Ustym 4K PRO Driver realtek RTL8812AU

[malk1101]

Versión de OpenSpa: 8.0.001

Descripción del fallo: Al actualizar a 8.0.001 ha dejado de funcionar el USB con chip RTL8812AU. el stick usb es el CSL-AC1200 WLAN Stick Dual Band-2.4 GHz 5 GHz.. No lo detecta. Tengo dos receptores Ustym 4K PRO y en los dos pasa igual.

Características especiales: No

Se adjunta Crash-log: No

 

[juanismo]

En descargas openSPA tienes el driver exacto para tu chip, prueba a instalarlo

 

[malk1101]

El driver viene instalado de serie en la imagen. Igualmente he desinstalado y vuelto a instalar con el mismo rsultado.
gracias por el aporte igualmente.

 

[evox]

Necesitamos que hagas lo siguiente, apaga completamente el deco y conecta el usb-wifi, luego enciendes y cuando termine de arrancar envias por telnet este comando
dmesg --> /tmp/dmesg.txt
Luego por ftp te descargas el archivo dmesg.txt que tendras en la carpeta /tmp y nos lo adjuntas.

Salu2

 

[evox]

Versión de OpenSpa: 8.0.001

Descripción del fallo: Al actualizar a 8.0.001 ha dejado de funcionar el USB con chip RTL8812AU. el stick usb es el CSL-AC1200 WLAN Stick Dual Band-2.4 GHz 5 GHz.. No lo detecta. Tengo dos receptores Ustym 4K PRO y en los dos pasa igual.

Características especiales: No

Se adjunta Crash-log: No

Encontre entre mis trastos un RTL8812au y tras probarlo en el Uclan Ustym 4K PRO y Octagon SF8008 la conclusion es que funciona sin problemas.



El problema biene si conectas el USB-wifi al puerto 3.0, en ese por algun motivo no lo detecta, pero en el puerto trasero 2.0 funciona sin problemas y a mi me da 436mb sin ponerle la antena.

Prueba y nos cuentas, el adaptador que he probado es este

https://www.amazon.es/Gigablue-Adaptador-wi-fi-wlan-600mbit/dp/B01JK62QAG

ID USB 0bda:0811
Class ff-ff-ff »
Type net/wireless »
Vendor Realtek Semiconductor »
Name Realtek 8812AU/8821AU 802.11ac WLAN Adapter [USB Wireless Dual-Band Adapter 2.4/5Ghz]
Subsystem Realtek

Envia el comando lsusb por telnet y ponme lo que te responde, por comparar.

Salu2.

 

[malk1101]

Encontre entre mis trastos un RTL8812au y tras probarlo en el Uclan Ustym 4K PRO y Octagon SF8008 la conclusion es que funciona sin problemas.

Ver el adjunto 28487

El problema biene si conectas el USB-wifi al puerto 3.0, en ese por algun motivo no lo detecta, pero en el puerto trasero 2.0 funciona sin problemas y a mi me da 436mb sin ponerle la antena.

Prueba y nos cuentas, el adaptador que he probado es este

https://www.amazon.es/Gigablue-Adaptador-wi-fi-wlan-600mbit/dp/B01JK62QAG

ID USB 0bda:0811
Class ff-ff-ff »
Type net/wireless »
Vendor Realtek Semiconductor »
Name Realtek 8812AU/8821AU 802.11ac WLAN Adapter [USB Wireless Dual-Band Adapter 2.4/5Ghz]
Subsystem Realtek

Envia el comando lsusb por telnet y ponme lo que te responde, por comparar.

Salu2.

En la versión anterior, la 7.5.005 me funcionaba bien en el usb 3.0
Me interesa especialmente conectarlo al 3.0 por la velocidad del puerton usb3.0 vs 2.0.
Gracias por el aporte, probaré en el 2.0 pero para eso ya usaré el wifi propio del uclan.

 

[malk1101]

Necesitamos que hagas lo siguiente, apaga completamente el deco y conecta el usb-wifi, luego enciendes y cuando termine de arrancar envias por telnet este comando
dmesg --> /tmp/dmesg.txt
Luego por ftp te descargas el archivo dmesg.txt que tendras en la carpeta /tmp y nos lo adjuntas.

Salu2

Cuando pueda lo pruebo, gracias.

 

[evox]

En la versión anterior, la 7.5.005 me funcionaba bien en el usb 3.0
Me interesa especialmente conectarlo al 3.0 por la velocidad del puerton usb3.0 vs 2.0.
Gracias por el aporte, probaré en el 2.0 pero para eso ya usaré el wifi propio del uclan.

Aunque uses el 2.0 te da tido el ancho de banda y usa los 5ghz, como te pongo. A mi me conecta a 432mb que es el tope de mi pincho segun expecificaciones.

Por otro lado he visto que pasa en otras imagenes oe-a py3 tambien, pero dudo que sea algo de python3, mas bien algo ke no le gusta a los drivers, imagino que lo estudiaran para darle solucion.

Salu2.

 

[malk1101]

Encontre entre mis trastos un RTL8812au y tras probarlo en el Uclan Ustym 4K PRO y Octagon SF8008 la conclusion es que funciona sin problemas.

Ver el adjunto 28487

El problema biene si conectas el USB-wifi al puerto 3.0, en ese por algun motivo no lo detecta, pero en el puerto trasero 2.0 funciona sin problemas y a mi me da 436mb sin ponerle la antena.

Prueba y nos cuentas, el adaptador que he probado es este

https://www.amazon.es/Gigablue-Adaptador-wi-fi-wlan-600mbit/dp/B01JK62QAG

ID USB 0bda:0811
Class ff-ff-ff »
Type net/wireless »
Vendor Realtek Semiconductor »
Name Realtek 8812AU/8821AU 802.11ac WLAN Adapter [USB Wireless Dual-Band Adapter 2.4/5Ghz]
Subsystem Realtek

Envia el comando lsusb por telnet y ponme lo que te responde, por comparar.

Salu2.

Con el comando lsusb sale todo esto
Bus 001 Device 002: ID 05e3:0608
Bus 001 Device 003: ID 0bda:818b
Bus 003 Device 002: ID 0bda:8812
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0003
Bus 001 Device 004: ID 058f:6387

y el archivo dmesg.txt lo siguiente. Perdonad pero no encuentro como adjuntar el archivo .txt.

Spoiler

pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
hisilicon-pcie: probe of f0001000.pcie failed with error -1
hisi_iommu_ptable_addr:phy 0x1e800000 size:0x400000
hisi_iommu_err_rdaddr :phy 0x1f763600 size:0x200
hisi_iommu_err_wraddr :phy 0x1f763800 size:0x200
in hisi_iommu_domain_init start
in hisi_iommu_domain_init end
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource hisp804
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
NetWinder Floating Point Emulator V0.97 (double precision)
hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available
futex hash table entries: 1024 (order: 4, 65536 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 [email protected]).
FS-Cache: Netfs 'cifs' registered for caching
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
yaffs: yaffs built Installing.
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
hiahci-phy: registered new sata phy driver
brd: module loaded
loop: module loaded
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
hifmc100: no found nand device.
hifmc100: no found spi-nand device.
hieth: /soc/hieth@f9c30000/hieth_phy@0 has invalid PHY address
libphy: himii: probed
mdio_bus himii: /soc/hieth@f9c30000/hieth_phy@0 PHY address 255 is too large
hieth: no dev probed!
libphy: higmac_mii_bus: probed
attached PHY 3 to driver Generic PHY, PHY_ID=0x1cc915
ETH: rgmii, phy_addr=3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3
xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00010010
xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd f98a0000.xhci: xHCI Host Controller
xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
sp805-wdt f8a2c000.watchdog: registration successful
registered new interface driver himciV2.0_4.4.35_20170401
usb 1-1: new high-speed USB device number 2 using ehci-platform
usb 3-1: new high-speed USB device number 2 using xhci-hcd
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
mmc0: MAN_BKOPS_EN bit is not set
mmc0: new DDR MMC card at address 0001
mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB
mmcblk0: p1(boot) p2(bootargs) p3(bootoptions) p4(baseparam) p5(pqparam) p6(logo) p7(deviceinfo) p8(softwareinfo) p9(loaderdb) p10(loader) p11(trustedcore) p12(linuxkernel1) p13(linuxkernel2) p14(linuxkernel3) p15(linuxkernel4) p16(userdata)
usb 1-2: new high-speed USB device number 3 using ehci-platform
f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
usb 1-1.2: new high-speed USB device number 4 using ehci-platform
usb-storage 1-1.2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1.2:1.0
f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected!
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
usbcore: registered new interface driver snd-usb-audio
oprofile: using timer interrupt.
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
Bluetooth: Starting self testing
Bluetooth: ECDH test passed in 21458 usecs
Bluetooth: SMP test passed in 76 usecs
Bluetooth: Finished self testing
ALSA device list:
No soundcards found.
Freeing unused kernel memory: 560K (c0af4000 - c0b80000)
This architecture does not have kernel memory protection.
EXT4-fs (mmcblk0p16): recovery complete
EXT4-fs (mmcblk0p16): mounted filesystem with ordered data mode. Opts: (null)
Load hi_media.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
Load hi_mmz.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:28:35])
virtual device initialization.
Load hi_common.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 26 2018, 14:24:58])
Load hi_pq.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:28])
Load hi_cipher.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:22])
Load hi_hdmi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 30 2019, 15:16:17])
hisi hdmi CEC Driver, (c) 2018 Define Technologies
scsi 0:0:0:0: Direct-Access takeMS Colorline 8.07 PQ: 0 ANSI: 4
print parent bus[usb], bus_id[1-1.2:1.0]
allocate index 0 for non sdcard, try again
print parent bus[usb], bus_id[1-1.2:1.0]
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sdb] 7802880 512-byte logical blocks: (4.00 GB/3.72 GiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sdb] Attached SCSI removable disk
Load hi_vou.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jun 28 2018, 16:48:45])
Load hi_gpio.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:40])
Load hi_gpioi2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:14])
Load hi_i2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:15])
Load hi_tde.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:41])
Load hi_otp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:23])
Load hi_demux.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 26 2018, 18:25:22])
Load hi_adec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:29:59])
Load hi_vfmw.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:53])
Load hi_vpss.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:32:27])
Load hi_vdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:44])
Load hi_adsp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:00])
hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok
Load hi_aiao.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Jul 14 2018, 10:00:23])
Load hi_pvr.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:38])
Load hi_tuner.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:30])
Load hi_keyled.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 27 2019, 19:29:24])
virtual DVB adapter driver, version 1.4, (c) 2010-12 Honza Petrous, SmartImp.cz
vtunerc: registered /dev/misc/vtuner0
vtunerc: registered /dev/misc/vtuner1
vtunerc: registered /dev/misc/vtuner2
hi_dvb: unknown parameter 'hi_vendor' ignored
hi_dvb: unknown parameter 'hi_device' ignored
phi
HI PCIE bridge driver, Copyright (C) 2005-2018 Micronas
DVB: registering new adapter (nHi)
si2166 attach success
DVB: registering adapter 0 frontend 0 (Si2166D)...
random: nonblocking pool is initialized
[hi_dvb_attach_tsport:740 dmx 0,port 32]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[06:15:15:580 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[06:15:15:602 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 128(0x80)
atbm781x2x3x attach success!
DVB: registering adapter 0 frontend 0 (ATBM7821 DVB-T2/C)...
[hi_dvb_attach_tsport:740 dmx 1,port 33]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[06:15:16:059 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[06:15:16:081 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[06:15:16:313 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:16:335 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[1;32mdvb video add event 17 - 7 0
[m
atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[06:15:16:567 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:16:589 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
[hi_dvb_attach_tsport:740 dmx 2,port 34]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[06:15:16:833 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
[1;32mdvb video add event 17 - 7 0
[msi2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[06:15:16:859 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[06:15:17:091 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:17:113 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[06:15:17:345 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:17:367 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
[hi_dvb_attach_tsport:740 dmx 3,port 35]0 5 1 0 184
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
[06:15:17:611 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
[1;32mdvb video add event 17 - 7 0
[m[06:15:17:633 ERROR-HI_I2C]:I2C_DRV_Write[194]:i2c_transfer failed:-6
si2166 I2C(1) write error, ADDR: 202(0xca), DATA: 192(0xc0)
si2166 attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(2) , ADDR: 128(0x80)
[06:15:17:869 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:17:891 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(2) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
atbm781x2x3x_attach I2C(1) , ADDR: 152(0x98)
[06:15:18:123 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
[06:15:18:145 ERROR-HI_I2C]:I2C_DRV_Read[260]:i2c_transfer failed:-6
atbm781x2x3x I2C(1) read error, ADDR: 0(0x0000), DATA: 0(0x00)
atbm781x2x3x attach fail!
phi: No HI Demod Found!
No this tuner device
u32DmxNum : 5 u32FilterNum : 64 u32ChannelNum : 96 u32RamPortNum : 3
Load hi_fb.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Nov 17 2020, 17:37:22])
Mali: Mali device driver loaded
misc hi_dbe: hi_dbe ready
Load hi_jpegdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
Load hi_jpegenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:17])
Load hi_png.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:26])
Load hi_advca.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:01])
Load hi_venc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:48])
Load hi_aenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:30:04])
[1;32mdvb video add event 17 - 7 0
[m
Load hi_sci.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Mar 27 2019, 19:29:44])
Load hi_vi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [May 16 2018, 18:31:55])
Load hi_pmoc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC052_20180124] Build Time: [Sep 6 2019, 10:59:26])
Registered IR keymap rc-hi3798
input: dreambox advanced remote control as /devices/virtual/rc/rc0/input0
rc0: dreambox advanced remote control as /devices/virtual/rc/rc0
hisi KEYS Driver, (c) 2017 Define Technologies
input: Hisi Front Panel Button Controls as /devices/platform/hisi_keys/input/input1
hisi encoder Driver, (c) 2017 Define Technologies
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[1;32mdvb video add event 17 - 7 0
[m
tntfs: module license 'Commercial. For support email [email protected].' taints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
Built against headers 4.4.35_hi3798mv2x #1 SMP Tue Dec 12 14:16:24 CST 2017 arm
Running on kernel 4.4.35 #1 SMP Sun May 22 21:58:33 UTC 2022 armv7l
WARNING: Running kernel does not match configured kernel headers the driver was built with! The driver needs to be rebuilt with the correct kernel headers!
SGI XFS with ACLs, security attributes, realtime, no debug enabled
model=ustym4kpro
machinebuild=ustym4kpro
displaymodel=Ustym 4K PRO
brand=uclan
displaybrand=Uclan
friendlyfamily=ustym4kpro
platform=ustym4kpro
imgversion=8.0
imgrevision=001
imglanguage=multilang
developername=openspa
feedsurl=https://openspa.webhop.info/feeds/8.0/ustym4kpro
distro=openspa
displaydistro=openSPA
oe=OE-Alliance 5.0
kernel=4.4.35
python=3.8
mediaservice=servicegstreamer
multilib=False
architecture=cortexa15hf-neon-vfpv4
socfamily=hisi3798mv200
blindscanbinary=blindscan
rctype=0
rcname=uclan1
rcidnum=2
smallflash=False
middleflash=False
imagedir=uclan/ustym4kpro
imagefs= uclanemmc
mtdbootfs=
mtdrootfs=mmcblk0p16
mtdkernel=mmcblk0p12
rootfile=rootfs.tar.bz2
kernelfile=kernel.bin
mkubifs=
ubinize=
forcemode=no
compiledate=20220612
fpu=hard
displaytype=7segment
transcoding=False
multitranscoding=True
hdmi=True
yuv=False
rca=False
avjack=True
scart=False
dvi=False
svideo=False
hdmihdin=False
hdmifhdin=False
wol=False
wwol=False
ci=False
vfdsymbol=False
fhdskin=True
dboxlcd=False
imageversion=8.0
imagebuild=001
imagedevbuild=001
imagetype=release
driversdate=@DRIVERSDATE@
EXT4-fs (mmcblk0p16): re-mounted. Opts: data=ordered
usbcore: registered new interface driver rtl8192eu
vmap allocation for size 1376256 failed: use vmalloc=<size> to increase size.
vmalloc: allocation failure: 1371963 bytes
modprobe: page allocation failure: order:0, mode:0x24000c0
CPU: 0 PID: 1635 Comm: modprobe Tainted: P O 4.4.35 #1
Hardware name: bigfish
[<c0020958>] (unwind_backtrace) from [<c001ac30>] (show_stack+0x20/0x24)
[<c001ac30>] (show_stack) from [<c03d3508>] (dump_stack+0x88/0x9c)
[<c03d3508>] (dump_stack) from [<c00fa9b4>] (warn_alloc_failed+0xe4/0x128)
[<c00fa9b4>] (warn_alloc_failed) from [<c012bd30>] (__vmalloc_node_range+0xc8/0xd4)
[<c012bd30>] (__vmalloc_node_range) from [<c001bdbc>] (module_alloc+0x5c/0x64)
[<c001bdbc>] (module_alloc) from [<c00b148c>] (load_module+0x828/0x255c)
[<c00b148c>] (load_module) from [<c00b3414>] (SyS_finit_module+0xa4/0xdc)
[<c00b3414>] (SyS_finit_module) from [<c0015c80>] (ret_fast_syscall+0x0/0x3c)
Mem-Info:
active_anon:154 inactive_anon:0 isolated_anon:0
active_file:1506 inactive_file:4816 isolated_file:0
unevictable:0 dirty:7 writeback:0 unstable:0
slab_reclaimable:2074 slab_unreclaimable:1891
mapped:586 shmem:1 pagetables:31 bounce:0
free:212122 free_pcp:834 free_cma:0
Normal free:439476kB min:8192kB low:10240kB high:12288kB active_anon:260kB inactive_anon:0kB active_file:4384kB inactive_file:9092kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:528384kB managed:507028kB mlocked:0kB dirty:28kB writeback:0kB mapped:1288kB shmem:0kB slab_reclaimable:8296kB slab_unreclaimable:7564kB kernel_stack:984kB pagetables:64kB unstable:0kB bounce:0kB free_pcp:1796kB local_pcp:228kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no cma_watermark:0kB
lowmem_reserve[]: 0 3375 3375
HighMem free:409012kB min:420kB low:2164kB high:3908kB active_anon:356kB inactive_anon:0kB active_file:1640kB inactive_file:10172kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:520192kB managed:432116kB mlocked:0kB dirty:0kB writeback:0kB mapped:1056kB shmem:4kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:60kB unstable:0kB bounce:0kB free_pcp:1540kB local_pcp:284kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no cma_watermark:0kB
lowmem_reserve[]: 0 0 0
Normal: 3*4kB (UME) 7*8kB (UM) 5*16kB (U) 1*32kB (U) 2*64kB (UE) 1*128kB (U) 1*256kB (M) 3*512kB (UME) 3*1024kB (UME) 2*2048kB (UE) 105*4096kB (M) = 439476kB
HighMem: 1*4kB (U) 0*8kB 1*16kB (U) 1*32kB (M) 2*64kB (UM) 0*128kB 1*256kB (U) 0*512kB 1*1024kB (M) 1*2048kB (U) 99*4096kB (M) = 409012kB
6324 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
262144 pages RAM
130048 pages HighMem/MovableOnly
27358 pages reserved
19456 pages cma reserved
FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[06:15:21:914 ERROR-HI_PM]:c51_GetWakeUpMode[1297]: wakeup mode err!
proc_vmpeg_0_dst_apply_write 1
[iframe_confirm:190] iframe confirm

video[0] ready to play
[iframe_finish:208] iframe finish

[1;32mdvb video add event 17 - 7 0
[m
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[iframe_confirm:190] iframe confirm

[iframe_finish:208] iframe finish

video[0] ready to play
[21:57:16:664 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 0 Failed
off
lnb power offoff
lnb power off
OPS_si2166_init
@RDA5815M_Initialize
api->spi_download 0
Build Option: Si2183_B60_COMPATIBLE
[1;32mdvb video add event 17 - 7 0
[m
Si2166-D60 Part running 'FW_6_1b4'
@si2166_i2c_gate_ctrl
@si2166_i2c_gate_ctrl
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@si2166_diseqc_set_voltage OFF
@OPS diseqc tone = 0(22K-OFF)
off
lnb power off@si2166_diseqc_set_voltage OFF
off
lnb power offoff
lnb power offoff
lnb power offoff
lnb power offproc_vmpeg_0_dst_apply_write 00000001

panscan
proc_video_videomode_50hz_write [1080p50]
proc_video_videomode_60hz_write [1080p]
proc_video_videomode_24hz_write [1080p24]
wol off
[21:57:26:673 FATAL-HI_TDE]:TdeOsiListSubmitJob[638]:handle:72 interrupt!
[21:57:26:680 ERROR-HI_FB]:HIFB_DRV_Blit[3419]:end job failed
[21:57:26:685 ERROR-HI_FB]:DRV_HIFB_Accel[3689]:hifb_refresh_1buf blit err 5!
sh (2369): drop_caches: 3
sh (2376): drop_caches: 3
hi_dvb_set_source [dmx: 4, tuner: 16, isvtuner: 0]
[open_pes_stream:1134]pid = 0074
[PES:E13FA000,BUF:F1600000]
[FILTER:E189E000
[open_pes_stream:1134]pid = 00a6
[PES:E18A3000,BUF:F1A02000]
[FILTER:E18CA000
audio[0] ready to play
video[0] ready to play
[1;32mdvb video add event 17 - 7 0
[m
dvbdmx: ts packet size is 188
[21:57:26:912 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[520]:Port = 0 RelPortFrame 0 Failed
[1;32mdvb video add event 1 - 0 0 1920 1080
[m
[1;32mdvb video add event 2 - 0 0 30 0
[m******************************************VIDEO_GET_FRAME_RATE 30

 

[evox]

@malk1101 has probado si te funciona en el puerto 2.0 ?

Salu2.

 

[malk1101]

@malk1101 has probado si te funciona en el puerto 2.0 ?

Salu2

Sí, en el 2.0 funciona. El problema es en 3.0.
En la imagen anterior me funcionaba bien en el 3.0.
Ha sido actualizar y dejar de funcionar en el 3.0

 

[Clemente]

1o entiendo el porque se necesita poner un usb/wifi cuando este modelo lo tiene integrado

• 2 antenas WiFi externas (WiFi de 300 Mbps)

 

[JR]

1o entiendo el porque se necesita poner un usb/wifi cuando este modelo lo tiene integrado

• 2 antenas WiFi externas (WiFi de 300 Mbps)

Porque los adaptadores WiFi embedidos en los decos son bastante flojos. Además se pueden conseguir mayores velocidades, por ejemplo si pones un adaptador de 600 Mbps

 

[Clemente]

Porque los adaptadores WiFi embedidos en los decos son bastante flojos. Además se pueden conseguir mayores velocidades, por ejemplo si pones un adaptador de 600 Mbps

Ya, pero es curioso, que en la foto que se expone mas arriba, solo salga el adaptador wifi y no salga el original, yo lo he probado en otros decos ( octagon ) y me salen 2 conexiones en wlan, el original del deco y el del usb