Al encender se queda en booting y no me deja instlar firmware

[pope83]

Pues eso sin instalar nada al encender se quedo en booting.

 

[fugitivo33]

Marca del deco ??

 

[oscar_fl]

Marca del deco ??

Ya lo indica en el la sección que esta puesto.

Si no hace nada y no puede o no reconoce el pendrive, lo mejor es si esta en garantía tirar de sat.

 

[pope83]

Gracias.

 

[fernando1964]

a ver si puedes ponerle esto

https://www.formuler.tv/software-download

 

[jmhm1968]

a un amigo mio le padsa lo mismo lo habeis solucionado de alguna manera? gracias

 

[josemiguelgs]

usando otro pen drive lo hemos soluciondo

 

[oscar_fl]

usando otro pen drive lo hemos soluciondo

Hay que presentarse al foro, que no cuesta nada.

 

[Apolo Cuarto]

Pues eso sin instalar nada al encender se quedo en booting.

Hola compañero, he tenido mala suerte, hace nada que he instalado openspa y estoy muy contento con la imagen dicho sea de paso. Ayer estaba todo correcto, pero hoy despues de dejar el deco anoche en apagado profundo (como siempre lo apago) hoy lo enciendo, se inicia y se abre en la pantalla openspa.info sale el circuito dando vueltas arriba a la izquierda de la pantalla y en el display pone Booting. Se reinicia pantalla azul y vuelta a empezar. Que solución me dais?. Esta en garantía el deco.

 

[evox]

Hola compañero, he tenido mala suerte, hace nada que he instalado openspa y estoy muy contento con la imagen dicho sea de paso. Ayer estaba todo correcto, pero hoy despues de dejar el deco anoche en apagado profundo (como siempre lo apago) hoy lo enciendo, se inicia y se abre en la pantalla openspa.info sale el circuito dando vueltas arriba a la izquierda de la pantalla y en el display pone Booting. Se reinicia pantalla azul y vuelta a empezar. Que solución me dais?. Esta en garantía el deco.

La garantia en esto no es aplicable es problema de software no del deco, puedes reinstalar la imagen o antes entrar por ftp al deco mientras esta arrancando e ir a la ruta home/root/logs y ponernos por aki el ultinmo crashlog que tengas, deberia salir uno nuevo por reinicio o pantallazo azul, cuando lo pongas veremos si se puede solucionar sin reinstalar imagen. Por otro lado indica cual es tu deco y que version de imagen usas.

Salu2.

 

[morser]

Hola compañero, he tenido mala suerte, hace nada que he instalado openspa y estoy muy contento con la imagen dicho sea de paso. Ayer estaba todo correcto, pero hoy despues de dejar el deco anoche en apagado profundo (como siempre lo apago) hoy lo enciendo, se inicia y se abre en la pantalla openspa.info sale el circuito dando vueltas arriba a la izquierda de la pantalla y en el display pone Booting. Se reinicia pantalla azul y vuelta a empezar. Que solución me dais?. Esta en garantía el deco.

Si te sale el bootlogo y el spinner y luego te da pantallazo azul es porque intenta cargar enigma y da un error por lo que sea, te habra generado archivos de crashlog en /home/root/log, entra por ftp y recupera uno de los ultimos archivos de esos y nos lo subes para que podamos ver que error da.

 

[Apolo Cuarto]

Hola aquí tenéis y Muchas Gracias por la ayuda;

Primero os pongo este que ocupa 16.4 KB:

openSPA Enigma2 crash log
crashdate=mar feb 13 21:00:07 2018
compiledate=Jan 15 2018
skin=Default Skin
sourcedate=2018-01-14
branch=master
rev=ca6a68b
component=enigma2, signal
stbmodel=formuler1
stbmodel=ultimo
stbmodel=formuler1
kernelcmdline=libata.force=1:3.0G,2:3.0G,3:3.0G ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=240M@16M bmem=450M@512M console=null
nimsockets=NIM Socket 0:
imageversion=box_type=formuler1
imageissue=Welcome to openSPA for %h
rontend 1 to slotid 1, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
21:00:00.3192 { } Components/NimManager.py:232 update slot: 0 configmode: advanced
21:00:00.3195 [ ] dvb/sec.cpp:1948 setSlotNotLinked eDVBSatelliteEquipmentControl::setSlotNotLinked(0)
21:00:00.3211 { } Components/NimManager.py:369 updateAdvanced add 192 to 1
21:00:00.3213 [ ] dvb/sec.cpp:1447 addLNB eDVBSatelliteEquipmentControl::addLNB(0)
21:00:00.3215 [ ] dvb/sec.cpp:1513 setLNBSatCRpositionnumber eDVBSatelliteEquipmentControl::setLNBSatCRpositionnumber(1)
21:00:00.3217 [ ] dvb/sec.cpp:1704 setLNBSatCR eDVBSatelliteEquipmentControl::setLNBSatCR(-1)
21:00:00.3218 [ ] dvb/sec.cpp:1525 setLNBSatCRTuningAlgo eDVBSatelliteEquipmentControl::setLNBSatCRTuningAlgo(0)
21:00:00.3219 [ ] dvb/sec.cpp:1537 setLNBBootupTime eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
21:00:00.3221 [ ] dvb/sec.cpp:1463 setLNBLOFL eDVBSatelliteEquipmentControl::setLNBLOFL(9750000)
21:00:00.3223 [ ] dvb/sec.cpp:1473 setLNBLOFH eDVBSatelliteEquipmentControl::setLNBLOFH(9750000)
21:00:00.3225 [ ] dvb/sec.cpp:1483 setLNBThreshold eDVBSatelliteEquipmentControl::setLNBThreshold(12300000)
21:00:00.3227 [ ] dvb/sec.cpp:1493 setLNBIncreasedVoltage eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(0)
21:00:00.3229 [ ] dvb/sec.cpp:1550 setDiSEqCMode eDVBSatelliteEquipmentControl::setDiSEqcMode(0)
21:00:00.3230 [ ] dvb/sec.cpp:1453 setLNBSlotMask eDVBSatelliteEquipmentControl::setLNBSlotMask(1)
21:00:00.3231 [ ] dvb/sec.cpp:1503 setLNBPrio eDVBSatelliteEquipmentControl::setLNBPrio(-1)
21:00:00.3233 [ ] dvb/sec.cpp:1771 addSatellite eDVBSatelliteEquipmentControl::addSatellite(192)
21:00:00.3238 [ ] dvb/sec.cpp:1788 setVoltageMode eDVBSatelliteEquipmentControl::setVoltageMode(0)
21:00:00.3240 [ ] dvb/sec.cpp:1799 setToneMode eDVBSatelliteEquipmentControl::setToneMode(0)
21:00:00.3241 [ ] dvb/sec.cpp:1814 setRotorPosNum eDVBSatelliteEquipmentControl::setRotorPosNum(0)
21:00:00.3249 { } Components/NimManager.py:232 update slot: 1 configmode: advanced
21:00:00.3251 [ ] dvb/sec.cpp:1948 setSlotNotLinked eDVBSatelliteEquipmentControl::setSlotNotLinked(1)
21:00:00.3267 { } Components/NimManager.py:369 updateAdvanced add 192 to 1
21:00:00.3270 [ ] dvb/sec.cpp:1447 addLNB eDVBSatelliteEquipmentControl::addLNB(1)
21:00:00.3271 [ ] dvb/sec.cpp:1513 setLNBSatCRpositionnumber eDVBSatelliteEquipmentControl::setLNBSatCRpositionnumber(1)
21:00:00.3272 [ ] dvb/sec.cpp:1704 setLNBSatCR eDVBSatelliteEquipmentControl::setLNBSatCR(-1)
21:00:00.3273 [ ] dvb/sec.cpp:1525 setLNBSatCRTuningAlgo eDVBSatelliteEquipmentControl::setLNBSatCRTuningAlgo(0)
21:00:00.3275 [ ] dvb/sec.cpp:1537 setLNBBootupTime eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
21:00:00.3278 [ ] dvb/sec.cpp:1463 setLNBLOFL eDVBSatelliteEquipmentControl::setLNBLOFL(9750000)
21:00:00.3279 [ ] dvb/sec.cpp:1473 setLNBLOFH eDVBSatelliteEquipmentControl::setLNBLOFH(9750000)
21:00:00.3280 [ ] dvb/sec.cpp:1483 setLNBThreshold eDVBSatelliteEquipmentControl::setLNBThreshold(12300000)
21:00:00.3282 [ ] dvb/sec.cpp:1493 setLNBIncreasedVoltage eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(0)
21:00:00.3283 [ ] dvb/sec.cpp:1550 setDiSEqCMode eDVBSatelliteEquipmentControl::setDiSEqcMode(0)
21:00:00.3285 [ ] dvb/sec.cpp:1453 setLNBSlotMask eDVBSatelliteEquipmentControl::setLNBSlotMask(2)
21:00:00.3287 [ ] dvb/sec.cpp:1503 setLNBPrio eDVBSatelliteEquipmentControl::setLNBPrio(-1)
21:00:00.3288 [ ] dvb/sec.cpp:1771 addSatellite eDVBSatelliteEquipmentControl::addSatellite(192)
21:00:00.3290 [ ] dvb/sec.cpp:1788 setVoltageMode eDVBSatelliteEquipmentControl::setVoltageMode(0)
21:00:00.3292 [ ] dvb/sec.cpp:1799 setToneMode eDVBSatelliteEquipmentControl::setToneMode(0)
21:00:00.3293 [ ] dvb/sec.cpp:1814 setRotorPosNum eDVBSatelliteEquipmentControl::setRotorPosNum(0)
21:00:00.3301 { } Components/NimManager.py:327 update sec config completed
21:00:00.3307 { } Components/NimManager.py:2295 InitNimManager [NimManager] slotname = A, slotdescription = BCM7346 (internal), multitype = False, current type = DVB-S2
21:00:00.3312 { } Components/NimManager.py:2295 InitNimManager [NimManager] slotname = B, slotdescription = BCM7346 (internal), multitype = False, current type = DVB-S2
21:00:00.3447 { } Components/Renderer/Picon.py:55 onMountpointAdded [Picon] adding path: /usr/share/enigma2/
21:00:00.4227 { E } RecordTimer.py:36 <module> [RecordTimer] import from 'Screens.InfoBar import InfoBar' failed: cannot import name InfoBar
21:00:00.4385 { E } Screens/MovieSelection.py:78 <module> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
21:00:00.8116 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
21:00:00.8120 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.movistar___astra_.tv
21:00:00.8155 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 224 entries in Bouquet userbouquet.movistar___astra_.tv
21:00:00.8158 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.mas_iptv.tv
21:00:00.8162 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 15 entries in Bouquet userbouquet.mas_iptv.tv
21:00:00.8165 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
21:00:00.8167 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
21:00:00.8169 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
21:00:00.8172 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 13 entries in Bouquet userbouquet.LastScanned.tv
21:00:00.8173 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 4 entries in Bouquet bouquets.tv
21:00:00.8177 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
21:00:00.8179 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
21:00:00.8181 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
21:00:00.8182 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 1 entries in Bouquet bouquets.radio
21:00:00.8182 [ ] dvb/db.cpp:1194 renumberBouquet [eDVBDB] Renumbering...
21:00:00.8415 { } mytest.py:91 useSyncUsingChanged [Time By]: Transponder
21:00:00.8418 [ ] dvb/epgcache.cpp:470 timeUpdated [eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
21:00:05.2128 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
21:00:05.2143 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
21:00:05.2150 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
21:00:05.2158 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
21:00:05.2166 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
21:00:05.2173 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
21:00:05.2181 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
21:00:05.2189 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
21:00:05.2415 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
21:00:05.2425 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
21:00:05.2434 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
21:00:05.2444 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/OpenSans-Regular.ttf...OK (Regular)
21:00:05.2455 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/HelveticaLight.ttf...OK (Helve)
21:00:05.2463 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/setrixHD.ttf...OK (SetrixHD)
21:00:05.2931 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)
21:00:05.2940 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)
21:00:05.2949 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)
21:00:05.2957 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)
21:00:05.2988 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
21:00:05.3519 { W } Components/InputDevice.py:66 getInputDeviceType Unknown device type: RC for hdmi_cec
21:00:05.3577 { W } Components/InputDevice.py:66 getInputDeviceType Unknown device type: front panel
21:00:05.3661 { E } Components/InputDevice.py:49 getInputDevices [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
21:00:05.4959 { } Components/Timezones.py:133 activateTimezone [Timezones] setting timezone to Europe/Brussels
21:00:05.5142 { } Components/AVSwitch.py:301 setAspect [VideoHardware] setting aspect: 16:9
21:00:05.5153 { } Components/AVSwitch.py:315 setWss [VideoHardware] setting wss: auto
21:00:05.5162 { } Components/AVSwitch.py:321 setPolicy43 [VideoHardware] setting policy: panscan
21:00:05.5178 { } Components/AVSwitch.py:338 setPolicy169 [VideoHardware] setting policy2: letterbox
21:00:05.5300 [ ] dvb/volume.cpp:161 setVolume [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
21:00:05.5347 { } Components/AVSwitch.py:988 setScaler_sharpness [VideoHardware] setting scaler_sharpness to: 0000000D
21:00:05.5366 { } Components/AVSwitch.py:164 setMode [VideoHardware] setMode - port: HDMI, mode: 1080p, rate: multi
21:00:05.6365 [ ] components/tuxtxtapp.cpp:116 setEnableTtCachingOnOff [eTuxttxtApp] enable caching
21:00:05.6550 { } Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled.
21:00:05.6559 { } Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled.
21:00:05.6828 [ ] dvb/epgcache.cpp:442 setCacheFile [eEPGCache] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
21:00:06.0010 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
21:00:06.0577 { } Components/Lcd.py:194 setMode setLCDMode 1
21:00:06.0591 { } Components/Lcd.py:230 setPower setLCDPower 1
21:00:06.0609 { } Components/Lcd.py:242 setShowoutputresolution setLCDShowoutputresolution 1
21:00:06.0730 { } Screens/UserInterfacePositioner.py:66 InitOsd Setting OSD position: 0 720 0 576
21:00:06.0739 { } Screens/UserInterfacePositioner.py:70 setOSDAlpha Setting OSD alpha: 255
21:00:06.0754 { } Screens/UserInterfacePositioner.py:80 set3DMode Setting 3D mode: auto
21:00:06.0769 { } Screens/UserInterfacePositioner.py:102 set3DZnorm Setting 3D depth: 50
21:00:06.0939 { } Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled.
21:00:06.0945 { } Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled.
21:00:06.1043 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
21:00:06.1073 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
21:00:06.1100 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
21:00:06.6146 { } Plugins/Extensions/Kodi/server.py:10 <module> E2KODI_DEBUG_LVL = 40
21:00:06.8719 { } Plugins/Extensions/SubsSupport/e2_utils.py:442 getFonts [getFonts] fontDir: /usr/share/fonts/
21:00:06.9649 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Regular in skin_default.xml
21:00:06.9652 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Italic in skin_default.xml
21:00:06.9655 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Bold in skin_default.xml
21:00:06.9658 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Boldit in skin_default.xml
21:00:06.9661 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subtitlefont in skin_default.xml
21:00:06.9665 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font LCD in skin_default.xml
21:00:06.9668 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Replacement in skin_default.xml
21:00:06.9671 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Console in skin_default.xml
21:00:06.9765 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subs in skin_subtitles.xml
21:00:06.9768 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsi in skin_subtitles.xml
21:00:06.9771 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsb in skin_subtitles.xml
21:00:06.9773 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsz in skin_subtitles.xml
21:00:06.9778 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Roboto-Bold)
21:00:06.9786 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt_nonbold.ttf...OK (tuxtxt_nonbold)
21:00:06.9792 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/DejaVuSans.ttf...OK (DejaVuSans)
21:00:06.9800 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (tuxtxt)
21:00:06.9806 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/time.ttf...OK (time)
21:00:06.9812 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Roboto-BlackItalic)
21:00:06.9820 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (ae_AlMateen)
21:00:06.9826 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (lcd)
21:00:06.9833 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/andale.ttf...OK (andale)
21:00:06.9840 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (valis_enigma)
21:00:06.9847 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (nmsbd)
21:00:06.9854 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Roboto-BoldItalic)
21:00:06.9862 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (md_khmurabi_10)
21:00:06.9870 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Roboto-Black)
21:00:07.0240 { } Plugins/Extensions/SubsSupport/subtitles.py:213 <module> [SubsSupport] looking for custom colors in /usr/lib/enigma2/python/Plugins/Extensions/SubsSupport/colors.txt
21:00:07.0292 { } Plugins/Extensions/SubsSupport/subtitles.py:221 <module> [SubsSupport] adding custom color customcolor1
21:00:07.0529 { } Plugins/Extensions/Kodi/plugin.py:63 SaveDesktopInfo [XBMC] Desktop size [1280x720]
21:00:07.8059 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TVweb/OpenSans-Regular.ttf...[FONT] failed: Operation not permitted
21:00:07.8063 [ ] bsod.cpp:305 oops PC: 7744da6c
21:00:07.8063 [ ] bsod.cpp:311 oops 00000000 00000001 00000000 5680003e
21:00:07.8065 [ ] bsod.cpp:311 oops 76d6b724 7fc51901 00000001 00d46219
21:00:07.8065 [ ] bsod.cpp:311 oops 65747845 6f69736e 00000000 4872616c
21:00:07.8065 [ ] bsod.cpp:311 oops 65704f2f 6e61536e 65522d73 006c0000
21:00:07.8066 [ ] bsod.cpp:311 oops 00d461f0 8fb50048 00d46208 00000000
21:00:07.8066 [ ] bsod.cpp:311 oops 7fc518f0 0078ab30 72daafc8 76089710
21:00:07.8067 [ ] bsod.cpp:311 oops 006be54c 7744d9fc fefefeff 00000000
21:00:07.8067 [ ] bsod.cpp:311 oops 774c6350 7fc51840 72b82510 0050e2dc
21:00:07.8078 [ ] bsod.cpp:328 print_backtrace Backtrace:
21:00:07.8082 [ ] bsod.cpp:336 print_backtrace /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x466EA8]
21:00:07.8083 [ ] bsod.cpp:336 print_backtrace linux-vdso.so.1(n/a) [0x77664560]
21:00:07.8085 [ ] bsod.cpp:336 print_backtrace /usr/lib/libfreetype.so.6(FT_Done_Face) [0x7744DA6E]
21:00:07.8085 [ ] bsod.cpp:348 handleFatalSignal -------FATAL SIGNAL
dmesg

--------------------------------------------------------------------------------------------------------------------


Y ahora os pongo esta que ocupa 29.7 KB:

openSPA Enigma2 crash log
crashdate=mar feb 13 20:59:46 2018
compiledate=Jan 15 2018
skin=Default Skin
sourcedate=2018-01-14
branch=master
rev=ca6a68b
component=enigma2, signal
stbmodel=formuler1
stbmodel=ultimo
stbmodel=formuler1
kernelcmdline=libata.force=1:3.0G,2:3.0G,3:3.0G ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=240M@16M bmem=450M@512M console=null
nimsockets=NIM Socket 0:
imageversion=box_type=formuler1
imageissue=Welcome to openSPA for %h
rontend 1 to slotid 1, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
03:51:02.0744 { } Components/NimManager.py:232 update slot: 0 configmode: advanced
03:51:02.0755 [ ] dvb/sec.cpp:1948 setSlotNotLinked eDVBSatelliteEquipmentControl::setSlotNotLinked(0)
03:51:02.0772 { } Components/NimManager.py:369 updateAdvanced add 192 to 1
03:51:02.0783 [ ] dvb/sec.cpp:1447 addLNB eDVBSatelliteEquipmentControl::addLNB(0)
03:51:02.0790 [ ] dvb/sec.cpp:1513 setLNBSatCRpositionnumber eDVBSatelliteEquipmentControl::setLNBSatCRpositionnumber(1)
03:51:02.0792 [ ] dvb/sec.cpp:1704 setLNBSatCR eDVBSatelliteEquipmentControl::setLNBSatCR(-1)
03:51:02.0793 [ ] dvb/sec.cpp:1525 setLNBSatCRTuningAlgo eDVBSatelliteEquipmentControl::setLNBSatCRTuningAlgo(0)
03:51:02.0794 [ ] dvb/sec.cpp:1537 setLNBBootupTime eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
03:51:02.0797 [ ] dvb/sec.cpp:1463 setLNBLOFL eDVBSatelliteEquipmentControl::setLNBLOFL(9750000)
03:51:02.0799 [ ] dvb/sec.cpp:1473 setLNBLOFH eDVBSatelliteEquipmentControl::setLNBLOFH(9750000)
03:51:02.0801 [ ] dvb/sec.cpp:1483 setLNBThreshold eDVBSatelliteEquipmentControl::setLNBThreshold(12300000)
03:51:02.0803 [ ] dvb/sec.cpp:1493 setLNBIncreasedVoltage eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(0)
03:51:02.0805 [ ] dvb/sec.cpp:1550 setDiSEqCMode eDVBSatelliteEquipmentControl::setDiSEqcMode(0)
03:51:02.0806 [ ] dvb/sec.cpp:1453 setLNBSlotMask eDVBSatelliteEquipmentControl::setLNBSlotMask(1)
03:51:02.0808 [ ] dvb/sec.cpp:1503 setLNBPrio eDVBSatelliteEquipmentControl::setLNBPrio(-1)
03:51:02.0810 [ ] dvb/sec.cpp:1771 addSatellite eDVBSatelliteEquipmentControl::addSatellite(192)
03:51:02.0813 [ ] dvb/sec.cpp:1788 setVoltageMode eDVBSatelliteEquipmentControl::setVoltageMode(0)
03:51:02.0815 [ ] dvb/sec.cpp:1799 setToneMode eDVBSatelliteEquipmentControl::setToneMode(0)
03:51:02.0825 [ ] dvb/sec.cpp:1814 setRotorPosNum eDVBSatelliteEquipmentControl::setRotorPosNum(0)
03:51:02.0833 { } Components/NimManager.py:232 update slot: 1 configmode: advanced
03:51:02.0835 [ ] dvb/sec.cpp:1948 setSlotNotLinked eDVBSatelliteEquipmentControl::setSlotNotLinked(1)
03:51:02.0851 { } Components/NimManager.py:369 updateAdvanced add 192 to 1
03:51:02.0853 [ ] dvb/sec.cpp:1447 addLNB eDVBSatelliteEquipmentControl::addLNB(1)
03:51:02.0854 [ ] dvb/sec.cpp:1513 setLNBSatCRpositionnumber eDVBSatelliteEquipmentControl::setLNBSatCRpositionnumber(1)
03:51:02.0856 [ ] dvb/sec.cpp:1704 setLNBSatCR eDVBSatelliteEquipmentControl::setLNBSatCR(-1)
03:51:02.0857 [ ] dvb/sec.cpp:1525 setLNBSatCRTuningAlgo eDVBSatelliteEquipmentControl::setLNBSatCRTuningAlgo(0)
03:51:02.0858 [ ] dvb/sec.cpp:1537 setLNBBootupTime eDVBSatelliteEquipmentControl::setLNBBootupTime(0)
03:51:02.0861 [ ] dvb/sec.cpp:1463 setLNBLOFL eDVBSatelliteEquipmentControl::setLNBLOFL(9750000)
03:51:02.0863 [ ] dvb/sec.cpp:1473 setLNBLOFH eDVBSatelliteEquipmentControl::setLNBLOFH(9750000)
03:51:02.0864 [ ] dvb/sec.cpp:1483 setLNBThreshold eDVBSatelliteEquipmentControl::setLNBThreshold(12300000)
03:51:02.0867 [ ] dvb/sec.cpp:1493 setLNBIncreasedVoltage eDVBSatelliteEquipmentControl::setLNBIncreasedVoltage(0)
03:51:02.0870 [ ] dvb/sec.cpp:1550 setDiSEqCMode eDVBSatelliteEquipmentControl::setDiSEqcMode(0)
03:51:02.0871 [ ] dvb/sec.cpp:1453 setLNBSlotMask eDVBSatelliteEquipmentControl::setLNBSlotMask(2)
03:51:02.0873 [ ] dvb/sec.cpp:1503 setLNBPrio eDVBSatelliteEquipmentControl::setLNBPrio(-1)
03:51:02.0874 [ ] dvb/sec.cpp:1771 addSatellite eDVBSatelliteEquipmentControl::addSatellite(192)
03:51:02.0877 [ ] dvb/sec.cpp:1788 setVoltageMode eDVBSatelliteEquipmentControl::setVoltageMode(0)
03:51:02.0878 [ ] dvb/sec.cpp:1799 setToneMode eDVBSatelliteEquipmentControl::setToneMode(0)
03:51:02.0880 [ ] dvb/sec.cpp:1814 setRotorPosNum eDVBSatelliteEquipmentControl::setRotorPosNum(0)
03:51:02.0897 { } Components/NimManager.py:327 update sec config completed
03:51:02.0903 { } Components/NimManager.py:2295 InitNimManager [NimManager] slotname = A, slotdescription = BCM7346 (internal), multitype = False, current type = DVB-S2
03:51:02.0908 { } Components/NimManager.py:2295 InitNimManager [NimManager] slotname = B, slotdescription = BCM7346 (internal), multitype = False, current type = DVB-S2
03:51:02.1337 { } Components/Renderer/Picon.py:55 onMountpointAdded [Picon] adding path: /usr/share/enigma2/
03:51:02.2523 { E } RecordTimer.py:36 <module> [RecordTimer] import from 'Screens.InfoBar import InfoBar' failed: cannot import name InfoBar
03:51:02.2803 { E } Screens/MovieSelection.py:78 <module> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
03:51:02.8604 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
03:51:02.8630 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.movistar___astra_.tv
03:51:02.8684 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 224 entries in Bouquet userbouquet.movistar___astra_.tv
03:51:02.8692 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.mas_iptv.tv
03:51:02.8706 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 15 entries in Bouquet userbouquet.mas_iptv.tv
03:51:02.8718 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
03:51:02.8730 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
03:51:02.8742 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
03:51:02.8752 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 13 entries in Bouquet userbouquet.LastScanned.tv
03:51:02.8753 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 4 entries in Bouquet bouquets.tv
03:51:02.8766 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
03:51:02.8784 [ ] dvb/db.cpp:1040 loadBouquet [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
03:51:02.8792 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
03:51:02.8794 [ ] dvb/db.cpp:1150 loadBouquet [eDVBDB] 1 entries in Bouquet bouquets.radio
03:51:02.8795 [ ] dvb/db.cpp:1194 renumberBouquet [eDVBDB] Renumbering...
03:51:02.9110 { } mytest.py:91 useSyncUsingChanged [Time By]: Transponder
03:51:02.9135 [ ] dvb/epgcache.cpp:470 timeUpdated [eEPGCache] time updated.. but cache file not set yet.. dont start epg!!
20:59:41.2361 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
20:59:41.2758 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
20:59:41.2873 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
20:59:41.2993 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
20:59:41.3092 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
20:59:41.3256 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
20:59:41.3341 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
20:59:41.3420 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
20:59:41.3692 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
20:59:41.3700 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
20:59:41.3708 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
20:59:41.3767 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/OpenSans-Regular.ttf...OK (Regular)
20:59:41.3923 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/HelveticaLight.ttf...OK (Helve)
20:59:41.3980 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/enigma2/MetrixJRSD/fonts/setrixHD.ttf...OK (SetrixHD)
20:59:41.4860 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Regular.ttf...OK (Subs)
20:59:41.4965 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Italic.ttf...OK (Subsi)
20:59:41.5062 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-Bold.ttf...OK (Subsb)
20:59:41.5173 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/LiberationSans-BoldItalic.ttf...OK (Subsz)
20:59:41.5285 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
20:59:41.5841 { W } Components/InputDevice.py:66 getInputDeviceType Unknown device type: RC for hdmi_cec
20:59:41.5898 { W } Components/InputDevice.py:66 getInputDeviceType Unknown device type: front panel
20:59:41.5980 { E } Components/InputDevice.py:49 getInputDevices [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
20:59:42.3392 { } Components/Timezones.py:133 activateTimezone [Timezones] setting timezone to Europe/Brussels
20:59:42.3565 { } Components/AVSwitch.py:301 setAspect [VideoHardware] setting aspect: 16:9
20:59:42.3576 { } Components/AVSwitch.py:315 setWss [VideoHardware] setting wss: auto
20:59:42.3585 { } Components/AVSwitch.py:321 setPolicy43 [VideoHardware] setting policy: panscan
20:59:42.3599 { } Components/AVSwitch.py:338 setPolicy169 [VideoHardware] setting policy2: letterbox
20:59:42.3911 [ ] dvb/volume.cpp:161 setVolume [eDVBVolumecontrol] Setvolume: raw: 100 100, -1db: 0 0
20:59:42.3960 { } Components/AVSwitch.py:988 setScaler_sharpness [VideoHardware] setting scaler_sharpness to: 0000000D
20:59:42.3978 { } Components/AVSwitch.py:164 setMode [VideoHardware] setMode - port: HDMI, mode: 1080p, rate: multi
20:59:43.2343 [ ] components/tuxtxtapp.cpp:116 setEnableTtCachingOnOff [eTuxttxtApp] enable caching
20:59:43.2548 { } Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled.
20:59:43.2555 { } Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled.
20:59:43.2825 [ ] dvb/epgcache.cpp:442 setCacheFile [eEPGCache] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
20:59:43.6190 [ ] base/console.cpp:110 execute [eConsoleAppContainer] Starting /bin/sh
20:59:43.7259 { } Components/Lcd.py:194 setMode setLCDMode 1
20:59:43.7280 { } Components/Lcd.py:230 setPower setLCDPower 1
20:59:43.7305 { } Components/Lcd.py:242 setShowoutputresolution setLCDShowoutputresolution 1
20:59:43.8028 { } Screens/UserInterfacePositioner.py:66 InitOsd Setting OSD position: 0 720 0 576
20:59:43.8042 { } Screens/UserInterfacePositioner.py:70 setOSDAlpha Setting OSD alpha: 255
20:59:43.8057 { } Screens/UserInterfacePositioner.py:80 set3DMode Setting 3D mode: auto
20:59:43.8076 { } Screens/UserInterfacePositioner.py:102 set3DZnorm Setting 3D depth: 50
20:59:43.8221 { } Components/EpgLoadSave.py:74 stop [EPGC Save] Poller disabled.
20:59:43.8228 { } Components/EpgLoadSave.py:35 stop [EPGC Load] Poller disabled.
20:59:43.8371 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
20:59:43.8405 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
20:59:43.8439 [ W ] dvb_ci/dvbci.cpp:434 getSlot [CI] FIXME: request for unknown slot
20:59:44.4905 { } Plugins/Extensions/Kodi/server.py:10 <module> E2KODI_DEBUG_LVL = 40
20:59:44.9979 { } Plugins/Extensions/SubsSupport/e2_utils.py:442 getFonts [getFonts] fontDir: /usr/share/fonts/
20:59:45.1033 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Regular in skin_default.xml
20:59:45.1039 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Italic in skin_default.xml
20:59:45.1043 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Bold in skin_default.xml
20:59:45.1047 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Boldit in skin_default.xml
20:59:45.1050 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subtitlefont in skin_default.xml
20:59:45.1053 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font LCD in skin_default.xml
20:59:45.1057 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Replacement in skin_default.xml
20:59:45.1061 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Console in skin_default.xml
20:59:45.1159 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subs in skin_subtitles.xml
20:59:45.1162 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsi in skin_subtitles.xml
20:59:45.1166 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsb in skin_subtitles.xml
20:59:45.1169 { } Plugins/Extensions/SubsSupport/e2_utils.py:469 getFonts [getFonts] find font Subsz in skin_subtitles.xml
20:59:45.1173 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Roboto-Bold)
20:59:45.1181 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt_nonbold.ttf...OK (tuxtxt_nonbold)
20:59:45.1231 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/DejaVuSans.ttf...OK (DejaVuSans)
20:59:45.1348 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (tuxtxt)
20:59:45.1355 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/time.ttf...OK (time)
20:59:45.1386 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Roboto-BlackItalic)
20:59:45.1393 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (ae_AlMateen)
20:59:45.1400 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/lcd.ttf...OK (lcd)
20:59:45.1407 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/andale.ttf...OK (andale)
20:59:45.1457 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (valis_enigma)
20:59:45.1517 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (nmsbd)
20:59:45.1525 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Roboto-BoldItalic)
20:59:45.1532 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/md_khmurabi_10.ttf...OK (md_khmurabi_10)
20:59:45.1673 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Roboto-Black)
20:59:45.2103 { } Plugins/Extensions/SubsSupport/subtitles.py:213 <module> [SubsSupport] looking for custom colors in /usr/lib/enigma2/python/Plugins/Extensions/SubsSupport/colors.txt
20:59:45.2172 { } Plugins/Extensions/SubsSupport/subtitles.py:221 <module> [SubsSupport] adding custom color customcolor1
20:59:45.2411 { } Plugins/Extensions/Kodi/plugin.py:63 SaveDesktopInfo [XBMC] Desktop size [1280x720]
20:59:46.3676 < > gdi/font.cpp:160 AddFont [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TVweb/OpenSans-Regular.ttf...[FONT] failed: Operation not permitted
20:59:46.3682 [ ] bsod.cpp:305 oops PC: 7764ca6c
20:59:46.3682 [ ] bsod.cpp:311 oops 00000000 00000001 00000000 5680003e
20:59:46.3683 [ ] bsod.cpp:311 oops 76f6a724 7fdc8501 00000001 00f428e1
20:59:46.3683 [ ] bsod.cpp:311 oops 65747845 6f69736e 00000000 4872616c
20:59:46.3685 [ ] bsod.cpp:311 oops 65704f2f 6e61536e 65522d73 006c0000
20:59:46.3685 [ ] bsod.cpp:311 oops 00f428b8 8fb50048 00f428d0 00000000
20:59:46.3686 [ ] bsod.cpp:311 oops 7fdc84f0 0078ab30 72fa2fc8 7617e710
20:59:46.3686 [ ] bsod.cpp:311 oops 006be54c 7764c9fc fefefeff 00000000
20:59:46.3687 [ ] bsod.cpp:311 oops 776c5350 7fdc8440 72d6f510 0050e2dc
20:59:46.3854 [ ] bsod.cpp:328 print_backtrace Backtrace:
20:59:46.3859 [ ] bsod.cpp:336 print_backtrace /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x466EA8]
20:59:46.3860 [ ] bsod.cpp:336 print_backtrace linux-vdso.so.1(n/a) [0x77863560]
20:59:46.3860 [ ] bsod.cpp:336 print_backtrace /usr/lib/libfreetype.so.6(FT_Done_Face) [0x7764CA6E]
20:59:46.3861 [ ] bsod.cpp:348 handleFatalSignal -------FATAL SIGNAL
dmesg
<6>[ 0.046000] Bluetooth: L2CAP socket layer initialized
<6>[ 0.046000] Bluetooth: SCO socket layer initialized
<6>[ 0.047000] clocksource: Switched to clocksource wktmr
<5>[ 0.047000] FS-Cache: Loaded
<5>[ 0.054000] random: fast init done
<6>[ 0.056000] NET: Registered protocol family 2
<6>[ 0.057000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.057000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.057000] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.057000] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.057000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.057000] NET: Registered protocol family 1
<6>[ 0.058000] RPC: Registered named UNIX socket transport module.
<6>[ 0.058000] RPC: Registered udp transport module.
<6>[ 0.058000] RPC: Registered tcp transport module.
<6>[ 0.058000] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.059000] workingset: timestamp_bits=14 max_order=17 bucket_order=3
<5>[ 0.059000] FS-Cache: Netfs 'nfs' registered for caching
<5>[ 0.060000] NFS: Registering the id_resolver key type
<5>[ 0.060000] Key type id_resolver registered
<5>[ 0.060000] Key type id_legacy registered
<6>[ 0.060000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.060000] Installing knfsd (copyright (C) 1996 [email protected]).
<5>[ 0.060000] FS-Cache: Netfs 'cifs' registered for caching
<5>[ 0.060000] Key type cifs.spnego registered
<6>[ 0.060000] fuse init (API version 7.26)
<6>[ 0.067000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.067000] io scheduler noop registered
<6>[ 0.067000] io scheduler cfq registered (default)
<6>[ 0.067000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.068000] serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
<6>[ 0.068000] serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
<6>[ 0.069000] serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
<6>[ 0.076000] loop: module loaded
<6>[ 0.076000] ahci ahci.0: SSS flag set, parallel bus scan disabled
<6>[ 0.086000] ahci ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
<6>[ 0.086000] ahci ahci.0: flags: ncq sntf stag clo pmp slum part
<6>[ 0.091000] scsi host0: ahci
<6>[ 0.091000] scsi host1: ahci
<6>[ 0.092000] scsi host2: ahci
<5>[ 0.092000] ata1: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.092000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
<5>[ 0.092000] ata2: FORCE: PHY spd limit set to 3.0Gbps
<6>[ 0.092000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
<6>[ 0.092000] ata3: DUMMY
<6>[ 0.093000] brcmstb_nand: NAND controller driver is loaded
<6>[ 0.093000] libphy: Fixed MDIO Bus: probed
<7>[ 0.093000] __clk_enable: network [1]
<7>[ 0.093000] __clk_enable: enet [1]
<7>[ 0.093000] bcm40nm_pm_genet_enable 00
<6>[ 0.093000] bcmgenet bcmgenet.0: GENET 2.9 EPHY: 0x00b0
<4>[ 0.093000] bcmgenet bcmgenet.0: failed to get enet-eee clock
<6>[ 0.397000] ata1: SATA link down (SStatus 0 SControl 320)
<6>[ 0.701000] ata2: SATA link down (SStatus 0 SControl 320)
<6>[ 0.807000] libphy: bcmgenet MII bus: probed
<7>[ 0.807000] __clk_disable: enet [0]
<7>[ 0.807000] bcm40nm_pm_genet_disable 00
<7>[ 0.807000] __clk_disable: network [0]
<6>[ 0.807000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<7>[ 0.807000] __clk_enable: usb [1]
<7>[ 0.807000] bcm40nm_pm_usb_enable 00
<6>[ 0.807000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
<6>[ 0.807000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
<6>[ 0.815000] ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
<6>[ 0.822000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
<6>[ 0.822000] hub 1-0:1.0: USB hub found
<6>[ 0.822000] hub 1-0:1.0: 1 port detected
<6>[ 0.823000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
<6>[ 0.823000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
<6>[ 0.831000] ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
<6>[ 0.838000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
<6>[ 0.838000] hub 2-0:1.0: USB hub found
<6>[ 0.838000] hub 2-0:1.0: 1 port detected
<6>[ 0.839000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
<6>[ 0.839000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
<6>[ 0.846000] ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
<6>[ 0.853000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
<6>[ 0.853000] hub 3-0:1.0: USB hub found
<6>[ 0.853000] hub 3-0:1.0: 1 port detected
<6>[ 0.854000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
<6>[ 0.854000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
<6>[ 0.861000] ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
<6>[ 0.869000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
<6>[ 0.869000] hub 4-0:1.0: USB hub found
<6>[ 0.869000] hub 4-0:1.0: 1 port detected
<6>[ 0.870000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.870000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
<6>[ 0.870000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
<6>[ 0.870000] ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
<6>[ 0.932000] hub 5-0:1.0: USB hub found
<6>[ 0.932000] hub 5-0:1.0: 1 port detected
<6>[ 0.933000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
<6>[ 0.933000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
<6>[ 0.933000] ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
<6>[ 0.995000] hub 6-0:1.0: USB hub found
<6>[ 0.995000] hub 6-0:1.0: 1 port detected
<6>[ 0.996000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
<6>[ 0.996000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
<6>[ 0.996000] ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
<6>[ 1.058000] hub 7-0:1.0: USB hub found
<6>[ 1.058000] hub 7-0:1.0: 1 port detected
<6>[ 1.059000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
<6>[ 1.059000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
<6>[ 1.059000] ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
<6>[ 1.121000] hub 8-0:1.0: USB hub found
<6>[ 1.121000] hub 8-0:1.0: 1 port detected
<6>[ 1.122000] usbcore: registered new interface driver uas
<6>[ 1.122000] usbcore: registered new interface driver usb-storage
<6>[ 1.122000] mousedev: PS/2 mouse device common for all mice
<6>[ 1.122000] i2c /dev entries driver
<6>[ 1.122000] usbcore: registered new interface driver btusb
<6>[ 1.122000] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.122000] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.122000] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.122000] sdhci-brcmstb sdhci-brcmstb.0: Enabling controller
<4>[ 1.123000] mmc0: Failed to set 32-bit DMA mask.
<4>[ 1.123000] mmc0: No suitable DMA available - falling back to PIO
<6>[ 1.155000] mmc0: SDHCI controller on sdhci-brcmstb.0 [sdhci-brcmstb.0] using PIO
<6>[ 1.155000] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.155000] usbcore: registered new interface driver usbhid
<6>[ 1.155000] usbhid: USB HID core driver
<6>[ 1.155000] NET: Registered protocol family 17
<6>[ 1.156000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.156000] Bluetooth: HIDP socket layer initialized
<5>[ 1.156000] Key type dns_resolver registered
<6>[ 1.156000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
<6>[ 1.157000] EBI CS0: setting up NAND flash (primary)
<6>[ 1.157000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 1.157000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 1.157000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 1.158000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xdc
<6>[ 1.158000] nand: Hynix H27U4G8F2DTR-BC
<6>[ 1.158000] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
<6>[ 1.158000] brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
<6>[ 1.158000] Bad block table found at page 262080, version 0x01
<6>[ 1.158000] Bad block table found at page 262016, version 0x01
<5>[ 1.159000] Creating 3 MTD partitions on "brcmnand.0":
<5>[ 1.159000] 0x000000500000-0x000020000000 : "complete"
<5>[ 1.163000] 0x000000500000-0x000000b00000 : "kernel"
<5>[ 1.165000] 0x000000b00000-0x000020000000 : "rootfs"
<5>[ 1.169000] ubi0: default fastmap pool size: 200
<5>[ 1.169000] ubi0: default fastmap WL pool size: 100
<5>[ 1.169000] ubi0: attaching mtd2
<6>[ 1.373000] usb 6-1: new full-speed USB device number 2 using ohci-brcm
<5>[ 1.550000] ubi0: attached by fastmap
<5>[ 1.550000] ubi0: fastmap pool size: 200
<5>[ 1.550000] ubi0: fastmap WL pool size: 100
<5>[ 1.564000] ubi0: attached mtd2 (name "rootfs", size 501 MiB)
<5>[ 1.564000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
<5>[ 1.564000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
<5>[ 1.564000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
<5>[ 1.564000] ubi0: good PEBs: 4004, bad PEBs: 4, corrupted PEBs: 0
<5>[ 1.564000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
<5>[ 1.564000] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 1023305199
<5>[ 1.564000] ubi0: available PEBs: 0, total reserved PEBs: 4004, PEBs reserved for bad PEB handling: 76
<5>[ 1.564000] ubi0: background thread "ubi_bgt0d" started, PID 90
<6>[ 1.564000] ALSA device list:
<6>[ 1.564000] No soundcards found.
<3>[ 1.564000] Warning: unable to open an initial console.
<5>[ 1.566000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 91
<5>[ 1.616000] UBIFS (ubi0:0): recovery needed
<5>[ 1.671000] random: crng init done
<5>[ 1.825000] UBIFS (ubi0:0): recovery completed
<5>[ 1.825000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
<5>[ 1.825000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
<5>[ 1.825000] UBIFS (ubi0:0): FS size: 496603136 bytes (473 MiB, 3911 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
<5>[ 1.825000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
<5>[ 1.825000] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID 9BA56B48-16E7-485C-B5C5-CC6BAF2BC7D5, small LPT model
<6>[ 1.827000] VFS: Mounted root (ubifs filesystem) on device 0:12.
<6>[ 1.829000] devtmpfs: mounted
<6>[ 1.829000] Freeing unused kernel memory: 276K
<4>[ 1.829000] This architecture does not have kernel memory protection.
<4>[ 2.827000] formuler1_1: module_layout: kernel tainted.
<4>[ 2.827000] Disabling lock debugging due to kernel taint
<4>[ 2.827000] formuler1_1: loading out-of-tree module taints kernel.
<6>[ 2.831000] usbcore: registered new interface driver tpm
<6>[ 8.229000] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[ 8.230000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[ 8.303000] dvbdev: DVB: registering new adapter (dvb0)
<6>[ 8.305000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[ 8.325000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
<6>[ 8.644000] input: front panel as /devices/virtual/input/input2
<6>[ 8.709000] Registered IR keymap rc-cec
<6>[ 8.710000] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[ 8.710000] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[ 8.981000] SGI XFS with security attributes, realtime, no debug enabled
<4>[ 9.031000] boxmodel: module license 'proprietary' taints kernel.
<6>[ 9.445000] usbcore: registered new interface driver cdc_acm
<6>[ 9.445000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 11.912000] NET: Registered protocol family 10
<6>[ 11.914000] Segment Routing with IPv6
<7>[ 12.229000] __clk_enable: network [1]
<7>[ 12.229000] __clk_enable: enet [1]
<7>[ 12.229000] bcm40nm_pm_genet_enable 00
<6>[ 12.354000] bcmgenet bcmgenet.0: configuring instance for external RGMII (TX delay)
<6>[ 12.354000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 13.538000] bcmgenet bcmgenet.0 eth0: Link is Down
<6>[ 16.813000] bcmgenet bcmgenet.0 eth0: Link is Up - 1Gbps/Full - flow control off
<6>[ 16.813000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<3>[ 18.332000] UBIFS error (ubi0:0 pid 542): do_readpage: bad data node (block 0, inode 18997)
<3>[ 18.332000] magic 0x6101831
<3>[ 18.332000] crc 0x6f4857da
<3>[ 18.332000] node_type 1 (data node)
<3>[ 18.332000] group_type 2 (last of node group)
<3>[ 18.332000] sqnum 286817
<3>[ 18.332000] len 68
<3>[ 18.332000] key (18997, data, 0)
<3>[ 18.332000] size 19
<3>[ 18.332000] compr_typ 0
<3>[ 18.332000] data size 20
<3>[ 18.332000] data:
<3>[ 18.332000] 00000000: 35 39 33 34 36 35 39 31 34 38 39 34 33 33 31 34 36 35 30 0a
<3>[ 18.332000] UBIFS error (ubi0:0 pid 542): do_readpage: cannot read page 0 of inode 18997, error -22


Haber que me aconsejáis por favor y gracias de nuevo, muchas gracias. Sl2.

 

[evox]

Prueba a conectar por telnet y envia este comando para desistalar el tvweb.

opkg remove enigma2-plugin-extensions-tvweb

Haber si lo desistala bien y tras ello arranca, si da algun error ponmelo.

Salu2.

 

[Apolo Cuarto]

Prueba a conectar por telnet y envia este comando para desistalar el tvweb.

opkg remove enigma2-plugin-extensions-tvweb

Haber si lo desistala bien y tras ello arranca, si da algun error ponmelo.

Salu2.

Intento entrar, pero a la hora de poner la contraseña no me deja escribirla. Osea pongo en login: root y me sale pasword, pero no me deja escribirla.

 

[evox]

Intento entrar, pero a la hora de poner la contraseña no me deja escribirla. Osea pongo en login: root y me sale pasword, pero no me deja escribirla.

Si es con putty si te deja lo ke pasa ke no salen tu pon el pass y das a enter.

Salu2

Enviado desde Tapatalk 2

 

[Apolo Cuarto]

Intento entrar, pero a la hora de poner la contraseña no me deja escribirla. Osea pongo en login: root y me sale pasword, pero no me deja escribirla.

por putty si y me sale esto:

No packages removed.

 

[evox]

Pues entra por ftp y borra la carpeta entera del tvweb la tienes en /usr/lib/enigma2/python/Plugins/Extensions

Salu2.

 

[Apolo Cuarto]

Pues entra por ftp y borra la carpeta entera del tvweb la tienes en /usr/lib/enigma2/python/Plugins/Extensions

Salu2.

Muchas Gracias!!!!!!, ya zurula esto tío, la culpa es mía, estaba probando la imagen a las tantas de la noche y estaba muerto de sueño, he instale y desinstalé el tvweb y no reinicie en condiciones la imagen y eso a lo mejor es lo que ha corrompido el inicio de la imagen. Muchas gracias de verdad por tu ayuda ya he aprendido algo nuevo hoy. Te debo unas cervecitas!!!! , Sl2.

 

[evox]

Muchas Gracias!!!!!!, ya zurula esto tío, la culpa es mía, estaba probando la imagen a las tantas de la noche y estaba muerto de sueño, he instale y desinstalé el tvweb y no reinicie en condiciones la imagen y eso a lo mejor es lo que ha corrompido el inicio de la imagen. Muchas gracias de verdad por tu ayuda ya he aprendido algo nuevo hoy. Te debo unas cervecitas!!!! , Sl2.

Me alegro, tomo nota de las birras jejejejeje, te aconsejo no instalar el tvweb esta ya obsoleto y sin soporte y cada vez mas pasaran estas cosas.

Salu2.

 

[Apolo Cuarto]

cada vez mas pasaran estas cosas.

Salu2.

Porque dices esto?, que pasa que no ahí mucho soporte sobre los plugins o extensiones que puedes instalar en la imagen?. Instale el you tube y la verdad, que me gusta mas meterme en el you tube desde la smart tv, (mas cómodo). También le he instalado kodi y lo estoy trasteando lo voy a configurar haber si zurula en condiciones. Con eso estoy mas que sobrado. Bueno no te entretengo mas, saludos y muchas gracias colega por la ayuda.