Home

Petición Driver RTL2832u + R820T2

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Hola, tengo un tdt usb RTL2832u + R820T2, lo usaba en windows y no me encontraba ningún canal, al final resulto que el driver que tenia puesto era para R820T, en cuanto lo cambié, funcionó correctamente, pues bien tengo un Zgemma Star H.2s y me pasa exactamente lo mismo cuando instalo el driver desde opensap 6.0003, me lo reconoce pero no encuentra canales.
Asi que, alguien sería tan amable de pasarme el driver para R820T2? Gracias.
 

darkmantk

OpenSpa Team
Miembro del equipo
26 Ago 2009
8.533
2.648
0
Escríbenos que te devuelve al escribir por telnet:

lsmod

Es para saber el ID del pendrive para ver si está en el kernel.
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Sale esto
Sin%20t%C3%ADtulo2.jpg
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Sale esto

Module Size Used by
ipv6 384367 49
r820t 18694 1
rtl2832 10987 1
dvb_usb_rtl28xxu 16231 2
dvb_usb_v2 14943 1 dvb_usb_rtl28xxu
mt7601Usta 845311 1
boxmodel 868 0
xfs 695462 0
libcrc32c 714 1 xfs
h3 7366082 29
h3_3 33009 1 h3
h3_2 22287 0
h3_1 6541 3 h3,h3_2,h3_3
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Pues con eso pone

Bus 001 Device 002: ID 148f:7601
Bus 001 Device 003: ID 05e3:0608
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 004: ID 0bda:2838
Bus 001 Device 005: ID 04a3:0101
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
con dmeg me salen muchas lineas como esta

RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...

y esto
32
AsicAddSharedKeyEntry BssIndex=0, KeyIdx=2
AsicAddSharedKeyEntry: TKIP key #2
Key = a3:1c:7b:be:24:58:f9:b6:c6:bc:2d:48:53:75:8e:df
Rx MIC Key = 3a:ca:9d:12:23:6b:f8:f7
Tx MIC Key = 90:5e:f0:f8:34:13:f3:aa
Read: SHARED_KEY_MODE_BAS

y con opkg list-installed | grep rtl

enigma2-plugin-drivers-dvb-usb-rtl2832 - 1.0-r2
enigma2-plugin-drivers-network-usb-rtl8187 - 1.0-r2
enigma2-plugin-drivers-network-usb-rtl8192cu - 1.0-r3
firmware-rtl8192cu - 1.0-r0
firmware-rtl8712u - 1.0-r0
kernel-module-dvb-usb-rtl28xxu - 4.0.1-r0.1
kernel-module-rtl2832 - 4.0.1-r0.1
kernel-module-rtl8187 - 4.0.1-r0.1
rtl8192cu - 4.0.2-r4
 

darkmantk

OpenSpa Team
Miembro del equipo
26 Ago 2009
8.533
2.648
0
El dmesg tienes que hacerlo recién iniciado el deco, porque ahi se ve lo que carga para el tdt
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
ESO?


Last login: Sat Jul 23 19:45:51 CEST 2016 on pts/0
root@zgemmah2s:~# dmesg
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
remove none key #0
AsicRemoveSharedKeyEntry: #0
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #1
AsicRemoveSharedKeyEntry: #1
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #2
AsicRemoveSharedKeyEntry: #2
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #3
AsicRemoveSharedKeyEntry: #3
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
ASSOC - Send ASSOC request...
PeerAssocReqSanity - IE_EXT_CAPABILITY!
PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=0)
PeerAssocRspAction():MacTable [255].AMsduSize = 0. ClientStatusFlags = 0x0
AssocPostProc():=>AP.AMsduSize = 0. ClientStatusFlags = 0x1
AssocPostProc():=>(Mmps=0, AmsduSize=0, )
AssocPostProc():=> Store RSN_IE for WPA2 SM negotiation
RSN_IE: e1f29f43, len = 22
0x0000 : 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00
0x0010 : 00 0f ac 02 00 00
!!!Infra LINK UP !!!
!!! LINK UP !!! (BssType=1, AID=1, ssid=Lucky2, Channel=6, CentralChannel = 6)
!!! LINK UP !!! (Density =0, )
===> AsicSetBssid e2:41:36:0:7b:90
MediaState is connected
EDCA [#0]: AIFSN CWmin CWmax TXOP(us) ACM
AC_BE 3 4 10 0 0
AC_BK 7 4 10 0 0
AC_VI 2 3 4 3008 0
AC_VO 2 2 3 1504 0
NDIS_STATUS_MEDIA_DISCONNECT Event AA!
ComposePsPoll
--->AsicEnableBssSync(INFRA mode)
!!! LINK UP !!! ClientStatusFlags=1)
MlmeUpdateTxRates():[MaxSupport = 54] = MaxDesire 54 Mbps
MlmeUpdateTxRates(): (MaxDesire=54, MaxSupport=54, MaxTxRate=54, MinRate=1, Rate Switching =1)
MlmeUpdateTxRates(): (TxRate=24, RtsRate=24, BasicRateBitmap=0x015f)
MlmeUpdateTxRates(): (MlmeTransmit=0x0, MinHTPhyMode=0, MaxHTPhyMode=0x4004, HTPhyMode=0x4004)
MlmeUpdateHtTxRates()===>
!!! LINK UP !! (StaActive.bHtEnable =0)
NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = 3234040. ClientStatusFlags = 100001
Txburst 2
!!!pAd->bNextDisableRxBA= 0
not supports 20/40 BSS COEX !!!
pAd->CommonCfg Info: bBssCoexEnable=1, Channel=6, CentralChannel=6, PhyMode=14
pAd->StaActive.SupportedHtPhy.bHtEnable=0
pAd->MlmeAux.ExtCapInfo.BssCoexstSup=0
TX DPD Calibration
CNTL - Association successful on BSS #0
Receive EAPOL-Key frame, TYPE = 3, Length = 95
MediaState is connected
Receive EAPOL-Key frame, TYPE = 3, Length = 157
RtmpIoctl_rt_ioctl_siwencodeext::DefaultKeyId = 0
RtmpIoctl_rt_ioctl_siwencodeext::IW_ENCODE_ALG_TKIP - keyIdx = 0, ext->key_len = 32
AsicAddPairwiseKeyEntry: WCID #1 Alg=TKIP
Key = 93:dd:0a:99:98:12:f3:02:c6:f7:4c:07:b0:02:7b:29
Rx MIC Key = 07:30:0d:85:2b:4a:e7:3c
Tx MIC Key = 24:3e:ee:1e:14:20:3d:b5
AsicUpdateWCIDIVEIV: wcid(1) 0x20000001, 0x00000000
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=TKIP
WCIDAttri = 0x7
RtmpIoctl_rt_ioctl_siwencodeext::IW_ENCODE_ALG_TKIP - keyIdx = 1, ext->key_len = 32
AsicAddSharedKeyEntry BssIndex=0, KeyIdx=1
AsicAddSharedKeyEntry: TKIP key #1
Key = 90:23:de:68:bb:5d:86:2c:ed:59:98:20:87:38:09:e3
Rx MIC Key = 18:f7:1b:6d:44:23:e7:19
Tx MIC Key = df:9a:6f:fc:a5:1b:4e:1e
Read: SHARED_KEY_MODE_BASE at this Bss[0] KeyIdx[1]= 0x0
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x30
NET: Registered protocol family 10
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Pues esto me sale en el archivo que me as dicho.

BuildChannel # 1 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 2 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 3 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 4 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 5 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 6 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 7 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 8 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 9 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 10 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 11 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 12 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 13 :: Pwr0 = 1, Pwr1 =0, Flags = 0
BuildChannel # 14 :: Pwr0 = 1, Pwr1 =0, Flags = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
RTMPSetHT : HT_mode(0), ExtOffset(3), MCS(33), BW(1), STBC(0), SHORTGI(1)
RTMPSetHT : RxBAWinLimit = 64
RTMPSetHT : AMsduSize = 0, MimoPs = 3, MpduDensity = 4, MaxRAmpduFactor = 2
EDCA [#0]: AIFSN CWmin CWmax TXOP(us) ACM
AC_BE 3 4 6 0 0
AC_BK 7 4 10 0 0
AC_VI 1 3 4 3008 0
AC_VO 1 2 3 1504 0
RTMPSetIndividualHT : Desired MCS = 33
MlmeUpdateHtTxRates()===>
MlmeUpdateHtTxRates():<---.AMsduSize = 0
TX: MCS[0] = ff (choose 7), BW = 1, ShortGI = 1, MODE = 2,
MlmeUpdateHtTxRates():<===
MCS Set = ff 00 00 00 01
NDIS_STATUS_MEDIA_DISCONNECT Event B!
RTUSBBulkReceive!
==> RTMPEnableRxTx
==> DMAIdle, GloCfg=0x40000050
0x1300 = 00064300
RTMPDrvOpen(1):Check if PDMA is idle!
==> DMAIdle, GloCfg=0x40000050
Driver auto reconnect to last OID_802_11_SSID setting - 11n-AP, len - 6
RTMPDrvOpen(2):Check if PDMA is idle!
CntlOidSsidProc():CNTL - 0 BSS of 0 BSS match the desire (6)SSID - 11n-AP
CNTL - All roaming failed, restore to channel 1, Total BSS[00]
==> DMAIdle, GloCfg=0x40000050
===> rt_ioctl_siwpmksa
rt_ioctl_siwpmksa - IW_PMKSA_FLUSH
===>Set_NetworkType_Proc::(INFRA)
Set_NetworkType_Proc::(NetworkType=1)
===>rt_ioctl_giwrange
==>rt_ioctl_giwmode(mode=0)
rt_ioctl_siwauth::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = 1)
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_WPA_ENABLED - Driver supports WPA!(param->value = 1)
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=none
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
AsicRemoveSharedKeyEntry: #0
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
RtmpIoctl_rt_ioctl_siwencodeext::Remove all keys!
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=none
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
AsicRemoveSharedKeyEntry: #1
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
RtmpIoctl_rt_ioctl_siwencodeext::Remove all keys!
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=none
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
AsicRemoveSharedKeyEntry: #2
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
RtmpIoctl_rt_ioctl_siwencodeext::Remove all keys!
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=none
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
AsicRemoveSharedKeyEntry: #3
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
RtmpIoctl_rt_ioctl_siwencodeext::Remove all keys!
rt_ioctl_siwauth::IW_AUTH_TKIP_COUNTERMEASURES -(param->value = 0)
===> rt_ioctl_siwpmksa
rt_ioctl_siwpmksa - IW_PMKSA_FLUSH
SCANNING, suspend MSDU transmission ...
SYNC - BBP R4 to 20MHz.l
MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#2(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#3(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#4(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#5(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#6(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#7(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#8(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#9(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#10(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#11(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#12(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#13(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#14(RF=15, 1T)
MT7601_ChipSwitchChannel: SwitchChannel#1(RF=15, 1T)
SYNC - End of SCAN, restore to 20MHz channel 1, Total BSS[15]
SCAN done, resume MSDU transmission ...
CNTL - All roaming failed, restore to channel 1, Total BSS[15]
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 2545
rt_ioctl_siwauth::IW_AUTH_DROP_UNENCRYPTED - param->value = 1!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_DROP_UNENCRYPTED - param->value = 1!
rt_ioctl_siwauth::IW_AUTH_80211_AUTH_ALG - param->value = 1!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_80211_AUTH_ALG - param->value = 130!
===>Set_NetworkType_Proc::(INFRA)
Set_NetworkType_Proc::(NetworkType=1)
===> rt_ioctl_siwgenie
rt_ioctl_siwauth::IW_AUTH_WPA_VERSION - param->value = 4!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_WPA_VERSION - param->value = 18!
rt_ioctl_siwauth::IW_AUTH_CIPHER_PAIRWISE - param->value = 4!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_CIPHER_PAIRWISE - param->value = 36!
rt_ioctl_siwauth::IW_AUTH_CIPHER_GROUP - param->value = 4!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_CIPHER_GROUP - param->value = 52!
rt_ioctl_siwauth::IW_AUTH_KEY_MGMT - param->value = 2!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_KEY_MGMT - param->value = 2!
rt_ioctl_siwauth::IW_AUTH_PRIVACY_INVOKED - param->value = 1!
RtmpIoctl_rt_ioctl_siwauth::IW_AUTH_PRIVACY_INVOKED - param->value = 1!
==>rt_ioctl_siwfreq::SIOCSIWFREQ(Channel=6)
Set_SSID_Proc::(Len=6,Ssid=Lucky2)
IOCTL::SIOCSIWAP e2:41:36:00:7b:90
CntlOidSsidProc():CNTL - 1 BSS of 15 BSS match the desire (6)SSID - Lucky2
CNTL - iterate BSS 0 of 1
SYNC - MlmeJoinReqAction(BSS #0)
MlmeJoinReqAction(): Set BBP BW=20MHz
MT7601_ChipSwitchChannel: SwitchChannel#6(RF=15, 1T)
SYNC - Switch to ch 6, Wait BEACON from e2:41:36:00:7b:90
PeerBeaconAtJoinAction():receive desired BEACON,Channel=6
MlmeAux.ExtCapInfo=0
PeerBeaconAtJoinAction(): Set CentralChannel=6
RTMPUpdateMlmeRate ==> MlmeTransmit = 0x0
PeerBeaconAtJoinAction(): - after JOIN, SupRateLen=8, ExtRateLen=4
AdjustChannelRelatedValue():CentralChannel=6, Channel=6, ChannelWidth=0
MT7601_ChipSwitchChannel: SwitchChannel#6(RF=15, 1T)
AdjustChannelRelatedValue():BW_20, RF-Ch=6, CtrlCh=6, HT-CentralCh=6
AdjustChannelRelatedValue ==> not any connection !!!
AUTH - Send AUTH request seq#1 (Alg=0)...
AUTH - Receive AUTH_RSP seq#2 to me (Alg=0, Status=0)
CNTL - AUTH OK
RTMPWPARemoveAllKeys(AuthMode=7, WepStatus=4)
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=none
WCIDAttri = 0x1
AsicRemovePairwiseKeyEntry : Wcid #1
remove none key #0
AsicRemoveSharedKeyEntry: #0
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #1
AsicRemoveSharedKeyEntry: #1
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #2
AsicRemoveSharedKeyEntry: #2
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
remove none key #3
AsicRemoveSharedKeyEntry: #3
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x0
ASSOC - Send ASSOC request...
PeerAssocReqSanity - IE_EXT_CAPABILITY!
PeerAssocRspAction():ASSOC - receive ASSOC_RSP to me (status=0)
PeerAssocRspAction():MacTable [255].AMsduSize = 0. ClientStatusFlags = 0x0
AssocPostProc():=>AP.AMsduSize = 0. ClientStatusFlags = 0x1
AssocPostProc():=>(Mmps=0, AmsduSize=0, )
AssocPostProc():=> Store RSN_IE for WPA2 SM negotiation
RSN_IE: e1f29f43, len = 22
0x0000 : 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00
0x0010 : 00 0f ac 02 00 00
!!!Infra LINK UP !!!
!!! LINK UP !!! (BssType=1, AID=2, ssid=Lucky2, Channel=6, CentralChannel = 6)
!!! LINK UP !!! (Density =0, )
===> AsicSetBssid e2:41:36:0:7b:90
MediaState is connected
EDCA [#0]: AIFSN CWmin CWmax TXOP(us) ACM
AC_BE 3 4 10 0 0
AC_BK 7 4 10 0 0
AC_VI 2 3 4 3008 0
AC_VO 2 2 3 1504 0
NDIS_STATUS_MEDIA_DISCONNECT Event AA!
ComposePsPoll
--->AsicEnableBssSync(INFRA mode)
!!! LINK UP !!! ClientStatusFlags=1)
MlmeUpdateTxRates():[MaxSupport = 54] = MaxDesire 54 Mbps
MlmeUpdateTxRates(): (MaxDesire=54, MaxSupport=54, MaxTxRate=54, MinRate=1, Rate Switching =1)
MlmeUpdateTxRates(): (TxRate=24, RtsRate=24, BasicRateBitmap=0x015f)
MlmeUpdateTxRates(): (MlmeTransmit=0x0, MinHTPhyMode=0, MaxHTPhyMode=0x4004, HTPhyMode=0x4004)
MlmeUpdateHtTxRates()===>
!!! LINK UP !! (StaActive.bHtEnable =0)
NDIS_STATUS_MEDIA_CONNECT Event B!.BACapability = 3234040. ClientStatusFlags = 100001
Txburst 2
!!!pAd->bNextDisableRxBA= 0
not supports 20/40 BSS COEX !!!
pAd->CommonCfg Info: bBssCoexEnable=1, Channel=6, CentralChannel=6, PhyMode=14
pAd->StaActive.SupportedHtPhy.bHtEnable=0
pAd->MlmeAux.ExtCapInfo.BssCoexstSup=0
TX DPD Calibration
CNTL - Association successful on BSS #0
Receive EAPOL-Key frame, TYPE = 3, Length = 95
MediaState is connected
Receive EAPOL-Key frame, TYPE = 3, Length = 157
RtmpIoctl_rt_ioctl_siwencodeext::DefaultKeyId = 0
RtmpIoctl_rt_ioctl_siwencodeext::IW_ENCODE_ALG_TKIP - keyIdx = 0, ext->key_len = 32
AsicAddPairwiseKeyEntry: WCID #1 Alg=TKIP
Key = b4:04:a2:4e:75:77:72:34:9d:cf:05:28:ce:40:6d:03
Rx MIC Key = 5d:9e:85:e7:18:ec:e4:81
Tx MIC Key = 41:7c:3a:00:a2:d5:dc:59
AsicUpdateWCIDIVEIV: wcid(1) 0x20000001, 0x00000000
AsicUpdateWcidAttributeEntry : WCID #1, KeyIndex #0, Alg=TKIP
WCIDAttri = 0x7
RtmpIoctl_rt_ioctl_siwencodeext::IW_ENCODE_ALG_TKIP - keyIdx = 2, ext->key_len = 32
AsicAddSharedKeyEntry BssIndex=0, KeyIdx=2
AsicAddSharedKeyEntry: TKIP key #2
Key = 49:39:48:64:f9:30:72:5a:43:4d:7c:5e:60:b9:95:d2
Rx MIC Key = a2:dc:2b:f1:03:62:23:1e
Tx MIC Key = a8:e6:3e:71:34:10:c7:7c
Read: SHARED_KEY_MODE_BASE at this Bss[0] KeyIdx[2]= 0x0
Write: SHARED_KEY_MODE_BASE at this Bss[0] = 0x300
NET: Registered protocol family 10
IPv6: wlan0: IPv6 duplicate address fe80::236:76ff:feb0:647c detected!
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
usb 1-2.2: dvb_usb_v2: rc.query() failed=-71
r820t 8-001a: r820t_write: i2c wr failed=-71 reg=15 len=1: 00
platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)...
rtl2832 7-0010: i2c reg read failed -71
rtl2832 7-0010: i2c reg read failed -71
rtl2832 7-0010: i2c reg read failed -71
r820t 8-001a: r820t_write: i2c wr failed=-71 reg=05 len=1: 83
rtl2832 7-0010: i2c reg read failed -71
rtl2832 7-0010: i2c reg read failed -71
usb 1-2.2: USB disconnect, device number 4
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
sh (651): drop_caches: 3
sh (671): drop_caches: 3
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
RtmpUSBNullFrameKickOut - Send NULL Frame @24 Mbps...
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Espero haber puesto bien la información que me habéis pedido.
Entonces, alguna idea para poder instalarlo correctamente? y muchas gracias.
 

azote

Usuario Destacado
Vip OpenSPA
3 Feb 2015
299
47
0
55
Hola. Como quedó esto?
A mi me pasal omismoconeste pincho tdt. Que aparece como sintonizador, pero no busca canales
saludos al foro
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Nada, sigue sin funcionar, pero lo que no se es si están haciendo un driver adecuado o no, por que me pidieron toda esa información pero ya no han dicho nada. de momento ya e probado otros dos tdt con el chip RTL2832u y nada, y e visto en un foro uno que se supone que si funciona por unos 12€,con el chip RTL2832u también, que lo he pedido pero hasta dentro de 20 o 30 días no me llega. ya diré algo cuando lo tenga.
 

darkmantk

OpenSpa Team
Miembro del equipo
26 Ago 2009
8.533
2.648
0
Por ahora es imposible hacer funcionar este pincho, no existe el driver para el r820t2 por eso no te funciona.
 

azote

Usuario Destacado
Vip OpenSPA
3 Feb 2015
299
47
0
55
Hola. En la pagina de descargas de zgemma punto tv en el apartado del h.s. esta la descarga de kernels. Ahi esta tambien el archivo kernel-module-r820t_4.0.1-r0.2_h3.ipk que en teoria es el driver para el chip silicon que monta este pincho.
Aun no le he probado, pero podria ser la solucion. A
a ver si conseguimos algo
saludos
 

darkmantk

OpenSpa Team
Miembro del equipo
26 Ago 2009
8.533
2.648
0
Hola. En la pagina de descargas de zgemma punto tv en el apartado del h.s. esta la descarga de kernels. Ahi esta tambien el archivo kernel-module-r820t_4.0.1-r0.2_h3.ipk que en teoria es el driver para el chip silicon que monta este pincho.
Aun no le he probado, pero podria ser la solucion. A
a ver si conseguimos algo
saludos
No, ese es la versión 1, él necesita el r820t2 que lo he estado buscando y no hay nada.
 

Planchass

Openspa VIP
Vip OpenSPA
7 May 2016
231
13
0
Pero tambien consegui un pincho diferente con R820T y me pasaba exactamente lo mismo
 

Tururu

Ensamblado con piezas recicladas y el 17-9-2017 KO
Miembro del equipo
Moderador OpenSPA
Pero tambien consegui un pincho diferente con R820T y me pasaba exactamente lo mismo
.
Con RTL2832+R820T el driver que se baja/esta en los decos con OpenSpa funciona muy bien.
Verifica de verdad que tienes, que no este averiado instalando en un PC y verifica que funciona...bien.

La ultima vez que charlamos del tema (11-7-2016 TDT usb en otro foro), en el PC/deco un pincho RTL2832+R820T no te funciono, por eso el cambio por el nuevo RTL2832+R820T2.
Donde te avise de la diferencia de driver que necesita cada pincho al ser diferentes (el chip del tuner).
El primero R820T parece que esta averiado.
El segundo R820T2 no sintoniza canales al tener otro tuner distinto, en los 2 casos, el sintoma es similar, no sintoniza canales.
Aclara si es el mismo pincho averiado el primero.? Curiosidad.
a6775.gif

Planchass dijo:
Os cuento, como os dije tenia un sintonizador que resulto ser el RTL2832U + R820T SDR Negro, y lo conseguí instalar en enigma2 y windows pero no sintonizaba ningún canal, así que pedí la devolución y me la han hecho, pero no a hecho falta que devuelva el producto, y ahora e comprado el RTL2832U + R820T2 SDR azul y me pasa exactamente lo mismo, los dos los pongo en 8Mhz y me pone que no hay señal, tanto con la antena que viene con los sintonizadores, como conectándolos a la antena colectiva de mi casa.
Los problemas de antena los descarto porque en windows llevo utilizando otro sintonizador bastante tiempo, el august t202, y funciona perfectamente.
Así que no se donde puede estar el problema, alguna idea? por favor.
Planchass dijo:
vale, e conseguido que funcione en windows el RTL2832U + R820T2 SDR era problema de los drivers, tenia instalados los de R820T, entonces supongo que en enigma2 me pasara lo mismo, alguien sabe donde encontrar lo driver para la versión R820T2?

El primero parece averiado, tampoco funciona en el PC y claro, no sintoniza canales.
El segundo en el PC funciona bien con sus driver, pero en el deco no al no tener driver para el nuevo chip del tuner R820T2.
Los 2 presentan un sintoma similar, no sintonizan canales.

Esperemos que alguien se curre los driver necesarios para los decos.
PD: Si es otro tuner TDT-USB RTL2832+R820T disculpa, no entiendo la busqueda, suerte.
a5995.gif