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:09.9479 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:09.9479 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:09.9480 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:09.9480 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:09.9480 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 11700001 Pol 0 SR 1049 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:09.9481 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 1100 MHz
10:51:09.9481 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:09.9484 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:09.9485 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 1
10:51:09.9614 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:09.9714 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:09.9714 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:09.9715 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:09.9715 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:09.9720 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:09.9720 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:10.4721 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:11.4484 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:12.9486 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:14.4489 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:15.9494 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:17.4497 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:18.9500 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:20.4503 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:21.9470 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 20, inversion off, m_tuning 2
10:51:21.9471 [ ] dvb/frontend.cpp:1108 feEvent [eDVBFrontend] FE_TIMEDOUT! ..abort
10:51:21.9471 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:21.9512 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:351 setNextRange Sat Blindscan current range (10700000, 11700001, 1)
10:51:21.9516 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 11700000 3049/4098
10:51:21.9535 [ ] dvb/frontend.cpp:3135 tune tune tuner 0
10:51:21.9535 [ ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
10:51:21.9536 [ ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 1
10:51:21.9536 [ ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 0 found
10:51:21.9536 [ ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 3300
10:51:21.9536 [ ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 3300 found
10:51:21.9536 [ ] dvb/sec.cpp:194 canTune ret1 10000
10:51:21.9537 [ ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 10000
10:51:21.9537 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:21.9537 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:21.9537 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:21.9537 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:21.9538 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:21.9538 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:21.9539 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:21.9539 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:21.9539 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 10700000 Pol 1 SR 1000 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:21.9540 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 950 MHz
10:51:21.9540 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:21.9543 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:21.9543 [ ] dvb/frontend.cpp:2011 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 setVoltage 1
10:51:21.9547 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:21.9648 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 0
10:51:21.9777 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:21.9877 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:21.9877 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:21.9878 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:21.9878 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:22.0110 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:22.0110 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:22.5111 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:23.4542 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:24.9545 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:26.4548 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:26.6114 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 18f 1
10:51:26.6126 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 0 KEY_GREEN GREEN
10:51:26.6128 { } Components/ActionMap.py:46 action [ActionMap] ColorActions green
10:51:26.7831 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 18f 1
10:51:26.7843 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 1 KEY_GREEN GREEN
10:51:27.9551 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:29.4554 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:29.4733 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 18f 1
10:51:29.4744 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 0 KEY_GREEN GREEN
10:51:29.4746 { } Components/ActionMap.py:46 action [ActionMap] ColorActions green
10:51:29.6450 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 18f 1
10:51:29.6462 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 1 KEY_GREEN GREEN
10:51:30.9557 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:32.4559 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:33.9563 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:35.4566 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:36.9569 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:38.4571 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:39.9574 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:41.4577 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:41.9878 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:42.9587 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:351 setNextRange Sat Blindscan current range (11700001, 12750000, 1)
10:51:42.9590 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 10700000 2048/4098
10:51:42.9610 [ ] dvb/frontend.cpp:3135 tune tune tuner 0
10:51:42.9611 [ ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
10:51:42.9611 [ ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 1
10:51:42.9611 [ ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 0 found
10:51:42.9611 [ ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 3300
10:51:42.9612 [ ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 3300 found
10:51:42.9612 [ ] dvb/sec.cpp:194 canTune ret1 10000
10:51:42.9612 [ ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 10000
10:51:42.9612 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:42.9612 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:42.9613 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:42.9613 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:42.9613 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:42.9614 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:42.9614 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:42.9614 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:42.9614 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 11700001 Pol 1 SR 1049 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:42.9615 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 1100 MHz
10:51:42.9615 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:42.9618 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:42.9619 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 1
10:51:42.9748 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:42.9849 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:42.9849 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:42.9849 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:42.9850 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:42.9855 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:42.9855 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:43.4856 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:44.4618 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:45.9621 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:47.4624 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:48.9627 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:49.2110 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 20, inversion off, m_tuning 2
10:51:49.2111 [ ] dvb/frontend.cpp:1108 feEvent [eDVBFrontend] FE_TIMEDOUT! ..abort
10:51:49.2111 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:49.2355 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 0
10:51:49.2356 [ ] dvb/frontend.cpp:1118 feEvent [eDVBFrontend] stateLostLock
10:51:49.2356 [ ] dvb/dvb.cpp:1904 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 lost lock, unavailable now.
10:51:50.4637 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 11700000 4098/4098
10:51:50.4666 { } Screens/Screen.py:151 show [SCREENNAME] SetupSummary
10:51:50.4699 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:50.4706 { } Screens/Screen.py:151 show [SCREENNAME] ['Blindscan']
10:51:50.4709 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:183 satelliteTransponderSearchSessionClosed satelliteTransponderSearchSessionClosed, val (True,)
10:51:50.4735 { } skin.py:1501 readSkin [SKIN] processing screen MessageBox:
10:51:50.4748 { E } skin.py:1335 process_widget component with name 'WarningPixmap' was not found in skin of screen 'MessageBox'!
10:51:50.4829 { } skin.py:1251 readSkin [SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
10:51:50.4835 { } skin.py:1501 readSkin [SKIN] processing screen <embedded-in-'SimpleSummary'>:
10:51:50.4851 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox_summary', 'SimpleSummary']
10:51:50.4864 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox']
10:51:53.2453 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
10:51:53.2464 { } Screens/InfoBarGenerics.py:202 actionA KEY: 352 0 KEY_OK OK
10:51:53.2467 { } Components/ActionMap.py:46 action [ActionMap] MsgBoxActions ok
10:51:53.2476 { } Screens/Screen.py:151 show [SCREENNAME] SetupSummary
10:51:53.2486 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:53.2489 { } Screens/Screen.py:151 show [SCREENNAME] ['Blindscan']
10:51:53.4170 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
10:51:53.4182 { } Screens/InfoBarGenerics.py:202 actionA KEY: 352 1 KEY_OK OK
10:51:53.4687 [ ] dvb/frontend.cpp:919 closeFrontend [eDVBFrontend] try to close frontend 0
10:51:57.8303 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
10:51:57.8313 { } Screens/InfoBarGenerics.py:202 actionA KEY: 174 0 KEY_EXIT EXIT
10:51:57.8316 { } Components/ActionMap.py:46 action [ActionMap] SetupActions cancel
10:51:57.8317 { } Navigation.py:268 playService playing None
10:51:57.8335 { } Screens/Screen.py:151 show [SCREENNAME] MenuSummary
10:51:57.8344 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:57.8349 { } Screens/Screen.py:151 show [SCREENNAME] ['menu_scan', 'Menu']
10:51:57.8362 { D } Traceback (most recent call last):
10:51:57.8363 { D } File "/usr/lib/enigma2/python/mytest.py", line 272, in processDelay
10:51:57.8374 { D } callback(*retval)
10:51:57.8374 { D } File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
10:51:57.8385 { D } TypeError: BlindscanCallback() takes exactly 2 arguments (1 given)
10:51:57.8385 [ E ] python/python.cpp:209 call [ePyObject] (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0xb06b4ee0>>,()) failed)
dmesg
<6>Booting Linux on physical CPU 0x0
<5>Linux version 4.4.35 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #2 SMP Mon Sep 10 16:43:28 CEST 2018
<6>CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<5>initmrd: found no initmrd.
<6>tag-emmc: emmc is not scaned!
<6>Machine model: Hisilicon
<6>cma: Reserved 48 MiB at 0x3bc00000
<6>cma: Reserved 4 MiB at 0x3fc00000
<6>Memory policy: Data cache writealloc
<7>-------------Fixed IO Mapping----------
<7>Virt, Phys, Size
<7>0xF9000000, 0xF8000000, 0x02000000
<7>--------------------------------------
<7>On node 0 totalpages: 262144
<7>free_area_init_node: node 0, pgdat c0b69480, node_mem_map dfbf9000
<7> Normal zone: 1032 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 132096 pages, LIFO batch:31
<7> HighMem zone: 130048 pages, LIFO batch:31
<6>PERCPU: Embedded 13 pages/cpu @dfbb5000 s22604 r8192 d22452 u53248
<7>pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096
<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<6>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261112
<5>Kernel command line: console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=8,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) mem=1G mmz=ddr,0,0,48M vmalloc=500M
<6>log_buf_len individual max cpu contribution: 4096 bytes
<6>log_buf_len total cpu_extra contributions: 12288 bytes
<6>log_buf_len min size: 16384 bytes
<6>log_buf_len: 32768 bytes
<6>early log buf free: 14388(87%)
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 963856K/1048576K available (7783K kernel code, 588K rwdata, 2220K rodata, 536K init, 537K bss, 31472K reserved, 53248K cma-reserved, 456692K highmem)
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5> vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
<5> lowmem : 0xc0000000 - 0xe0400000 ( 516 MB)
<5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5> modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
<5> .text : 0xc0008000 - 0xc07a214c (7785 kB)
<5> .init : 0xc0a68000 - 0xc0aee000 ( 536 kB)
<5> .data : 0xc0aee000 - 0xc0b81320 ( 589 kB)
<5> .bss : 0xc0b83000 - 0xc0c0940c ( 538 kB)
<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>Hierarchical RCU implementation.
<6> Build-time adjustment of leaf fanout to 32.
<6>NR_IRQS:352
<6>clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<6>ftrace: allocating 26587 entries in 78 pages
<6>CPU0: update cpu_capacity 1024
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8280 - 0x82d8
<4>CPU: hi3798mv200
<7>CPU1: powerup
<6>CPU1: update cpu_capacity 1024
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<7>CPU2: powerup
<6>CPU2: update cpu_capacity 1024
<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<7>CPU3: powerup
<6>CPU3: update cpu_capacity 1024
<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>Brought up 4 CPUs
<6>SMP: Total of 4 processors activated (12681.21 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>CPU3: update max cpu_capacity 1024
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>CPU2: update max cpu_capacity 1024
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>Serial: AMBA PL011 UART driver
<6>f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2
<6>console [ttyAMA0] enabled
<6>f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2
<6>f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2
<6>pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
<6>pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
<6>pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
<6>pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
<6>pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
<6>pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
<6>pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
<6>pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
<6>pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
<6>pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
<4>hisilicon-pcie: probe of f0001000.pcie failed with error -1
<6>hisi_iommu_ptable_addr:phy 0x1e800000 size:0x400000
<6>hisi_iommu_err_rdaddr :phy 0x1f7c7200 size:0x200
<6>hisi_iommu_err_wraddr :phy 0x1f7c7400 size:0x200
<6>in hisi_iommu_domain_init start
<6>in hisi_iommu_domain_init end
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
<6>ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
<6>spi_master spi0: will run message pump with realtime priority
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>clocksource: Switched to clocksource hisp804
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<6>NetWinder Floating Point Emulator V0.97 (double precision)
<6>hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
<6>futex hash table entries: 1024 (order: 4, 65536 bytes)
<5>VFS: Disk quotas dquot_6.6.0
<6>VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>Installing knfsd (copyright (C) 1996 [email protected]).
<5>FS-Cache: Netfs 'cifs' registered for caching
<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<7>yaffs: yaffs built Installing.
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>hiahci-phy: registered new sata phy driver
<6>brd: module loaded
<6>loop: module loaded
<6>hifmc100: registerd new interface driver hifmc100.
<5>hifmc100: Found flash memory controller hifmc100.
<6>hifmc100: no found spi-nor device.
<6>nand: id: 0x01 0xDA 0x90 0x95 0x44 0x01 0xDA 0x90
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion NAND 256MiB 3,3V 8-bit
<6>nand: Block:128KB Page:2KB OOB:64B ECC:4bits/512 Chip:256MB
<6>flashcache: initialize nand flash cache feature.
<6>flashstats: Create nand flash statistics interface.
<6>flashstats: nand:-read,-write,-erase,-ecc,
<4>mtd: hinand: skipping zero sized partition
<5>9 cmdlinepart partitions found on MTD device hinand
<5>Creating 9 MTD partitions on "hinand":
<5>0x000000000000-0x000000100000 : "boot"
<5>0x000000100000-0x000000200000 : "bootargs"
<5>0x000000200000-0x000000300000 : "baseparam"
<5>0x000000300000-0x000000400000 : "pqparam"
<5>0x000000400000-0x000000500000 : "logo"
<5>0x000000500000-0x000000600000 : "deviceinfo"
<5>0x000000600000-0x000000e00000 : "trustedcore"
<5>0x000000e00000-0x000001e00000 : "kernel"
<5>0x000001e00000-0x000010000000 : "rootfs"
<6>mtd-regop: Create nand register operation interface, buffer size:8566
<6>hifmc100: no found spi-nand device.
<6>FEPHY:addr=2, la_am=0xd, ldo_am=0x4, r_tuning=0x14
<6>libphy: himii: probed
<6>hieth: attached port 0 PHY 2 to driver HiSilicon Festa v330
<6>libphy: higmac_mii_bus: probed
<6>No eth phy found at address 3
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform f9890000.ehci: EHCI Host Controller
<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform f9890000.ehci: irq 33, io mem 0xf9890000
<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller
<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform f9880000.ohci: irq 34, io mem 0xf9880000
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
<6>xhci-hcd f98a0000.xhci: irq 36, io mem 0xf98a0000
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver uas
<6>usbcore: registered new interface driver usb-storage
<6>usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial support registered for generic
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver xpad
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (1.1.1)
<6>sp805-wdt f8a2c000.watchdog: registration successful
<4>registered new interface driver himciV2.0_4.4.35_20170401
<6>usb 3-1: new high-speed USB device number 2 using xhci-hcd
<4>usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
<4>usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
<6>usb-storage 3-1:1.0: USB Mass Storage device detected
<6>scsi host0: usb-storage 3-1:1.0
<6>usb 2-2: new full-speed USB device number 2 using ohci-platform
<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>usbcore: registered new interface driver snd-usb-audio
<6>oprofile: using timer interrupt.
<6>Netfilter messages via NETLINK v0.30.
<6>nfnl_acct: registering with nfnetlink.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<5>ubi0: default fastmap pool size: 90
<5>ubi0: default fastmap WL pool size: 45
<5>ubi0: attaching mtd8
<6>mmc0: new high speed SDHC card at address 59b4
<6>mmcblk0: mmc0:59b4 USDU1 14.7 GiB
<6> mmcblk0: p1
<5>random: nonblocking pool is initialized
<5>ubi0: scanning is finished
<5>ubi0: attached mtd8 (name "rootfs", size 226 MiB)
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>ubi0: good PEBs: 1808, bad PEBs: 0, corrupted PEBs: 0
<5>ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>ubi0: max/mean erase counter: 2/0, WL threshold: 128, image sequence number: 651212310
<5>ubi0: available PEBs: 0, total reserved PEBs: 1808, PEBs reserved for bad PEB handling: 40
<5>ubi0: background thread "ubi_bgt0d" started, PID 910
<6>ALSA device list:
<6> No soundcards found.
<5>UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 912
<5>UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS (ubi0:0): FS size: 222334976 bytes (212 MiB, 1751 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 4ECF3C32-04AC-4AAF-BFB2-C3D148CAFAB2, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:14.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 536K (c0a68000 - c0aee000)
<4>This architecture does not have kernel memory protection.
<5>scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
<5>sd 0:0:0:0: [sda] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI removable disk
<4>FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
<6>usbcore: registered new interface driver tpm
<6>HI_DRV_SPI_Init success
<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
<4>spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>DVB: registering new adapter (dvb0)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>input: front panel as /devices/virtual/input/input1
<4>Mali: Mali device driver loaded
<6>SGI XFS with ACLs, security attributes, realtime, no debug enabled
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>sh (1790): drop_caches: 3
<6>sh (1799): drop_caches: 3
crashdate=sáb oct 20 10:51:57 2018
compiledate=Oct 15 2018
skin=MetrixJRSD/skin.xml
sourcedate=2018-10-13
branch=master
rev=b0f8c29
component=Enigma2
stbmodel=h9
stbmodel=h9
kernelcmdline=console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=8,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) mem=1G mmz=ddr,0,0,48M vmalloc=500M
nimsockets=NIM Socket 0:
imageversion=box_type=zgemmah9s
imageissue=Welcome to openSPA for %h
9.9478 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:09.9478 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:09.9478 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:09.9479 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:09.9479 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:09.9479 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:09.9480 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:09.9480 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:09.9480 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 11700001 Pol 0 SR 1049 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:09.9481 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 1100 MHz
10:51:09.9481 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:09.9484 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:09.9485 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 1
10:51:09.9614 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:09.9714 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:09.9714 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:09.9715 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:09.9715 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:09.9720 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:09.9720 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:10.4721 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:11.4484 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:12.9486 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:14.4489 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:15.9494 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:17.4497 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:18.9500 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:20.4503 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:21.9470 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 20, inversion off, m_tuning 2
10:51:21.9471 [ ] dvb/frontend.cpp:1108 feEvent [eDVBFrontend] FE_TIMEDOUT! ..abort
10:51:21.9471 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:21.9512 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:351 setNextRange Sat Blindscan current range (10700000, 11700001, 1)
10:51:21.9516 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 11700000 3049/4098
10:51:21.9535 [ ] dvb/frontend.cpp:3135 tune tune tuner 0
10:51:21.9535 [ ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
10:51:21.9536 [ ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 1
10:51:21.9536 [ ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 0 found
10:51:21.9536 [ ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 3300
10:51:21.9536 [ ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 3300 found
10:51:21.9536 [ ] dvb/sec.cpp:194 canTune ret1 10000
10:51:21.9537 [ ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 10000
10:51:21.9537 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:21.9537 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:21.9537 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:21.9537 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:21.9538 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:21.9538 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:21.9539 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:21.9539 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:21.9539 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 10700000 Pol 1 SR 1000 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:21.9540 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 950 MHz
10:51:21.9540 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:21.9543 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:21.9543 [ ] dvb/frontend.cpp:2011 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 setVoltage 1
10:51:21.9547 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:21.9648 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 0
10:51:21.9777 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:21.9877 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:21.9877 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:21.9878 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:21.9878 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:22.0110 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:22.0110 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:22.5111 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:23.4542 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:24.9545 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:26.4548 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:26.6114 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 18f 1
10:51:26.6126 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 0 KEY_GREEN GREEN
10:51:26.6128 { } Components/ActionMap.py:46 action [ActionMap] ColorActions green
10:51:26.7831 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 18f 1
10:51:26.7843 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 1 KEY_GREEN GREEN
10:51:27.9551 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:29.4554 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:29.4733 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 18f 1
10:51:29.4744 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 0 KEY_GREEN GREEN
10:51:29.4746 { } Components/ActionMap.py:46 action [ActionMap] ColorActions green
10:51:29.6450 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 18f 1
10:51:29.6462 { } Screens/InfoBarGenerics.py:202 actionA KEY: 399 1 KEY_GREEN GREEN
10:51:30.9557 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:32.4559 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:33.9563 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:35.4566 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:36.9569 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:38.4571 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:39.9574 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:41.4577 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:41.9878 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:42.9587 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:351 setNextRange Sat Blindscan current range (11700001, 12750000, 1)
10:51:42.9590 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 10700000 2048/4098
10:51:42.9610 [ ] dvb/frontend.cpp:3135 tune tune tuner 0
10:51:42.9611 [ ] dvb/sec.cpp:72 canTune [eDVBSatelliteEquipmentControl] direct_connected 1
10:51:42.9611 [ ] dvb/sec.cpp:111 canTune [eDVBSatelliteEquipmentControl] canTune 1
10:51:42.9611 [ ] dvb/sec.cpp:126 canTune [eDVBSatelliteEquipmentControl] lnb 0 found
10:51:42.9611 [ ] dvb/sec.cpp:136 canTune [eDVBSatelliteEquipmentControl] 1 option(s) at position 3300
10:51:42.9612 [ ] dvb/sec.cpp:150 canTune [eDVBSatelliteEquipmentControl] sat 3300 found
10:51:42.9612 [ ] dvb/sec.cpp:194 canTune ret1 10000
10:51:42.9612 [ ] dvb/sec.cpp:240 canTune [eDVBSatelliteEquipmentControl] ret5 10000
10:51:42.9612 [ ] dvb/sec.cpp:257 canTune [eDVBSatelliteEquipmentControl] ret 10000, score old 0
10:51:42.9612 [ ] dvb/sec.cpp:264 canTune [eDVBSatelliteEquipmentControl] score new 10000
10:51:42.9613 [ ] dvb/sec.cpp:279 canTune [eDVBSatelliteEquipmentControl] final score 9765
10:51:42.9613 [ ] dvb/sec.cpp:653 prepare [eDVBSatelliteEquipmentControl] Entry for 330,0? not in Rotor Table found... i try gotoXX?
10:51:42.9613 [ ] dvb/sec.cpp:666 prepare [eDVBSatelliteEquipmentControl] siteLatitude = 39,603001, siteLongitude = 3,383000, 330,000000 degrees
10:51:42.9614 [ ] dvb/sec.cpp:669 prepare [eDVBSatelliteEquipmentControl] PolarmountHourAngle=217,438662
10:51:42.9614 [ ] dvb/sec.cpp:699 prepare [eDVBSatelliteEquipmentControl] RotorCmd = d256
10:51:42.9614 [ ] dvb/sec.cpp:1056 prepare [eDVBSatelliteEquipmentControl] RotorCmd d256, lastRotorCmd d256
10:51:42.9614 [ ] dvb/frontend.cpp:3055 prepare_sat frontend 0 prepare_sat System 1 Freq 11700001 Pol 1 SR 1049 INV 2 FEC 0 orbpos 3300 system 1 modulation 1 pilot 2, rolloff 0, is_id -1, pls_mode 1, pls_code 0
10:51:42.9615 [ ] dvb/frontend.cpp:3061 prepare_sat tuning to 1100 MHz
10:51:42.9615 [ ] dvb/dvb.cpp:1890 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 tuning
10:51:42.9618 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set static current limiting
10:51:42.9619 [ ] dvb/frontend.cpp:2048 tuneLoopInt [SEC] tuner 0 setTone 1
10:51:42.9748 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 10ms
10:51:42.9849 [ ] dvb/frontend.cpp:2359 tuneLoopInt [SEC] update current switch params
10:51:42.9849 [ ] dvb/frontend.cpp:2113 tuneLoopInt [SEC] tuner 0 startTuneTimeout 20000
10:51:42.9849 [ ] dvb/frontend.cpp:2106 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
10:51:42.9850 [ ] dvb/frontend.cpp:2586 setFrontend setting frontend 0 events: on
10:51:42.9855 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
10:51:42.9855 [ ] dvb/frontend.cpp:2002 tuneLoopInt [eDVBFrontend] [SEC] tuner 0 sleep 500ms
10:51:43.4856 [ ] dvb/frontend.cpp:2400 tuneLoopInt [SEC] set dynamic current limiting
10:51:44.4618 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:45.9621 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:47.4624 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:48.9627 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:335 frontendStateChanged unhandled tuner state TUNING
10:51:49.2110 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 20, inversion off, m_tuning 2
10:51:49.2111 [ ] dvb/frontend.cpp:1108 feEvent [eDVBFrontend] FE_TIMEDOUT! ..abort
10:51:49.2111 [ E ] dvb/dvb.cpp:1918 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 failed, fatal
10:51:49.2355 [ ] dvb/frontend.cpp:1076 feEvent [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 0
10:51:49.2356 [ ] dvb/frontend.cpp:1118 feEvent [eDVBFrontend] stateLostLock
10:51:49.2356 [ ] dvb/dvb.cpp:1904 frontendStateChanged [eDVBChannel] OURSTATE: tuner 0 lost lock, unavailable now.
10:51:50.4637 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:284 frontendStateChanged CURRENT freq 11700000 4098/4098
10:51:50.4666 { } Screens/Screen.py:151 show [SCREENNAME] SetupSummary
10:51:50.4699 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:50.4706 { } Screens/Screen.py:151 show [SCREENNAME] ['Blindscan']
10:51:50.4709 { } Plugins/SystemPlugins/Blindscan/dmmBlindScan.py:183 satelliteTransponderSearchSessionClosed satelliteTransponderSearchSessionClosed, val (True,)
10:51:50.4735 { } skin.py:1501 readSkin [SKIN] processing screen MessageBox:
10:51:50.4748 { E } skin.py:1335 process_widget component with name 'WarningPixmap' was not found in skin of screen 'MessageBox'!
10:51:50.4829 { } skin.py:1251 readSkin [SKIN] Parsing embedded skin <embedded-in-'SimpleSummary'>
10:51:50.4835 { } skin.py:1501 readSkin [SKIN] processing screen <embedded-in-'SimpleSummary'>:
10:51:50.4851 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox_summary', 'SimpleSummary']
10:51:50.4864 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox']
10:51:53.2453 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 160 1
10:51:53.2464 { } Screens/InfoBarGenerics.py:202 actionA KEY: 352 0 KEY_OK OK
10:51:53.2467 { } Components/ActionMap.py:46 action [ActionMap] MsgBoxActions ok
10:51:53.2476 { } Screens/Screen.py:151 show [SCREENNAME] SetupSummary
10:51:53.2486 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:53.2489 { } Screens/Screen.py:151 show [SCREENNAME] ['Blindscan']
10:51:53.4170 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 0 160 1
10:51:53.4182 { } Screens/InfoBarGenerics.py:202 actionA KEY: 352 1 KEY_OK OK
10:51:53.4687 [ ] dvb/frontend.cpp:919 closeFrontend [eDVBFrontend] try to close frontend 0
10:51:57.8303 [ ] driver/rcinput.cpp:38 handleCode [eRCDeviceInputDev] 1 ae 1
10:51:57.8313 { } Screens/InfoBarGenerics.py:202 actionA KEY: 174 0 KEY_EXIT EXIT
10:51:57.8316 { } Components/ActionMap.py:46 action [ActionMap] SetupActions cancel
10:51:57.8317 { } Navigation.py:268 playService playing None
10:51:57.8335 { } Screens/Screen.py:151 show [SCREENNAME] MenuSummary
10:51:57.8344 [ ] dvb/dvbtime.cpp:369 syncDVBTime [eDVBLocalTimeHandler] sync local time with transponder time!
10:51:57.8349 { } Screens/Screen.py:151 show [SCREENNAME] ['menu_scan', 'Menu']
10:51:57.8362 { D } Traceback (most recent call last):
10:51:57.8363 { D } File "/usr/lib/enigma2/python/mytest.py", line 272, in processDelay
10:51:57.8374 { D } callback(*retval)
10:51:57.8374 { D } File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
10:51:57.8385 { D } TypeError: BlindscanCallback() takes exactly 2 arguments (1 given)
10:51:57.8385 [ E ] python/python.cpp:209 call [ePyObject] (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0xb06b4ee0>>,()) failed)
dmesg
<6>Booting Linux on physical CPU 0x0
<5>Linux version 4.4.35 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #2 SMP Mon Sep 10 16:43:28 CEST 2018
<6>CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
<6>CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<5>initmrd: found no initmrd.
<6>tag-emmc: emmc is not scaned!
<6>Machine model: Hisilicon
<6>cma: Reserved 48 MiB at 0x3bc00000
<6>cma: Reserved 4 MiB at 0x3fc00000
<6>Memory policy: Data cache writealloc
<7>-------------Fixed IO Mapping----------
<7>Virt, Phys, Size
<7>0xF9000000, 0xF8000000, 0x02000000
<7>--------------------------------------
<7>On node 0 totalpages: 262144
<7>free_area_init_node: node 0, pgdat c0b69480, node_mem_map dfbf9000
<7> Normal zone: 1032 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 132096 pages, LIFO batch:31
<7> HighMem zone: 130048 pages, LIFO batch:31
<6>PERCPU: Embedded 13 pages/cpu @dfbb5000 s22604 r8192 d22452 u53248
<7>pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096
<7>pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<6>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 261112
<5>Kernel command line: console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=8,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),1M(bootargs),1M(baseparam),1M(pqparam),1M(logo),1M(deviceinfo),8M(trustedcore),16M(kernel),226M(rootfs),-(others) mem=1G mmz=ddr,0,0,48M vmalloc=500M
<6>log_buf_len individual max cpu contribution: 4096 bytes
<6>log_buf_len total cpu_extra contributions: 12288 bytes
<6>log_buf_len min size: 16384 bytes
<6>log_buf_len: 32768 bytes
<6>early log buf free: 14388(87%)
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 963856K/1048576K available (7783K kernel code, 588K rwdata, 2220K rodata, 536K init, 537K bss, 31472K reserved, 53248K cma-reserved, 456692K highmem)
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5> vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
<5> lowmem : 0xc0000000 - 0xe0400000 ( 516 MB)
<5> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5> modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
<5> .text : 0xc0008000 - 0xc07a214c (7785 kB)
<5> .init : 0xc0a68000 - 0xc0aee000 ( 536 kB)
<5> .data : 0xc0aee000 - 0xc0b81320 ( 589 kB)
<5> .bss : 0xc0b83000 - 0xc0c0940c ( 538 kB)
<6>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>Hierarchical RCU implementation.
<6> Build-time adjustment of leaf fanout to 32.
<6>NR_IRQS:352
<6>clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
<6>Console: colour dummy device 80x30
<6>Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>CPU: Testing write buffer coherency: ok
<6>ftrace: allocating 26587 entries in 78 pages
<6>CPU0: update cpu_capacity 1024
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>Setting up static identity map for 0x8280 - 0x82d8
<4>CPU: hi3798mv200
<7>CPU1: powerup
<6>CPU1: update cpu_capacity 1024
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<7>CPU2: powerup
<6>CPU2: update cpu_capacity 1024
<6>CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<7>CPU3: powerup
<6>CPU3: update cpu_capacity 1024
<6>CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>Brought up 4 CPUs
<6>SMP: Total of 4 processors activated (12681.21 BogoMIPS).
<6>CPU: All CPU(s) started in SVC mode.
<6>CPU3: update max cpu_capacity 1024
<6>devtmpfs: initialized
<6>VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
<6>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>NET: Registered protocol family 16
<6>DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>CPU2: update max cpu_capacity 1024
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>Serial: AMBA PL011 UART driver
<6>f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2
<6>console [ttyAMA0] enabled
<6>f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2
<6>f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2
<6>pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
<6>pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
<6>pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
<6>pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
<6>pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
<6>pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
<6>pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
<6>pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
<6>pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
<6>pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
<4>hisilicon-pcie: probe of f0001000.pcie failed with error -1
<6>hisi_iommu_ptable_addr:phy 0x1e800000 size:0x400000
<6>hisi_iommu_err_rdaddr :phy 0x1f7c7200 size:0x200
<6>hisi_iommu_err_wraddr :phy 0x1f7c7400 size:0x200
<6>in hisi_iommu_domain_init start
<6>in hisi_iommu_domain_init end
<6>vgaarb: loaded
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
<6>ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
<6>spi_master spi0: will run message pump with realtime priority
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>media: Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Initialized.
<6>clocksource: Switched to clocksource hisp804
<5>FS-Cache: Loaded
<6>NET: Registered protocol family 2
<6>TCP established hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>PCI: CLS 0 bytes, default 64
<6>NetWinder Floating Point Emulator V0.97 (double precision)
<6>hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
<6>futex hash table entries: 1024 (order: 4, 65536 bytes)
<5>VFS: Disk quotas dquot_6.6.0
<6>VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>Installing knfsd (copyright (C) 1996 [email protected]).
<5>FS-Cache: Netfs 'cifs' registered for caching
<6>jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
<6>fuse init (API version 7.23)
<7>yaffs: yaffs built Installing.
<6>bounce: pool size: 64 pages
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>io scheduler noop registered
<6>io scheduler deadline registered (default)
<6>io scheduler cfq registered
<6>hiahci-phy: registered new sata phy driver
<6>brd: module loaded
<6>loop: module loaded
<6>hifmc100: registerd new interface driver hifmc100.
<5>hifmc100: Found flash memory controller hifmc100.
<6>hifmc100: no found spi-nor device.
<6>nand: id: 0x01 0xDA 0x90 0x95 0x44 0x01 0xDA 0x90
<6>nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
<6>nand: AMD/Spansion NAND 256MiB 3,3V 8-bit
<6>nand: Block:128KB Page:2KB OOB:64B ECC:4bits/512 Chip:256MB
<6>flashcache: initialize nand flash cache feature.
<6>flashstats: Create nand flash statistics interface.
<6>flashstats: nand:-read,-write,-erase,-ecc,
<4>mtd: hinand: skipping zero sized partition
<5>9 cmdlinepart partitions found on MTD device hinand
<5>Creating 9 MTD partitions on "hinand":
<5>0x000000000000-0x000000100000 : "boot"
<5>0x000000100000-0x000000200000 : "bootargs"
<5>0x000000200000-0x000000300000 : "baseparam"
<5>0x000000300000-0x000000400000 : "pqparam"
<5>0x000000400000-0x000000500000 : "logo"
<5>0x000000500000-0x000000600000 : "deviceinfo"
<5>0x000000600000-0x000000e00000 : "trustedcore"
<5>0x000000e00000-0x000001e00000 : "kernel"
<5>0x000001e00000-0x000010000000 : "rootfs"
<6>mtd-regop: Create nand register operation interface, buffer size:8566
<6>hifmc100: no found spi-nand device.
<6>FEPHY:addr=2, la_am=0xd, ldo_am=0x4, r_tuning=0x14
<6>libphy: himii: probed
<6>hieth: attached port 0 PHY 2 to driver HiSilicon Festa v330
<6>libphy: higmac_mii_bus: probed
<6>No eth phy found at address 3
<6>PPP generic driver version 2.4.2
<6>PPP BSD Compression module registered
<6>PPP Deflate Compression module registered
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ehci-pci: EHCI PCI platform driver
<6>ehci-platform: EHCI generic platform driver
<6>ehci-platform f9890000.ehci: EHCI Host Controller
<6>ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
<6>ehci-platform f9890000.ehci: irq 33, io mem 0xf9890000
<6>ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>ohci-pci: OHCI PCI platform driver
<6>ohci-platform: OHCI generic platform driver
<6>ohci-platform f9880000.ohci: Generic Platform OHCI controller
<6>ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
<6>ohci-platform f9880000.ohci: irq 34, io mem 0xf9880000
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
<6>xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
<6>xhci-hcd f98a0000.xhci: irq 36, io mem 0xf98a0000
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
<6>xhci-hcd f98a0000.xhci: xHCI Host Controller
<6>xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
<6>usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
<6>usbcore: registered new interface driver uas
<6>usbcore: registered new interface driver usb-storage
<6>usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial support registered for generic
<6>mousedev: PS/2 mouse device common for all mice
<6>usbcore: registered new interface driver xpad
<6>i2c /dev entries driver
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (1.1.1)
<6>sp805-wdt f8a2c000.watchdog: registration successful
<4>registered new interface driver himciV2.0_4.4.35_20170401
<6>usb 3-1: new high-speed USB device number 2 using xhci-hcd
<4>usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
<4>usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
<6>usb-storage 3-1:1.0: USB Mass Storage device detected
<6>scsi host0: usb-storage 3-1:1.0
<6>usb 2-2: new full-speed USB device number 2 using ohci-platform
<5>f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>ashmem: initialized
<6>usbcore: registered new interface driver snd-usb-audio
<6>oprofile: using timer interrupt.
<6>Netfilter messages via NETLINK v0.30.
<6>nfnl_acct: registering with nfnetlink.
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>NET: Registered protocol family 10
<6>NET: Registered protocol family 17
<5>Key type dns_resolver registered
<5>Registering SWP/SWPB emulation handler
<5>ubi0: default fastmap pool size: 90
<5>ubi0: default fastmap WL pool size: 45
<5>ubi0: attaching mtd8
<6>mmc0: new high speed SDHC card at address 59b4
<6>mmcblk0: mmc0:59b4 USDU1 14.7 GiB
<6> mmcblk0: p1
<5>random: nonblocking pool is initialized
<5>ubi0: scanning is finished
<5>ubi0: attached mtd8 (name "rootfs", size 226 MiB)
<5>ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>ubi0: good PEBs: 1808, bad PEBs: 0, corrupted PEBs: 0
<5>ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>ubi0: max/mean erase counter: 2/0, WL threshold: 128, image sequence number: 651212310
<5>ubi0: available PEBs: 0, total reserved PEBs: 1808, PEBs reserved for bad PEB handling: 40
<5>ubi0: background thread "ubi_bgt0d" started, PID 910
<6>ALSA device list:
<6> No soundcards found.
<5>UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 912
<5>UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>UBIFS (ubi0:0): FS size: 222334976 bytes (212 MiB, 1751 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 4ECF3C32-04AC-4AAF-BFB2-C3D148CAFAB2, small LPT model
<6>VFS: Mounted root (ubifs filesystem) on device 0:14.
<6>devtmpfs: mounted
<6>Freeing unused kernel memory: 536K (c0a68000 - c0aee000)
<4>This architecture does not have kernel memory protection.
<5>scsi 0:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
<5>sd 0:0:0:0: [sda] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
<5>sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 45 00 00 00
<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1
<5>sd 0:0:0:0: [sda] Attached SCSI removable disk
<4>FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
<6>usbcore: registered new interface driver tpm
<6>HI_DRV_SPI_Init success
<6>hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
<4>spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<4>hi_spi spi0.0: invalid chip select
<6>input: dreambox advanced remote control (native) as /devices/virtual/input/input0
<6>DVB: registering new adapter (dvb0)
<6>platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>input: front panel as /devices/virtual/input/input1
<4>Mali: Mali device driver loaded
<6>SGI XFS with ACLs, security attributes, realtime, no debug enabled
<6>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>hieth f9c30000.hieth eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<6>sh (1790): drop_caches: 3
<6>sh (1799): drop_caches: 3
- No funciona correctamente con lnb unicable (usado para pruebas inverto II 32 src), se pierde señal tras reinicio completo, siendo necesario entrar en opciones de menu sintonizacion y volver al canal para recuperar, es como si se perdiera la alimentacion del lnb)
- Al realizar zapeo entre un canal y otro se ralentiza la imagen durante 2-3 segundos.
- Bastante perdida de señal entre el tuner y tuner de otros receptores (ya no tanto en lo que muestra de nivel de señal que puede ser engañoso), si no canales que se visionan sin mucha señal en este receptor no se reciben, ignoro si es del propio tuner o de los drivers del mismo
- Al realizar zapeo entre canal la señal del canal no se muestra directamente (probado tanto con lnb unicable como con lnb universal), lo hace como en dos pasos (primero muestra 44/49% y luego ya muestra la señal del canal.
- Problema reproduccion peliculas HEVC-UHD audio AC3, que en otros receptores no ocurre (mismo test video probado en gigablue quad 4k), no llega a empezar la reproduccion.
https://www.dropbox.com/s/7ovcr24c1zid7nq/Interstellar-divx-hevc-uhd-51ch-4K.mkv?dl=0
https://www.dropbox.com/s/undmlkbpg8rdnql/KAZU_(SUBTITLES)_4K23.98p_HEVC_10Mbits.mkv?dl=0
Sobre todo los 4 primeros puntos si me parece importante que tengan solucion.
Última edición:
