How to upgrade Firmware using a USB stick.
Ensure your USB stick is FAT or FAT32 formatted.
The update files are initially named similar to this - azbox-0.9.4283-patch.bin
Copy the file to your USB stick.
Rename the file to read - patch.bin i.e. by removing the characters - azbox-0.9.4283-
Right click the file, select "Properties" and then select the "General" page the file should read only - patch
On the "Details" page and the "file name" should read - patch.bin
Power UP the Receiver with the updated USB stick Inserted.
Choose 1.USB - The receiver will then search for a valid patch.
When found will give details of Your Version on the Receiver, and the Patch version.
Also asks if you want to update. - Press OK.
The patch file is then extracted, with details of the progress shown on the TV screen.
Also there is also a warning: DO NOT POWER OFF.
After the patch is loaded, the Receiver will reboot itself, returning to the Upgrade menu.
Choose 5. Boot without update.
When the Receiver is rebooted, remove the USB stick.
Ensure your USB stick is FAT or FAT32 formatted.
The update files are initially named similar to this - azbox-0.9.4283-patch.bin
Copy the file to your USB stick.
Rename the file to read - patch.bin i.e. by removing the characters - azbox-0.9.4283-
Right click the file, select "Properties" and then select the "General" page the file should read only - patch
On the "Details" page and the "file name" should read - patch.bin
Power UP the Receiver with the updated USB stick Inserted.
Choose 1.USB - The receiver will then search for a valid patch.
When found will give details of Your Version on the Receiver, and the Patch version.
Also asks if you want to update. - Press OK.
The patch file is then extracted, with details of the progress shown on the TV screen.
Also there is also a warning: DO NOT POWER OFF.
After the patch is loaded, the Receiver will reboot itself, returning to the Upgrade menu.
Choose 5. Boot without update.
When the Receiver is rebooted, remove the USB stick.